Claas DISCO 3050 TC Plus 3050 TC AS Plus 3050 AS Plus 3050 TRC Plus 3050 TRC AS Plus 3050 TC Plus FLAP GROUPER Operator’s Manual

Description

Claas DISCO 3050 TC Plus 3050 TC AS Plus 3050 AS Plus 3050 TRC Plus 3050 TRC AS Plus 3050 TC Plus FLAP GROUPER Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas DISCO 3050 TC Plus 3050 TC AS Plus 3050 AS Plus 3050 TRC Plus 3050 TRC AS Plus 3050 TC Plus FLAP GROUPER Operator’s Manual

INTRODUCTION

• This operator’s manual contains information on the application, adjustment and operation of the CLAAS disc mower. Please note that in the following chapters, the CLAAS disc mower is also referred to simply as the machine or the mower unit.
• Follow the instructions on care and maintenance of the machine to keep it in good working order and to ensure long service life. Have the machine assembled and regular inspections carried out by an authorised workshop.
• Failure to service or operate the machine correctly can lead to reduced performance and cost time. Take advantage of the experience which has gone into the development of this state-of-the-art equipment, follow the instructions on operation and care of the machine, and your mower unit will always serve you well.

TABLE OF CONTENTS:

Claas DISCO 3050 TC Plus 3050 TC AS Plus 3050 AS Plus 3050 TRC Plus 3050 TRC AS Plus 3050 TC Plus FLAP GROUPER Operator’s Manual

21 Machine description
Machine description 11
2 Introduction
Introduction 21
Validity 21
3 Table of contents 31
4 Preface
Important information 41
Identification plate 42
5 Safety rules
Intended use 51
Identification of warning and danger signs 51
General safety and accident prevention regulations 51
Attached machines 53
Trailed machines 53
PTO operation 53
Hydraulic system 53
Tyres 54
Maintenance 54
Noise pressure level 54
Safety decals with pictorials 55
6 Specifications
Specifications 61
Noise pressure level 63
Measuring system 63
7 Prior to operation
Loading and unloading machine 71
Initial assambly of machine 72
Check and observe the following before putting into operation! 72
Attachment to the tractor 73
Changing PTO speed 74
Adjusting drawbar radius 75
Hitch pins 76
Universal drive shaft 76
Check profile overlap 76
Shortening universal drive shaft 77
Mounting universal drive shaft on machine side 79
Connecting universal drive shaft on tractor side 710
Wide angle-synchronising joint 711
Hydraulic connection 711
Chassis stop valves 712
Drawbar stop valve 712
Stop valve DISCO 3050 TC Plus FLAPGROUPER 713
Electric connection 713
Filling tyres
(only DISCO 3050 TC Plus / TRC Plus) 714
Propstand 715
Pullrope (only DISCO 3050 TC Plus FLAPGROUPER) 715
Lowering the machine 716
Prior to transportation 718
Driving on public roads 720
8 Operation
Field operation 81
Working position 81
Adjusting cutting height 84
Setting mower unit discharge 85
Adjusting lifting height 86
Adjusting the conditioner
DISCO 3050 TC Plus / TC AS Plus / AS Plus /
TC Plus FLAPGROUPER 87
Adjusting the conditioner speed
DISCO 3050 TC Plus / TC AS Plus / AS Plus /
TC Plus FLAPGROUPER 87
Adjusting the swath width
DISCO 3050 TC Plus / TC AS Plus / AS Plus / TRC AS Plus 88
Adjusting the swath boards
DISCO 3050 TC Plus FLAPGROUPER 89
Tightening the swath boards manually
DISCO 3050 TC Plus FLAPGROUPER 89
Adjusting the cross conveyor
DISCO 3050 TC AS Plus / AS Plus / TRC AS Plus 810
Adjust flap 810
Cross conveyor – set cast 810
Operating mower unit 811
Instructions for mowing 813
Recommendations for environmental protection 814
Mowing with cross conveyor
DISCO 3050 TC AS Plus / AS Plus / TRC AS Plus 815
Mowing with cross conveyor and front mower unit
DISCO 3050 TC AS Plus / AS Plus / TRC AS Plus 815
Mowing without cross conveyor
DISCO 3050 TC AS Plus / AS Plus / TRC AS Plus 816
Mowing with the Flapgrouper
DISCO 3050 TC Plus FLAPGROUPER 816
Difficult operating conditions 817
Transport position 818
Additional equipment 820
High-cutting runners 820
Reinforcement runners 820
Slip-on yoke kit 820
Hydraulic connections for tractors 820
Width distribution hood 821
Electrical raising mechanism 821
USA light adapter 821
9 Maintenance
Important maintenance instructions 91
Wheels / Tyres 91
Hydraulic system 91
Screws 91
Lubrication 92
Safety devices (safety guards) 92
Table of contents
000 293 4782 – BA DISCO 3050 TC Plus / TC AS Plus / AS Plus / TRC Plus / TRC AS Plus / TC Plus FLAPGROUPER 32
Table of contents
Gearbox 93
Main gearbox 93
Angle drive 95
Mower head 96
Drive mechanism 99
V-belts 99
Check V-belts 99
Tighten V-belts of conditioner 910
Tightening V-belts of hydraulic unit 910
Universal drive shaft 911
General information for universal drive shafts 911
Mounting/dismounting universal drive shaft guard 912
Clutches 914
Maintenance of friction-freewheel clutch 914
Renew friction discs 914
Mower blades 915
Mower knife box 916
Replacing mower blades 917
Mower blade quick-change system 918
Mower knife bracket
(mower blade quick-change system) 921
Cutting discs 923
Replacing cutting discs 923
Cutting disc attachment 924
Cleaning drain hole 924
Check anti-wear bars 924
Fitting rack and pinion units 925
Conditioner tines 926
Fitting / removing the tines 926
Adjusting the conditioner
DISCO 3050 TRC Plus / TRC AS Plus 927
Setting roller spacing 927
Setting roller tension 927
Cross conveyor DISCO 3050 TC AS Plus / AS Plus /
TRC AS Plus 928
Cross conveyor tension 928
Clean belt scraper 928
Hydraulics 930
Refilling with hydraulic oil 930
Hydraulic hose connections 930
Safety devices 931
Hood 931
Side panel 932
Anti-wrapping device 933
Bolt fasteners 934
Fasteners 934
Cleaning and care 934
Winter storage 935
Malfunctions 936
10 Lubrication chart
Safety rules 101
Lubricants 101
IMAGES PREVIEW OF THE MANUAL:

CLAAS DISCO 3050 TC PLUS 3050 TC AS PLUS 3050 AS PLUS 3050 TRC PLUS 3050 TRC AS PLUS 3050 TC PLUS FLAP GROUPER OPERATOR’S MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M