CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual DE_EN_DA

Description

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual DE_EN_DA – PDF DOWNLOAD

DESCRIPTION:

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual DE_EN_DA – PDF DOWNLOAD

INTRODUCTION:

These fitting and operating instructions contain additional notes for the DISCO operator’s manual. They provide information about attachment, adjustment and maintenance of the swathe displacer. Information concerning use, adjustment and operation of the CLAAS disc mower can be obtained from the DISCO operator’s manual 188 612.7.

• If you follow the advise given for correct care and maintenance of your machine then it will always enjoy readiness to operate and a long working life.
• Also have the assembly of your machine and regular inspections undertaken by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time.
• If you can obtain full use of the much experience and new insights invested into the machine through correct operation and meticulous care then you will find that your mower unit performs very well.

TABLE OF CONTENTS:

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual DE_EN_DA – PDF DOWNLOAD

1 Introduction
Introduction 1 1
2 Table of contents
3 Preface
Of special importance 3 1
4 Safety Instructions
Of special importance 4 1
Identification of warnings and dangers 4 1
Designated use 4 2
Safety decals with warning symbols 4 2
General safety instructions 4 2
Safety decals with pictorials 4 3
5 Specifications
DISCO 8550 AS Plus 5 1
6 Assembly
Use as a front-rear combination 6 1
Preparing the mower unit 6 1
Removing the safety cover/shifting the cover 6 2
Folding up the safety curtain 6 2
Shifting the guide plates on the crop spreader 6 2
Attaching the outer guide plates 6 3
Adjusting outer guide plates 6 3
Mounting the swath displacer for the first time 6 4
Fitting the hydraulic hose 6 4
Mounting the central frame 6 4
Hydraulic connection 6 6
Electrical connection 6 7
Attaching the belts to the supporting arms of the swath
displacer 6 8
Check and adjust the setting of the belts to the mower unit 6 9
Mounting the balance springs 6 10
Mounting flotation springs to the supporting arms 6 11
Coupling the swath displacer to the mower units 6 12
Adjusting the belt and mower unit in the transport position 6 13
Connecting hydraulic hoses to the hydraulic motor 6 14
Mounting the side safety curtains 6 14
Attaching the side safety curtains 6 15
Mounting the lighting 6 15
7 Prior to operation
Use as a front-rear combination 7 1
Attaching the swath displacer 7 1
Check and observe the following before putting into operation! 7 3
Unhitching the swath displacer 7 4
Unhooking the side safety curtains 7 4
Uncoupling the swath displacer from the mower unit 7 4
Removing the flotation springs from the supporting arms 7 5
Disconnecting electrical connections 7 6
Disconnecting the hydraulic system 7 6
Mounting the safety devices 7 8
Repositioning the guide plates of the crop spreader 7 8
Adjusting the guide plates 7 8
Prior to transportation 7 9
Driving on public roads 7 10
8 Operation
Operation 8 1
Function of the swath displacer 8 1
Mowing with the swath displacer 8 1
Before mowing 8 1
Setting up the swath displacer 8 1
Adjusting the flap 8 2
Adjusting the guide plates of the crop spreader 8 2
Adjusting outer guide plates 8 3
Adjusting the swath width 8 3
Raising and lowering the belts 8 4
Adjusting the belt speed 8 4
Oil cooler for the on-board hydraulics 8 4
Mowing without the swath displacer 8 5
Raising and lowering the left and right-hand belts 8 6
Mounting the safety devices 8 6
Folding the safety curtain 8 6
Relocating the guide plates of the crop spreader 8 7
Adjusting guide plates 8 7
Emergency functions 8 8
9 Maintenance
Important maintenance instructions 9 1
Hydraulic system 9 1
Bolts 9 1
Lubrication 9 1
Guards (safety frame) 9 1
Hydraulic system 9 2
Hydraulic hose connections 9 2
Hydraulic oil tank for the on-board hydraulics 9 3
Cleaning the oil cooler 9 3
Filling with oil 9 3
Oil change 9 3
Changing the filter 9 3
Drive systems 9 4
Pump gearbox 9 4
Filling with oil 9 4
Oil change 9 4
Drive shaft 9 5
Tension of the conveyor belt 9 5
Cleaning the belt scraper 9 6
Balance spring tension 9 7
Flotation spring tension 9 7
Screw connections 9 8
Connecting elements 9 8
End of season storage 9 8
10 Lubrication Chart
Safety Instructions 10 1
Lubricants 10 1
Lubrication 10 1

CLAAS DISCO 8550 AS PLUS SUPPLEMENT TO THE FITTING AND OPERATING INSTRUCTIONS MANUAL DE_EN_DA:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V