CLAAS DISCO 3050 FC PLUS 3050 FC 3050 F PLUS 3050 F 3000 FC Assembly & Operating instructions Manual

Description

CLAAS DISCO 3050 FC PLUS 3050 FC 3050 F PLUS 3050 F 3000 FC Assembly & Operating instructions Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS DISCO 3050 FC PLUS 3050 FC 3050 F PLUS 3050 F 3000 FC Assembly & Operating instructions Manual – PDF DOWNLOAD

INTRODUCTION :

This operator’s manual provides information concerning the use, adjustment, setting and operation of the CLAAS disc mower. Please note that in the following chapter the CLAAS Disc Mower is also referred to as the machine. Follow the advice on correct maintenance and servicing in order to ensure maximum performance and a long service life of your machine.

• In addition, assembly of your machine and regular inspections must be carried out by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time.
• Make use of the experience and latest knowledge embodied in this machine by operating and maintaining it properly, then your cutting mechanism, mower unit will always produce good results.

  These operating instructions apply for all disc mowers:
  DISCO 3050 FC Plus / 3050 FC / 3050 F Plus /
  3050 F / 3000 FC
  Type 651
  from machine No. 651 0 1001.

TABLE OF CONTENTS:

CLAAS DISCO 3050 FC PLUS 3050 FC 3050 F PLUS 3050 F 3000 FC Assembly & Operating instructions Manual – PDF DOWNLOAD

1 Introduction .................................................................... 4
	Introduction .................................................................. 4
		Validity .................................................................. 4
2 Table of contents ............................................................... 5
3 Preface ......................................................................... 6
	Of special importance ......................................................... 6
	Identification plate .......................................................... 6
4 Safety Rules .................................................................... 7
	Intended use .................................................................. 7
	Identification of warning and danger signs .................................... 7
	General safety and accident prevention instructions ........................... 7
	Attached machines ............................................................. 9
	Attached devices .............................................................. 9
	PTO Operation ................................................................. 9
	Hydraulic system .............................................................. 9
	Tyres .........................................................................10
	Maintenance ...................................................................10
	Sound pressure level ..........................................................10
	Safety decals with pictorials .................................................11
5 Specifications ..................................................................15
	DISCO 3050 F Plus DISCO 3050 F ................................................15
	DISCO 3050 FC Plus DISCO 3050 FC ..............................................15
	DISCO 3000 FC .................................................................15
	Calculating the axial loads, minimum ballast and total weight .................16
	Noise level of the disc mower .................................................19
6 Prior to Operation ..............................................................20
	Loading and unloading machine .................................................20
	Fitting .......................................................................21
		Fitting the blades ........................................................22
		Mounting the deflector hood ...............................................23
	Check and observe the following before putting into operation! ................24
		Mounting universal drive shaft ............................................25
			Fitting on CLAAS Celtis ...............................................26
		Matching the universal drive shaft ........................................27
			Changing the direction of rotation ....................................28
	Attachment to the tractor .....................................................29
		Setting the upper link ....................................................29
		Weight relief .............................................................30
		Fitting examples ..........................................................33
	Removing the machine ..........................................................35
	Prior to transportation .......................................................36
		Driving on public roads ...................................................36
7 Operation .......................................................................38
	Operation .....................................................................38
		Working position ..........................................................38
		Setting the cutting height ................................................39
			High cut: .............................................................39
			Low cut: ..............................................................39
		Ground adjustment .........................................................39
		Safety equipment ..........................................................40
		Transport position ........................................................40
		Changing the swathe width .................................................41
			DISCO 3050 FC Plus / 3050 FC / 3000 FC ................................41
			DISCO 3050 F Plus / 3050 F ............................................41
		Conditioner ...............................................................41
		Changing the conditioner speed ............................................41
		Mowing ....................................................................42
			Recommendations for environmental protection ..........................43
	Optional equipment ............................................................45
		High cutting runners ......................................................45
		Push-on runners ...........................................................45
		Kit for detachable forks ..................................................45
		Wide deflector device DISCO 3050 FC Plus / 3050 FC / 3000 FC ..............45
		Three point elevation .....................................................46
8 Maintenance .....................................................................47
	Important maintenance instructions ............................................47
		Bolts .....................................................................47
		Lubrication ...............................................................47
		Guards (safety frame) .....................................................47
	Drive systems .................................................................48
		Tightening the conditioner drive belt .....................................48
			Gearbox ...............................................................49
		Mower head ................................................................50
	Mower blades ..................................................................52
		Replacing mower blades ....................................................52
			Mower blade box .......................................................53
		Mower blade quick change system DISCO 3050 FC Plus / DISCO 3050 F Plus ....54
		Screwed mower blades DISCO 3050 FC / 3050 F / 3000 FC .....................59
		Attaching mower blades ....................................................61
	Mower discs ...................................................................62
		Replacing cutting discs ...................................................62
		Arrangement of the pinion units ...........................................64
		Fitting the pinion units ..................................................64
	Conditioner tines .............................................................65
		Fitting / removing the tines ..............................................65
	Universal drive shaft .........................................................66
		Maintenance of the disc coupling ..........................................66
		Torques ...................................................................66
	Screw connections .............................................................67
	Connecting elements ...........................................................67
	End of season storage .........................................................67
	Malfunctions ..................................................................68
9 Lubrication chart ...............................................................70
	Safety Rules ..................................................................70
	Lubricants ....................................................................70
	Lubrication ...................................................................70

CLAAS DISCO 3050 FC PLUS 3050 FC 3050 F PLUS 3050 F 3000 FC ASSEMBLY & OPERATING INSTRUCTIONS MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V