CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual_DE_EN_FR_

Description

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual_DE_EN_FR_

DESCRIPTION:

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual_DE_EN_FR_

INTRODUCTION

Note:

Operation of the DISCO 8550 AS Plus is only possible with a towed front-rear combination!

These fitting and operating instructions contain additional notes for the DISCO operator’s manual. They provide information about attachment, adjustment and maintenance of the swathe displacer. Information concerning use, adjustment and operation of the CLAAS disc mower can be obtained from the DISCO operator’s manual 188 612.7.

If you follow the advise given for correct care and maintenance of your machine then it will always enjoy readiness to operate and a long working life. Also have the assembly of your machine and regular inspections undertaken by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time. If you can obtain full use of the much experience and new insights invested into the machine through correct operation and meticulous care then you will find that your mower unit performs very well.
TABLE OF CONTENTS:

CLAAS DISCO 8550 AS Plus Supplement to the Fitting and Operating Instructions Manual_DE_EN_FR_

1 Introduction
Introduction 11
2 Table of contents
3 Preface
Of special importance 31
4 Safety Instructions
Of special importance 41
Identification of warnings and dangers 41
Designated use 42
Safety decals with warning symbols 42
General safety instructions 42
Safety decals with pictorials 43
5 Specifications
DISCO 8550 AS Plus 51
6 Assembly
Use as a front-rear combination 61
Preparing the mower unit 61
Removing the safety cover/shifting the cover 62
Folding up the safety curtain 62
Shifting the guide plates on the crop spreader 62
Attaching the outer guide plates 63
Adjusting outer guide plates 63
Mounting the swath displacer for the first time 64
Fitting the hydraulic hose 64
Mounting the central frame 64
Hydraulic connection 66
Electrical connection 67
Attaching the belts to the supporting arms of the swath
displacer 68
Check and adjust the setting of the belts to the mower unit 69
Mounting the balance springs 610
Mounting flotation springs to the supporting arms 611
Coupling the swath displacer to the mower units 612
Adjusting the belt and mower unit in the transport position 613
Connecting hydraulic hoses to the hydraulic motor 614
Mounting the side safety curtains 614
Attaching the side safety curtains 615
Mounting the lighting 615
7 Prior to operation
Use as a front-rear combination 71
Attaching the swath displacer 71
Check and observe the following before putting into operation! 73
Unhitching the swath displacer 74
Unhooking the side safety curtains 74
Uncoupling the swath displacer from the mower unit 74
Removing the flotation springs from the supporting arms 75
Disconnecting electrical connections 76
Disconnecting the hydraulic system 76
Mounting the safety devices 78
Repositioning the guide plates of the crop spreader 78
Adjusting the guide plates 78
Prior to transportation 79
Driving on public roads 710
8 Operation
Operation 81
Function of the swath displacer 81
Mowing with the swath displacer 81
Before mowing 81
Setting up the swath displacer 81
Adjusting the flap 82
Adjusting the guide plates of the crop spreader 82
Adjusting outer guide plates 83
Adjusting the swath width 83
Raising and lowering the belts 84
Adjusting the belt speed 84
Oil cooler for the on-board hydraulics 84
Mowing without the swath displacer 85
Raising and lowering the left and right-hand belts 86
Mounting the safety devices 86
Folding the safety curtain 86
Relocating the guide plates of the crop spreader 87
Adjusting guide plates 87
Emergency functions 88
9 Maintenance
Important maintenance instructions 91
Hydraulic system 91
Bolts 91
Lubrication 91
Guards (safety frame) 91
Hydraulic system 92
Hydraulic hose connections 92
Hydraulic oil tank for the on-board hydraulics 93
Cleaning the oil cooler 93
Filling with oil 93
Oil change 93
Changing the filter 93
Drive systems 94
Pump gearbox 94
Filling with oil 94
Oil change 94
Drive shaft 95
Tension of the conveyor belt 95
Cleaning the belt scraper 96
Balance spring tension 97
Flotation spring tension 97
Screw connections 98
Connecting elements 98
End of season storage 98
10 Lubrication Chart
Safety Instructions 101
Lubricants 101
Lubrication 101
IMAGES PREVIEW OF THE MANUAL:

CLAAS DISCO 8550 AS PLUS SUPPLEMENT TO THE FITTING AND OPERATING INSTRUCTIONS MANUAL_DE_EN_FR_:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

s.m