Claas HS-2 Wood Cutter Operation Manual PDF Download

Description

Claas HS-2 wood cutter Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas HS-2 wood cutter Operator’s Manual – PDF DOWNLOAD

2 Introduction
2.1 General Information
2.1.1 How to use this manual

• This operator’s manual provides information on how to use, adjust and operate the CLAAS wood cutter. Please note that, in the chapters that follow, the CLAAS wood cutter is also referred to as the front attachment.
• The required forage harvester is subsequently referred to as the machine. Technical specifications, dimensions, and weights include the usual tolerances. Front, rear, right and left always relate to the direction of travel. Provided you follow our advice on care and maintenance, you will be rewarded with reliable and long service from the front attachment.
• Please have your authorised CLAAS dealer carry out the fitting and regular inspection of the front attachment. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time. Your wood cutter is the product of considerable experience and knowledge.
• It will always give you excellent service if you take advantage of this experience and knowledge by operating and caring for it correctly.

TABLE OF CONTENTS:

Claas HS-2 wood cutter Operator’s Manual – PDF DOWNLOAD

Contents
1 Machinery overview
11 HS-2 wood cutter 9
111 Key to diagram 9
112 Structure and function 10
2 Introduction
21 General Information 11
211 How to use this manual 11
22 Front attachment identification tags 12
221 Validity 12
222 Identification plate 12
3 Safety
31 Please note 13
311 Work safety 13
32 Safety precautions 14
321 Identification of warning and danger signs 14
322 Intended use 14
323 General safety and accident prevention regulations 15
33 Warning signs 17
331 Please note 17
332 Placement on the machine 18
34 Safety features 23
341 Stands 23
4 Specifications
41 HS-2 wood cutter 24
411 Dimensions 24
42 Timber 25
421 Dimensions 25
5 Before commissioning
51 Forage harvester 26
511 Tyres 26
512 Safety frame for headlights 26
513 Underbody guard 26
514 Chopping wood without the corn cracker 26
515 CLAAS Auto-Contour / contour system / pre-set cutting height 27
516 Adjusting the front attachment drop rate – Jaguar 900 / 890 / 870 / 850 / 830 28
517 Adjusting the front attachment drop rate – Jaguar 880 / 860 / 840 / 820 29
518 Additional hydraulic drive for HS-2 30
519 Additional hydraulic drive for pickup 31
5110 Additional hydraulic drive for maize header 32
5111 Removing the front wheel 32
5112 Fitting the front wheel 33
5113 Unscrewing the wheel casing 33
5114 Screwing on the wheel casing 33
6 00 0291 310 0 – BA HS-2 – 03/05
Contents
82021
5115 Removing the saw blade drive hydraulic pump V-belt pulley
(with wedge fastening) 34
5116 Fitting the saw blade drive hydraulic pump V-belt pulley
(with wedge fastening) 34
5117 Removing the saw blade drive hydraulic pump V-belt pulley
(with belleville washer) 35
5118 Fitting the saw blade drive hydraulic pump V-belt pulley
(with belleville washer) 36
5119 Removing the corn cracker drive V-belt pulley
(with wedge fastening) 37
5120 Fitting the corn cracker drive V-belt pulley
(with wedge fastening) 37
5121 Removing the corn cracker drive V-belt pulley
(with belleville washer) 38
5122 Fitting the corn cracker drive V-belt pulley
(with belleville washer) 39
5123 Removing the saw blade hydraulic pump 40
5124 Fitting the saw blade hydraulic pump 46
6 Before putting the machine into operation
61 Tasks to be performed 54
7 Fitting and removing the front attachment
71 Installing the front attachment 55
711 Unscrewing clamping pieces 55
712 Attaching the front attachment 55
713 Adjusting the bearing pieces 56
714 Securing the front attachment 57
715 Coupling the hydraulic lines 57
716 Fitting the universal drive shaft 58
72 Removing the front attachment 61
721 Removing the universal drive shaft 61
722 Decoupling the hydraulic lines 62
723 Unscrewing clamping pieces 64
724 Unhitching the wood cutter 64
8 Driving and transport
81 Road traffic 65
811 Regulations 65
812 Adjusting the height of the attachment 66
813 Adjusting the push bar 66
814 Adjusting the push bar extensions 66
815 Adjusting the outer deflectors 67
816 Fitting the safety bar 67
9 Field use
91 Using the wood cutter 68
911 Removing the safety bar for field use 68
912 Adjusting the width of the outer deflectors 68
00 0291 310 0 – BA HS-2 – 03/05 7
Contents
82021
913 Adjusting the height of the outer deflectors 69
914 Adjusting the push bar 70
915 Adjusting the push bar extensions 71
916 Adjusting the infeed plate 72
917 Cutting height 73
918 Adjusting the centre skid 73
919 Switching the feed auger off / on 74
9110 Adjusting the speed of the feed auger 74
9111 Observing the saw blade oil pressure 75
10 Operation
101 Multifunction lever / switch console 76
1011 Raising/lowering the front attachment 76
1012 Raising/lowering the push bar 76
1013 Switching on the front attachment 77
11 Troubleshooting
111 Troubleshooting 79
1111 Troubleshooting 79
12 Maintenance
121 Maintenance instructions 80
1211 Spare parts 80
1212 Screws/bolts 80
1213 Hydraulic system 81
1214 Lubrication 82
1215 Safety devices 82
122 Maintenance schedule 83
1221 Maintenance schedule 83
123 Lubricants 84
1231 Lubricants chart 84
124 Gearbox 85
1241 Feed gear 86
1242 Universal drive shaft 87
125 Belts / chains 88
1251 Removing the feed auger hydraulic pump belt (1) 88
1252 Fitting the feed auger hydraulic pump belt (1) 88
1253 Removing the saw blade hydraulic pump belt (2) 89
1254 Fitting the saw blade hydraulic pump belt (2) 90
1255 Removing the chain (3) 91
1256 Fitting the chain (3) 91
1257 Removing the chain (4) 92
1258 Fitting the chain (4) 93
1259 Removing the corn cracker belt (11) 94
12510Fitting the corn cracker belt (11) 95
126 Knives / saw blades 96
1261 Replacing the saw blades 96
1262 Adjust knives / shear bar 97
8 00 0291 310 0 – BA HS-2 – 03/05
Contents
82021
127 Hydraulic system 99
1271 Replace hydraulic oil filter 99
1272 Hydraulic hose lines 100
128 Fastening elements 101
1281 Bolted joints 101
1282 Fasteners 101
129 Winter storage 102
1291 Suggestions for winter storage 102
13 Lubrication chart
131 Lubrication points 103
1311 Lubrication table 103
1312 Lubrication points – 10h 104
1313 Lubrication points – 50h 105
1314 Lubrication points – 100h 106
1315 Lubrication points – 250h 107

IMAGES PREVIEW OF THE MANUAL:

CLAAS HS-2 WOOD CUTTER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M