CLAAS DOMINATOR 150 DOMINATOR 140 DOMINATOR 130 Operator’s Manual – PDF DOWNLOAD

Description

CLAAS DOMINATOR 150 DOMINATOR 140 DOMINATOR 130 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS DOMINATOR 150 DOMINATOR 140 DOMINATOR 130 Operator’s Manual – PDF DOWNLOAD

INTRODUCTION

The present Operator’s Manual of the CLAAS combine harvesters

DOMINATOR 130
DOMINATOR 140
DOMINATOR 150

• is primarily intended for the machine operator and provides information about the use, setting and operation of the machine. Texts and pictures in this manual apply generally to all combines covered.
• Differences are indicated by picture legends or by notes in the text. Operation and maintenance of major ancillary equipment is also covered in this manual. Please read the instructions which apply to the appropriate ancillary equipment on your combine.
• Provided you follow the advice on the care and servicing of your machine, you will be rewarded with reliable and long service from your combine harvester.
• We recommend that you allow your authorized CLAAS dealer to carry out the regular maintenance. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time.
• Through correct operation and proper service, you can make full use of our sound experience and of the latest technical knowledge in combine harvesting with which your combine has been designed and thereby ensure the reliability of your combine harvester.

TABLE OF CONTENTS:

CLAAS DOMINATOR 150 DOMINATOR 140 DOMINATOR 130 Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 111
2 Contents
Contents 211
3 General Information
Road traffic regulations 311
Important note 321
Identification plate / serial number 331
Identification plate 332
Combine serial number 332
Engine serial number 332
Cutterbar identification plate 333
Combine-mounted straw chopper 333
Cab 333
4 Safety Rules
Safety rules 411
Safety lock 414
Fire extinguisher 414
Battery isolator switch 415
Straw guide apron 415
Wheel chock 415
Safety decals with pictorials 421
5 Specifications
CLAAS DOMINATOR 150 / 140 511
CLAAS DOMINATOR 130 521
Safety devices 531
Front attachments – weights, dimension 541
Sectional view of machine 551
Description and function 552
Cutterbar 552
Threshing mechanism 553
Straw walkers 553
Cleaning 553
Disawning 553
Considerations before combining 554
6 Prior to Operation
Perform the following steps prior to operation 611
Operator’s platform 621
Operator’s platform
(DOMINATOR 130) 621
Operator’s platform
(DOMINATOR 150 / 140) 622
Cab 623
Cab with fan 624
Cab with air conditioner
(with York compressor) 624
Cab with air conditioner
(with Sanden compressor) 626
Cab with fan and cab heater 628
Problem, possible cause and remedy – Air conditioner 629
Steering column 6211
Ignition switch 6211
Combined instrument gauge 6212
Adjusting the steering column 6212
Central terminal compartment 6212
Hydraulic control unit
(DOMINATOR 130 lift hydraulic system) 6213
Multifunction lever
(DOMINATOR 150 / 140) 6213
Switch console
(DOMINATOR 130) 6214
Engine speed rotary switch 6214
Function of warning lights 7 and 8
(DOMINATOR 130) 6215
Switch console
(DOMINATOR 150 / 140) 6216
Engine speed rotary switch
(DOMINATOR 150 / 140) 6216
Function of warning lights 15 and 18
(DOMINATOR 150 / 140) 6217
Control levers 6218
Grain tank unloading tube swing
(DOMINATOR 130) 6218
Grain tank unloading tube swing
(DOMINATOR 150 / 140) 6219
Operator’s seat
(standard version) 6220
Operator’s seat
(option) 6220
Platform ladder 6221
Front ladder 6221
Rear ladder 6221
Functions monitor 6222
Worklights 6223
Cab 6223
Sun roof 6224
Driving the Combine 631
Driving the combine
(DOMINATOR 130) 631
Starting the engine
(DOMINATOR 130) 631
Stopping the engine
(DOMINATOR 130) 631
Clutch and gear shift mechanism
(DOMINATOR 130) 632
Stopping
(DOMINATOR 130) 632
Driving the combine
(DOMINATOR 150 / 140) 633
Starting the engine
(DOMINATOR 150 / 140) 633
Stopping the engine
(DOMINATOR 150 / 140) 633
Adjusting the action of the ground speed control lever
(DOMINATOR 150 / 140) 634
Drive ranges
(DOMINATOR 150 / 140) 634
212 BA DOMINATOR 150 – 130 – 0293 2100
Contents
Stopping
(DOMINATOR 150 / 140) 635
Driving characteristics 635
Steering 635
Brakes 636
Foot brake 636
Handbrake 636
Adjustment of adjustable rear axles
(option) 637
Towing 637
7 Operation – Cutterbar
Attaching the cutterbar 711
Adjusting the stripper angle 711
Locking the cutterbar 711
Levelling the cutterbar 712
Connecting the universal drive shaft 712
Connecting the hydraulic hoses 713
Connecting the cable
(combine with electric reel speed adjustment) 713
Installing the reel speed adjustment Bowden cable
(combine with mechanical reel speed adjustment) 713
Installing the stands 714
Adjustments to the cutterbar 721
Crop dividers 721
Adjusting the crop dividers 721
Special crop dividers
(accessory) 722
Crop lifters 722
Transport bracket for crop lifters 723
Knives 723
Removing the knives 723
Installing the knives 723
Adjusting the height of the knives 724
Aligning the knife clips 724
Replacement knives 724
Cutterbar skids 724
Reel 725
Reel tines 725
Reel fore-and-aft adjustment
(mechanical) 726
Reel fore-and-aft adjustment
(hydraulic) 726
Reel variable-speed drive 727
Adjusting the reel speed 727
Intake auger 729
Adjusting the clearance from the bottom plate 729
Adjusting the position of the feeder fingers 729
Adjusting the stripper bars 729
Replacing the knife blades in the field 7210
8 Operation – Basic Machine
Feed rake conveyor 811
Cutterbar reverse drive 812
Cutterbar floatation springs 813
Floatation indicator gauge 814
Adjusting the cutting height indicator 814
Threshing mechanism 821
Stone trap 821
Engaging the threshing mechanism 822
Disengaging the threshing mechanism 822
Adjusting the concave 822
Concave settings 823
Threshing drum 824
Cleaning the threshing parts 825
Threshing drum speed 825
Threshing drum two-step variable-speed drive
(Chain drive) 826
Unslugging the threshing drum 827
Installing filler rasp bars – disawning 827
Combines with multi-crop concave 828
Impeller 8210
Deflector curtain 8210
Straw Walkers and Cleaning 831
Straw walkers 831
Intensive separation system 831
Cleaning the straw walkers 832
Straw walker risers 833
Warning signal 834
Preparation floor 834
Sieve pan 835
Cleaning fan 836
Adjusting the frogmouth sieves 837
Upper sieve 838
Lower sieve 838
Changing the lower sieve 838
Dynamic sidehill levelling
(3D cleaning system) 839
Returns 8310
Combine performance monitor 8310
Adjusting the sensor sensitivity 8312
Grain Delivery 841
Augers and auger troughs 841
Elevators 841
Grain tank 842
Grain tank unloading tube
(hydraulic slewing) 843
Swinging the grain tank unloading tube
(DOMINATOR 150 / 140) 843
Swinging the grain tank unloading tube
(DOMINATOR 130) 845
Engaging the grain tank unloading augers 845
Disengaging the grain tank unloading augers 846
Safety feature 846
Adjusting the unloading tube support 846
Cleaning flap on grain tank unloading tube 847
Grain tank unloading auger shear bolt 847
Grain tank full indicator 848
Straw Chopper 851
Before using the straw chopper for the first time,
check 851
Putting the straw chopper into operation 852
Adjusting the length of cut 853
Taking the straw chopper out of operation and
changing over to windrowing 854
Sieve changing with straw chopper installed 855
0293 2100 – BA DOMINATOR 150 – 130 213
Contents
Moving the straw chopper
to the forward position again 856
Using the straw chopper for maize 857
Adjusting the spreader hopper
for hitching the cutterbar trailer 857
Sieve and Threshing Tables 861
Sieve table 861
Thresing table 862
Problems, Possible cause and Remedy – Basic Machine 871
9 Maintenance – Basic Machine, Cutterbar
Important Maintenance Instructions 911
General maintenance instructions 911
Maintenance Schedules and Lubricants Charts 921
Maintenance Schedules 921
Lubricants charts 923
Hydraulic system / Ground drive 931
Hydraulic system
(DOMINATOR 150 / 140) 931
Checking the oil level 931
Changing the hydraulic oil 931
Changing the hydraulic oil filter 932
Filling instructions for changing the hydraulic oil 933
Adjusting the hydrostatic pump 933
Hydraulic system
(DOMINATOR 130) 934
Checking the oil level 934
Changing the hydraulic oil 934
Cleaning the screen insert element 935
Replacing the paper filter element 935
Bleeding the reel cylinders 936
Ground drive
(DOMINATOR 130) 936
Adjustment of ground drive clutch 936
Adjusting the short-circuit valve 937
Foot brakes / brake fluid 937
Gearboxes 941
Manual gearbox 941
Final drives
(DOMINATOR 150 / 140) 941
Final drives
(DOMINATOR 130) 942
Gearbox / knife drive 943
Adjusting the gear shift mechanism 943
Drive Belts and Drive Chains 951
Changing the variable-speed belt 951
Threshing drum variable-speed belt 951
Ground drive variable-speed belt
(DOMINATOR 130) 952
Fan variable-speed belt 953
Adjusting the ground drive
(DOMINATOR 130) 955
Adjusting the threshing mechanism drive 957
Adjusting the cutterbar drive 958
Adjusting the V-belt clutch
of the grain tank unloading auger 959
Sieve pan drive belt diagram 9510
Hydrostatic ground drive
(DOMINATOR 150 / 140) 9511
Tensioning the power band belt 9511
Straw walker drive 9512
Tensioning the auger drive belts 9512
Intensive separation system drive 9512
Cutterbar 9513
Tensioning the drive chain to the intermediate drive 9513
Reel drive 9513
Knife drive 9513
Tensioning the cutterbar drive belt 9514
Elevator Chains 961
Tensioning the clean grain elevator chain 961
Tensioning the returns elevator chain 961
Feed rake conveyor 971
Lubricating the feed rake conveyor mounting 971
Tensioning the feed rake conveyor chains 971
Cab / air conditioner 981
Cab 981
Cleaning the filters 981
Air conditioner 982
Precautions for protecting the air conditioner
during extended standstill periods
(DOMINATOR 130 – with York compressor) 983
Cleaning the evaporator 984
Cleaning the condenser 984
Checking the refrigerant level 985
Replacing the filter receiver drier 985
Required refrigerant charge – refrigerant R 134 a 985
Maintenance work before the harvest 986
Fire extinguisher 991
Have the stand-by-mode
of the fire extinguisher checked 991
Speeds 9101
Speed of the straw walker shaft 9101
Speed-loss monitor 9101
Straw Chopper 9111
Changing the free-swinging knives 9111
Adjusting the spring-loaded cylinder
on the intermediate drive
(up to serial no ) 9113
Adjusting the spring-loaded cylinder
on the intermediate drive
(from serial no ) 9113
Winter Storage Instructions for Combines 9121
10 Maintenance – Engine
Important Maintenance Instructions 1011
Important maintenance instructions and
safety precautions 1011
Maintenance Schedule and Lubricants ChartS 1021
Maintenance schedule 1021
Lubricants chart 1022
Maintenance – Engine 1031
Overview of engines 1031
Fuel system 1031
Fuel cock 1031
Water separator / fuel pre-filter
(Standard equipment – small version) 1032
Fuel filter 1032
Replacing the fuel filter cartridge 1033
214 BA DOMINATOR 150 – 130 – 0293 2100
Contents
Bleeding the fuel system 1033
Checking the engine oil level 1033
Engine oil change 1034
Changing the oil filter 1035
Filling in engine oil 1035
Cooling System 1041
Coolant 1041
Anti-freeze / corrosion protection 1041
Radiator 1042
Filling the cooling system with coolant 1042
Overpressure 1043
Tensioning the alternator / fan drive belts 1043
Rotary radiator screen 1043
Cleaning rotor 1043
Cleaning the radiator 1044
Dry-type Air Cleaner 1051
Warning device 1051
Cleaning the air cleaner intake screen 1051
Cleaning the air cleaner 1051
Removing the air cleaner main cartridge 1052
Safety filter cartridge 1053
Electric System 1061
Battery 1061
Alternator 1062
Engine Problems, Possible Cause and Remedy 1071
Engine Winter Storage 1081
Engine preservation 1081
11 Lubrication Schedule
Lubricants and instructions 1111
12 Index
Index 1211
IMAGES PREVIEW OF THE MANUAL:

CLAAS DOMINATOR 150 DOMINATOR 140 DOMINATOR 130 OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.M