CLAAS DISCO 9400 C DUO Conversion to frontrear combination Conversion to towed rear combination Conversion instructions Manual – PDF DOWNLOAD

Description

CLAAS DISCO 9400 C DUO Conversion to frontrear combination Conversion to towed rear combination Conversion instructions Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS DISCO 9400 C DUO Conversion to frontrear combination Conversion to towed rear combination Conversion instructions Manual – PDF DOWNLOAD

Introduction
Safety rules

The work described in this manual may be carried out only by a qualified specialist workshop with trained skilled staff. Prior to fitting or converting:

► Read and follow safety instructions in all Operator’s Manuals: Operator’s Manual of the machine or product intended for fitting or installation Operator’s Manual of the product to be fitted or installed

► Observe the safety decals applied to the machine and the product.

► Observe general safety instructions, accident prevention rules and environmental protection regulations.

► Stop and secure the machine and the product.

► Carry out work beneath the raised machine, beneath raised implements or raised components only if these units are securely supported.

► Lower down the machine, front attachment and hydraulically actuated components prior to any work on the hydraulic system. Depressurize the system.

► Relieve the pressure of pre-stressed energy accumulators (springs, accumulators, hydraulic cylinders) and of components pressurized by energy accumulators. After fitting or converting:

► Clean any soiled safety decals. Replace any unidentifiable or missing safety decals.

► Refit any removed protective guards and other components and set them to their protective position before putting into operation again.

► Check if all bolts are tightly seated.

► Perform a function test. Introduction Safety rules 2793-001 00
TABLE OF CONTENTS:

CLAAS DISCO 9400 C DUO Conversion to frontrear combination Conversion to towed rear combination Conversion instructions Manual – PDF DOWNLOAD

Table of contents
Introduction
Notes on the manual 4
Identifying warnings 6
Safety rules 7
Front/rear-mounted combination
Check list 8
Work preparation 9
Front mower unit 12
Preparing the front mower 13
Rear mowers 16
Adapter 20
Hitch 24
Hydraulic system 26
Universal drive shaft 36
Lighting 38
Hitching the machine 40
Pushed rear-mounted combination
Check list 41
Work preparation 42
Lighting 44
Universal drive shaft 47
Hydraulic system 49
Hitch 57
Adapter 59
Rear mowers 66
Front mower unit 69
Preparing the front mower 71
Hitching the machine 74
IMAGES PREVIEW OF THE MANUAL:

CLAAS DISCO 9400 C DUO CONVERSION TO FRONTREAR COMBINATION CONVERSION TO TOWED REAR COMBINATION CONVERSION INSTRUCTIONS MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.M