CLAAS Forage Harvesters RU 600 CONTOUR 600 AUTO-CONTOUR 600 XTRA TYP 661 Assembly and Operator’s Manual

Description

CLAAS Forage Harvesters RU 600 CONTOUR 600 AUTO-CONTOUR 600 XTRA TYP 661 Assembly and Operator’s Manual – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

CLAAS Forage Harvesters RU 600 CONTOUR 600 AUTO-CONTOUR 600 XTRA TYP 661 Assembly and Operator’s Manual – PDF DOWNLOAD

INTRODUCTION
This operator’s manual provides information on how to
use, adjust and service the CLAAS maize header.
Note that in the following chapter, the CLAAS maize
header is also called attachment/machine.
Follow the advice on correct maintenance and servicing
in order to ensure maximum performance and a
long service life of your machine.
Also have the assembly of your machine and regular
inspections carried out by your specialist workshop.
Failure to carry out maintenance work, or incorrect
operation will result in poor machine efficiency and
loss of valuable time.
By ensuring correct operation, and carrying out maintenance
and service work with care, you will be able to
make full use of the state-of-the-art technology and the
experience with which your maize header has been
designed

TABLE OF CONTENTS:

CLAAS Forage Harvesters RU 600 CONTOUR 600 AUTO-CONTOUR 600 XTRA TYP 661 Assembly and Operator’s Manual – PDF DOWNLOAD

1 Machine overview 4
2 Introduction 5
Introduction 5
Validity 5
3 Table of contents 6
4 Preface 8
Of special importance 8
Identification plate 9
Transport on public roads 10
Protective equipment for road transport 10
Driving lights during road transport 11
Additional weights 11
5 Safety instructions 12
Identification of warnings and dangers 12
Designated use 12
General safety and accident prevention instructions 12
Safety decals with pictorials 14
Safety prop 17
6 Specifications 18
RU 600 Contour 18
RU 600 Auto-Contour 18
RU 600 Xtra 18
7 Before operation 19
Loading and unloading the maize header 19
Mounting the maize header for the first time 20
Adjustments to the forager 21
Additional weights 21
Required additional weights 21
Order numbers – additional weights 21
Additional lighting for road transport 22
Installing the restrictor on the forager 22
JAGUAR 880, 860, 840, 820 23
JAGUAR 900, 890, 870, 850, 830 23
Adjusting the drop rate 24
JAGUAR 900 / 890 / 870 / 850 / 830 24
JAGUAR 880 / 860 / 840 / 820 24
Basic setting: 24
Mounting the safety covers 25
Assembly of maize header 26
Mount locking mechanism rods 26
Installing down-crop augers 27
Assembly of crop dividers/divider points 28
Installing crop dividers 28
Installing divider point (RU 600 with 4 divider points) 31
Assembly of crop divider (D) for Autopilot (RU 600 with 4 divider points) 32
Installing divider points (RU 600 with 3 divider points) 33
Assembly of crop divider (D) for Autopilot (RU 600 with 3 divider points) 33
Adjusting the crop dividers 34
Attaching the push bar 35
Removing the protective strip 35
Removing the transport frame 36
Check and observe the following before putting into operation 37
Mounting the maize header 38
To mount the maize header proceed as follows: 38
Unlocking 39
Attaching the maize header 39
Locking 40
Adjusting the locking mechanism 40
Adjusting the locking rods 41
Connecting the hydraulics 42
Connecting the power supply 42
Installing the universal drive shaft 43
Pivoting frame 44
Unlocking the swing stop 44
Locking the swing stop 44
Prop stands 44
Work and transport position 45
Transport position 45
Working position 45
Unhitching/setting down the maize header 46
8 Operation 48
Use 48
Raising and lowering the maize header 48
JAGUAR 900 / 890 / 870 / 850 / 830 48
JAGUAR 880 / 860 / 840 / 820 49
Raise and lower side arms of the maize header 49
JAGUAR 900 / 890 / 870 / 850 / 830 49
JAGUAR 880 / 860 / 840 / 820 49
Using the maize header 50
Crop dividers 51
Adjusting the angle of the crop dividers 51
Adjusting the outer crop dividers 52
Adjusting the deflector plates (up to serial No: 661 0 1804) 52
Adjusting the push bar 53
Speed adjustment 53
Changing the sprocket 55
Adjusting serrated strips 55
Adjusting the knives 55
Adjusting the hitch 56
Harvesting down-crop 57
Optional equipment 58
15-tooth sprocket 58
Down-crop cone (D03 0070) 58
CLAAS Auto-Contour (R03 0070) 58
CLAAS Contour Plus (R03 0060) 58
CLAAS Autopilot (R03 0080 / R03 0110) 59
Adjusting the sensors: 59
Deflector bar height increase (D03 0060) 60
9 Maintenance 61
Important maintenance instructions 61
Hydraulic system 61
Bolts 61
Lubrication 61
Guards 61
Drive systems 62
Gearboxes 62
Main drive (B) 63
Bevel gear drive (D) 63
Angle drive (E) 64
Rotor drive (F) 64
Clearing drive (G) 65
Gearboxes (H, I) for down maize augers 65
Clutches 66
Universal drive shafts 67
General information on universal drive shafts 68
Chains 68
Lubricating the drive chain 68
Tensioning the drive chain 69
Knives 69
Replacing knives 69
Changing the knives: 70
Spring adjustment 70
Intake auger spring tension 70
Spring tension of folding frame 71
Hydraulic system 71
Hydraulic hose connections 71
Fixing elements 72
Screw connections 72
Joining elements 72
End of season storage 72
Lubricants chart 73
10 Lubrication chart 74
Safety instructions 74
Lubricants 74
Lubrication 74

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M