CLAAS Forage Harvester ORBIS 900 750 600 Feed rake conveyor retrofit kit Fitting instructions Manual_DE_GB_FR_ES_IT_RU

Description

CLAAS Forage Harvester ORBIS 900 750 600 Feed rake conveyor retrofit kit Fitting instructions Manual_DE_GB_FR_ES_IT_RU

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

CLAAS Forage Harvester ORBIS 900 750 600 Feed rake conveyor retrofit kit Fitting instructions Manual_DE_GB_FR_ES_IT_RU

General instructions
Safety precautions

Work may be carried out only by specialist
workshops authorised by CLAAS and having
qualified personnel.
The general safety, accident prevention and environmental
protection regulation must be observed.
Read and observe the Safety chapter in the Operator’s
manual.
Carry out work under the raised machine/front attachment
or raised components only when a safe support
is provided.
Before carrying out work on the hydraulic system,
lower machine/front attachment and hydraulically
actuated components to the ground. Depressurise
the system.
All work must be carried out with the drive disengaged
and the engine stopped! – Remove the
ignition key!
Relieve the tension of pre-loaded energy accumulators
(springs, accumulators, hydraulic cylinders) and
of components which are pre-loaded by energy accumulators
properly prior to starting installation work!
Check the tight seat of all bolts after assembly.
Carry out a function test

FILE DETAILS:

CLAAS Forage Harvester ORBIS 900 750 600 Feed rake conveyor retrofit kit Fitting instructions Manual_DE_GB_FR_ES_IT_RU

Language : _DE_GB_FR_ES_IT_RU
Pages :24
Downloadable : Yes
File Type : PDF
Size:3.67 MB

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M