CLAAS DIRECT DISC 520 DIRECT DISC 520 CONTOUR JAGUAR 900 890 870 850 830 Operator’s Manual

Description

CLAAS DIRECT DISC 520 DIRECT DISC 520 CONTOUR JAGUAR 900 890 870 850 830 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS DIRECT DISC 520 DIRECT DISC 520 CONTOUR JAGUAR 900 890 870 850 830 Operator’s Manual – PDF DOWNLOAD

INTRODUCTION :

This operator’s manual provides information on the use, adjustment and operation of the CLAAS »DIRECT DISC« cutter unit. Note that in the following chapters the CLAAS »DIRECT DISC« cutter unit is also referred to as the front attachment. Follow the advice on correct maintenance and servicing in order to ensure maximum performance and a long service life of your front attachment.

• Also, have assembly of your front attachment and regular inspections carried out by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time.
• By ensuring correct operation, and carrying out maintenance and service work with care, you will be able to make full use of state-of-the-art technology and of the experience with which your front attachment has been designed.

• Note that in the following chapters the CLAAS »DIRECT DISC« cutter unit is also referred to as the front attachment. The instructions set forth in this manual must be read carefully and followed by all persons concerned with the operation, maintenance, repair or inspection of the front attachment in order to prevent accidents.
• Some safety guards and covers have been removed for illustration in this manual. All safety shields and covers must be attached before the front attachment is put into operation. In particular, read the sections “Safety rules” and “Prior to operation” in the operating instructions CLAAS JAGUAR 900, 890, 870, 850, 830.

TABLE OF CONTENTS:

CLAAS DIRECT DISC 520 DIRECT DISC 520 CONTOUR JAGUAR 900 890 870 850 830 Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 1 1
Validity 1 1
2 Table of contents 2 1
3 Preface
Of special importance 3 1
Type plate 3 2
Road transport 3 3
Protective equipment for road transport 3 4
4 Safety rules
Designated use 4 1
Identification of warnings and danger signs 4 1
General safety and accident prevention instructions 4 1
Safety decals with pictorials 4 3
Safety prop 4 8
5 Specifications
DIRECT DISC 520 / 520 Contour 5 1
6 Assembly
Loading and unloading the front attachment 6 1
Attaching the front attachment for the first time 6 2
Front attachment 6 3
Installing cutter bar skids 6 3
Attaching and removing prop stands 6 4
Adjustments on forage harvester 6 5
Additional weight 6 5
Required additional weights 6 5
Order numbers – additional weights 6 6
Shipping package forage harvester attachment set 6 6
Installing »DIRECT DISC« drive
pulley in forage harvester 6 8
Raising potentiometer 6 8
Installing additional hydraulic connections 6 10
Fit wiring harness for ESR Module 6 14
ESR Module 6 16
Adjusting drop rate 6 17
Conversion valve for front attachments
(Additional equipment chopper) 6 18
7 Before operation
Check and observe the following before putting into operation 7 1
Attaching front attachment 7 2
Open lock 7 3
Attach front attachment 7 3
Close lock 7 4
Connecting hydraulics 7 4
Positioning v-belts for mower drive 7 5
Connecting electrics 7 7
Mounting universal drive shaft 7 8
Setting the paddle roller 7 9
Hydraulic paddle roller adjustment
(Additional equipment only DIRECT DISC 520 Contour) 7 10
Adjusting cutter bar skids 7 11
Setting cutter bar inclination 7 11
Working and transport position 7 12
Transport position 7 12
Working position 7 12
Removing and storing the front attachment 7 13
8 Operation
Operation 8 1
Raising and lowering the front attachment 8 1
Operating front attachment 8 2
Instructions for mowing 8 4
Difficult application conditions 8 5
Adjusting cutting height 8 5
Lock/unlock the pendulum frame
(DIRECT DISC 520 Contour) 8 6
Adjusting length of cut 8 7
Additional equipment 8 8
Hydraulic paddle roller adjustment
(R03/0100, only DIRECT DISC 520 Contour) 8 8
Feed hats (D03/0080) 8 9
Additional damping (R05/0060) 8 9
9 Maintenance
Important maintenance instructions 9 1
Hydraulic system 9 1
Bolts 9 1
Lubrication 9 1
Guards 9 1
Drive systems 9 2
Gearbox 9 2
Intake auger gearbox (A) 9 3
Angle drive – drive intake auger (B) 9 4
Angle drive – mower drive (C) 9 4
Clutches (D, E) 9 5
Chains 9 6
Lubricating the drive chain 9 6
Tensioning drive chain 9 6
V-belts 9 7
Checking V-belts 9 7
Tensioning V-belts 9 7
V-belt guide 9 8
Spring adjustment 9 9
Spring tension of intake auger 9 9
Pendulum frame (only DIRECT DISC 520 Contour) 9 9
Universal drive shafts 9 10
Servicing the universal drive shaft 9 10
General information on universal drive shafts 9 10
Cutter bar (F) 9 11
Oil level check 9 12
Oil change 9 13
Draining oil 9 13
Mower blades 9 14
Replacing mower blades 9 14
Attaching mower blades 9 16
Table of contents
2 2 BA DIRECT DISC 520 / 520 Contour – 0299 924 2
Table of contents
Cutting discs 9 17
Replacing cutting discs 9 17
Electrical 9 18
Sensor adjustment 9 18
Hydraulic system 9 18
Hydraulic hose connections 9 18
Guards 9 19
Sheet metal cover 9 19
Side guards 9 20
Top side guards 9 20
Lock 9 21
Adjusting lock 9 21
Adjusting locking pins 9 22
Screw connections 9 22
Connection elements 9 22
End of season storage 9 23
Faults 9 23
10 Lubrication Chart
Safety rules 10 1
Lubricants 10 1
Lubrication 10 1

CLAAS DIRECT DISC 520 DIRECT DISC 520 CONTOUR JAGUAR 900 890 870 850 830 OPERATOR’S MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V