Claas Dominator 58 58 S Dominator 48 Spezial Operator’s Manual – PDF DOWNLOAD

Description

Claas Dominator 58 58 S Dominator 48 Spezial Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Dominator 58 58 S Dominator 48 Spezial Operator’s Manual – PDF DOWNLOAD

INTRODUCTION :

This book is intended to give the machine driver information on setting, using and servicing the CLAAS range of DOMINATOR 58 S / SPEZIAL and DOMINATOR 48 S / SPEZIAL combines. Texts and pictures apply, in general, to all combine models covered by this book, and the information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text.

• Operation and maintenance of important ancillary equipment is also covered by this manual. Please read the instructions which apply to the appropriate ancillary equipment on your combine. Provided you follow the advice on the care and servicing of your machine you will be rewarded with reliable and long service from your Combine Harvester.
• We recommend that you allow your authorized CLAAS Dealer to carry out the regular maintenance. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time.
• By correct servicing and operation you can make full use of our sound experience and of the latest technical knowledge in Combine Harvesting with which your combine has been designed and thereby insure reliability of your Combine Harvester.

This Operator’s Manual can be ordered from your CLAAS Dealer as well as the manuals listed below:

• Threshing Instructions for special crops
• Fitting and Operating Instructions for ancillary equipment

TABLE OF CONTENTS:

Claas Dominator 58 58 S Dominator 48 Spezial Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 1 1 1
2 Contents
Contents 2 1 1
3 General information
Road Traffic Regulations 3 1 1
Important 3 2 1
Identification Plate / Serial Number 3 3 1
Identification plate 3 3 2
Combine serial number 3 3 2
Engine serial number 3 3 2
Engine serial number 3 3 3
Engine serial number 3 3 3
Cutterbar serial number 3 3 3
Straw chopper serial number 3 3 3
Cab serial number 3 3 4
4 Safety rules
Safety Rules 4 1 1
Safety lock 4 1 4
Fire extinguisher 4 1 4
Battery isolating switch 4 1 4
Wheel chock (Not for all countries) 4 1 5
Straw guide apron 4 1 5
Safety Decals With Pictorials 4 2 1
5 Specifications
CLAAS DOMINATOR 58 / 48 Spezial 5 1 1
Cutterbar 5 1 1
Threshing Equipment 5 1 1
Straw Walkers 5 1 1
Cleaning 5 1 2
Returns 5 1 2
Grain tank 5 1 2
Engines 5 1 2
Battery 5 1 2
Fuel tank 5 1 2
Ground drive 5 1 2
Ground speeds 5 1 2
Traction wheel drive 5 1 2
Steering 5 1 2
Tyre sizes and pressures 5 1 3
Brakes 5 1 3
Torque settings of wheel bolts 5 1 3
Weights 5 1 3
Combine dimensions 5 1 4
Wheel tread 5 1 4
Width over tyres 5 1 4
Wheel base 5 1 4
Ground clearance 5 1 4
Turning diameter conforming to DIN 70020 5 1 4
Transport position / working position 5 1 5
Safety features 5 1 6
Sectional View Of Combine 5 2 1
Description and function of the combine 5 2 2
Cutterbar 5 2 2
Threshing parts 5 2 3
Straw walkers 5 2 3
Cleaning 5 2 3
Disawning 5 2 3
Basic rules for combining 5 2 4
6 Prior to operation
Before Initial Operation 6 1 1
Driver’s Platform 6 2 1
Cab 6 2 2
Cab with ventilating system 6 2 3
Cab with ventilating system and air conditioner 6 2 3
Cab with ventilating system and heating 6 2 5
Problem, cause and / or remedy –
Compressor-type air conditioner 6 2 6
Steering column 6 2 7
Ignition switch (S) 6 2 7
Vehicle information unit 6 2 8
Adjusting the steering column 6 2 8
Central terminal compartment 6 2 8
Hydraulic control unit (lift hydraulic system) 6 2 9
Instrument panel 6 2 9
Control levers 6 2 10
Swinging the grain tank unloading tube 6 2 10
Cutterbar height indicator 6 2 11
Driver’s seat (standard version) 6 2 11
Driver’s seat (optional equipment) 6 2 12
Platform ladder 6 2 12
Front ladder 6 2 12
Rear ladder 6 2 12
Functions monitor 6 2 13
Work lights 6 2 13
Cab 6 2 14
Sun roof 6 2 14
Driving the Combine 6 3 1
Starting the engine 6 3 1
Transmission of power 6 3 2
Gear selection and clutch 6 3 2
Stopping the combine 6 3 3
Driving behaviour 6 3 3
Steering 6 3 3
Brakes 6 3 3
Foot brake 6 3 3
Handbrake 6 3 4
Stopping the engine 6 3 4
Towing 6 3 5
7 Operation – cutterbar
Attaching the Cutterbar 7 1 1
Levelling the cutterbar 7 1 3
Cutterbar clutch 7 1 4
Adjustment of cutterbar cylinders 7 1 5
Adjusting the cutterbar floatation springs 7 1 5
Contents
2 1 2 BA DOMINATOR 58 / 58 S / 48 Spezial – 298 367 0
Contents
Adjustments at the Cutterbar 7 2 1
Crop dividers 7 2 1
Outer deflector 7 2 1
Inner deflector 7 2 1
Special crop divider (extra equipment) 7 2 2
Grain lifters 7 2 2
Knife 7 2 2
Removing the knife 7 2 3
Installing the knife 7 2 3
Adjusting the knife keeps 7 2 3
Knife timing 7 2 4
Spare knife 7 2 4
Cutterbar skids 7 2 4
Reel 7 2 4
Adjusting the tension of the reel drive chain 7 2 5
Adjusting the spring-Ioaded cylinder 7 2 5
Mechanical fore and aft reel adjustment 7 2 5
Hydraulic fore and aft reel adjustment 7 2 6
Variable speed reel drive 7 2 7
Main table auger 7 2 8
Replacing knife sections in the field 7 2 9
Cutterbar trailer 7 2 9
8 Operation – basic machine
Feeder Housing 8 1 1
Cutterbar reverse drive 8 1 1
Treshing Mechanism 8 2 1
Stone trap 8 2 1
Engaging the threshing mechanism 8 2 1
Disengaging the threshing mechanism 8 2 2
Concave adjustment 8 2 2
Threshing drum 8 2 3
Cleaning the threshing parts 8 2 3
Drum variable speed pulleys 8 2 4
Slow speed threshing drum drive kit (Chain drive) 8 2 4
Unslugging the threshing drum 8 2 5
Disawning 8 2 5
Filler rasp bars 8 2 6
Impeller 8 2 6
Deflector curtain 8 2 7
Straw Walkers and Cleaning 8 3 1
Straw walkers 8 3 1
Intensive separation system 8 3 1
Straw walker risers 8 3 2
Cleaning the straw walkers 8 3 3
Audible warning signal 8 3 3
Preparation floor 8 3 4
Pulling out the preparation floor 8 3 4
Sieve pan 8 3 5
Cleaning fan 8 3 5
Fan shutters for combining grass seed and
other special crops 8 3 6
Adjusting the frogmouth sieves 8 3 7
Lower sieve 8 3 7
Changing the lower sieve 8 3 7
Dynamic sidehill levelling (3-D cleaning system) 8 3 8
Returns 8 3 9
Combine performance monitor 8 3 9
Adjusting the sensor sensitivity (Sieve pan sensor) 8 3 11
Adjusting the sensor sensitivity (Straw walker sensor) 8 3 11
Grain Delivery 8 4 1
Augers and auger troughs 8 4 1
Elevators 8 4 1
Grain tank 8 4 2
Unloading the tank 8 4 2
Hydraulic swing of grain tank unloading tube 8 4 3
Swinging the grain tank unloading tube in or out 8 4 3
Engaging the grain tank unloading augers 8 4 3
Disengaging the grain tank unloading augers 8 4 3
Safety feature 8 4 4
Safety feature adjustment 8 4 4
Clean-out door on grain tank discharge tube 8 4 5
Shear bolt – grain tank unloading system 8 4 5
Straw Chopper 8 5 1
Before using the straw chopper, check 8 5 1
Putting the straw chopper into operation 8 5 2
Adjusting the length of cut 8 5 3
Putting the straw chopper out of operation and changing over to
windrowing straw 8 5 4
Changing the sieve while straw chopper is fitted 8 5 5
Moving the chopper back to front position 8 5 6
Deactivating the speed-loss monitor 8 5 6
Hitching the cutterbar trailer 8 5 6
Sieve and Threshing Chart 8 6 1
Sieve chart 8 6 1
Threshing chart 8 6 2
Problem, Cause and / or Remedy – Basic Machine 8 7 1
Threshing equipment 8 7 3
Straw walkers 8 7 4
Cleaning 8 7 5
Dynamic sidehill levelling 3-D cleaning unit 8 7 5
Returns 8 7 6
Elevators 8 7 6
Grain tank 8 7 6
9 Maintenance – basic machine, cutterbar
Important Maintenance Instructions 9 1 1
Maintenance Schedules and Lubricants Charts 9 2 1
Maintenance Schedules 9 2 1
Lubricants Chart 9 2 3
Hydraulic System / Chassis 9 3 1
Lift hydraulic system 9 3 1
Tensioning the pump drive V-belt 9 3 1
Checking the oil level 9 3 1
Changing the hydraulic oil 9 3 1
Cleaning the screen filter 9 3 2
Replacing the paper filter cartridge 9 3 2
Bleeding the reel cylinders 9 3 3
Adjusting the ground drive clutch 9 3 3
Setting the bypass valve 9 3 4
Footbrakes / brake fluid 9 3 4
Transmissions 9 4 1
Change-speed transmission 9 4 1
Final drives 9 4 1
Adjusting the gear shift control 9 4 1
Drive Belts and Chains 9 5 1
Changing the variable speed belts 9 5 1
Threshing drum variable speed belt 9 5 1
298 367 0 – BA DOMINATOR 58 / 58 S / 48 Spezial 2 1 3
Contents
Ground drive belt 9 5 2
Fan variable speed belt 9 5 3
Adjusting the ground drive belt 9 5 5
Adjusting the threshing mechanism drive 9 5 7
Adjusting the cutterbar drive 9 5 8
Adjusting the V-belt clutch of unloading auger drive 9 5 9
Diagram of sieve pan drive belt 9 5 10
Straw walker drive 9 5 11
Tensioning the auger drive belt 9 5 11
Intensive separation system drive 9 5 11
Elevator Chains 9 6 1
Adjusting the tension of elevator chains 9 6 1
Clean grain elevator 9 6 1
Returns elevator 9 6 1
Feeder Housing 9 7 1
Greasing the feeder housing coupling forks 9 7 1
Tensioning the feed rake feeder chains 9 7 1
Cab / Compressor-type Air
Conditioner 9 8 1
Cab 9 8 1
Cleaning the filters 9 8 1
Compressor-type air conditioner 9 8 1
Tensioning the compressor drive V-belt 9 8 1
Compressor-type air conditioner system
preventive maintenance during prolonged shut-down 9 8 2
Cleaning the evaporator 9 8 2
Cleaning the condenser 9 8 3
Checking the refrigerant level 9 8 3
Replacing the filter receiver drier 9 8 4
Required quantity of refrigerant R 134 a 9 8 4
Maintenance work before the harvest 9 8 5
Fire extinguisher 9 8 5
Speeds 9 9 1
Speed of straw walker crankshaft 9 9 1
Functions monitor 9 9 1
Straw Chopper 9 10 1
Changing the free-swinging knive 9 10 1
Adjusting the spring-loaded cylinder at the
intermediate drive 9 10 2
Winter Storage Instructions for Combines 9 11 1
10 Maintenance – Engine
Important Maintenance Instructions 10 1 1
Maintenance Schedule and Lubricants Chart 10 2 1
Maintenance chart 10 2 1
Lubricants chart 10 2 2
Maintenance – Engine 10 3 1
Engine overview 10 3 1
Fuel system 10 3 2
Fuel tank 10 3 2
Fuel pre-filter 10 3 3
Water separator / fuel pre-filter
(extra equipment – replaces fuel pre-filter) 10 3 3
Fuel filter 10 3 4
Bleeding the fuel system 10 3 5
Checking the engine oil level 10 3 5
Engine oil change 10 3 5
Draining oil 10 3 6
Oil filter 10 3 6
Filling in engine oil 10 3 7
Tensioning the V-belts 10 3 7
Tensioning the alternator / fan drive belt 10 3 7
Cooling System 10 4 1
Water drain plugs on the engine block 10 4 1
Water drain plugs on the engine block 10 4 2
Radiator 10 4 2
Coolant 10 4 3
Filling the cooling system with coolant 10 4 3
Overpressure 10 4 3
Coolant temperature 10 4 4
Warning signal 10 4 4
Radiator chaff screen 10 4 4
Cleaning rotor 10 4 4
Cleaning the radiator 10 4 5
Dry-type Air Cleaner 10 5 1
Warning device 10 5 1
Cleaning the air cleaner intake screen 10 5 1
Cleaning the air cleaner 10 5 1
Cleaning the dry-type air cleaner 10 5 2
Removing the main filter cartridge 10 5 2
Installing the main filter cartridge 10 5 3
Safety cartridge 10 5 3
Electrical System 10 6 1
Battery 10 6 1
Alternator 10 6 2
Engine Problems, Cause and / or Remedy 10 7 1
Engine Winter Storage 10 8 1
Engine preservation 10 8 1
Operating the engine again 10 8 1
11 Lubrication chart
12 Index
Index 12 1 1

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V