Claas HS-2 Wood Cutter Operator’s Manual – PDF DOWNLOAD

Description

Claas HS-2 Wood Cutter Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas HS-2 Wood Cutter Operator’s Manual – PDF DOWNLOAD

How to use this manual :

This operator’s manual provides information on how to use, adjust and operate the CLAAS wood cutter. Please note that, in the chapters that follow, the CLAAS wood cutter is also referred to as the front attachment. The required forage harvester is subsequently referred to as the machine.

• Technical specifications, dimensions, and weights include the usual tolerances. Front, rear, right and left always relate to the direction of travel. Provided you follow our advice on care and maintenance, you will be rewarded with reliable and long service from the front attachment.
• Please have your authorised CLAAS dealer carry out the fitting and regular inspection of the front attachment. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time.
• Your wood cutter is the product of considerable experience and knowledge. It will always give you excellent service if you take advantage of this experience and knowledge by operating and caring for it correctly.

TABLE OF CONTENTS:

Claas HS-2 Wood Cutter Operator’s Manual – PDF DOWNLOAD

1 Machinery overview
1 1 HS-2 wood cutter 9
1 1 1 Key to diagram 9
1 1 2 Structure and function 10
2 Introduction
2 1 General Information 11
2 1 1 How to use this manual 11
2 2 Front attachment identification tags 12
2 2 1 Validity 12
2 2 2 Identification plate 12
3 Safety
3 1 Please note 13
3 1 1 Work safety 13
3 2 Safety precautions 14
3 2 1 Identification of warning and danger signs 14
3 2 2 Intended use 14
3 2 3 General safety and accident prevention regulations 15
3 3 Warning signs 17
3 3 1 Please note 17
3 3 2 Placement on the machine 18
3 4 Safety features 23
3 4 1 Stands 23
4 Specifications
4 1 HS-2 wood cutter 24
4 1 1 Dimensions 24
4 2 Timber 25
4 2 1 Dimensions 25
5 Before commissioning
5 1 Forage harvester 26
5 1 1 Tyres 26
5 1 2 Safety frame for headlights 26
5 1 3 Underbody guard 26
5 1 4 Chopping wood without the corn cracker 26
5 1 5 CLAAS Auto-Contour / contour system / pre-set cutting height 27
5 1 6 Adjusting the front attachment drop rate – Jaguar 900 / 890 / 870 / 850 / 830 28
5 1 7 Adjusting the front attachment drop rate – Jaguar 880 / 860 / 840 / 820 29
5 1 8 Additional hydraulic drive for HS-2 30
5 1 9 Additional hydraulic drive for pickup 31
5 1 10 Additional hydraulic drive for maize header 32
5 1 11 Removing the front wheel 32
5 1 12 Fitting the front wheel 33
5 1 13 Unscrewing the wheel casing 33
5 1 14 Screwing on the wheel casing 33
6 00 0291 310 0 – BA HS-2 – 03/05
Contents
82021
5 1 15 Removing the saw blade drive hydraulic pump V-belt pulley
(with wedge fastening) 34
5 1 16 Fitting the saw blade drive hydraulic pump V-belt pulley
(with wedge fastening) 34
5 1 17 Removing the saw blade drive hydraulic pump V-belt pulley
(with belleville washer) 35
5 1 18 Fitting the saw blade drive hydraulic pump V-belt pulley
(with belleville washer) 36
5 1 19 Removing the corn cracker drive V-belt pulley
(with wedge fastening) 37
5 1 20 Fitting the corn cracker drive V-belt pulley
(with wedge fastening) 37
5 1 21 Removing the corn cracker drive V-belt pulley
(with belleville washer) 38
5 1 22 Fitting the corn cracker drive V-belt pulley
(with belleville washer) 39
5 1 23 Removing the saw blade hydraulic pump 40
5 1 24 Fitting the saw blade hydraulic pump 46
6 Before putting the machine into operation
6 1 Tasks to be performed 54
7 Fitting and removing the front attachment
7 1 Installing the front attachment 55
7 1 1 Unscrewing clamping pieces 55
7 1 2 Attaching the front attachment 55
7 1 3 Adjusting the bearing pieces 56
7 1 4 Securing the front attachment 57
7 1 5 Coupling the hydraulic lines 57
7 1 6 Fitting the universal drive shaft 58
7 2 Removing the front attachment 61
7 2 1 Removing the universal drive shaft 61
7 2 2 Decoupling the hydraulic lines 62
7 2 3 Unscrewing clamping pieces 64
7 2 4 Unhitching the wood cutter 64
8 Driving and transport
8 1 Road traffic 65
8 1 1 Regulations 65
8 1 2 Adjusting the height of the attachment 66
8 1 3 Adjusting the push bar 66
8 1 4 Adjusting the push bar extensions 66
8 1 5 Adjusting the outer deflectors 67
8 1 6 Fitting the safety bar 67
9 Field use
9 1 Using the wood cutter 68
9 1 1 Removing the safety bar for field use 68
9 1 2 Adjusting the width of the outer deflectors 68
00 0291 310 0 – BA HS-2 – 03/05 7
Contents
82021
9 1 3 Adjusting the height of the outer deflectors 69
9 1 4 Adjusting the push bar 70
9 1 5 Adjusting the push bar extensions 71
9 1 6 Adjusting the infeed plate 72
9 1 7 Cutting height 73
9 1 8 Adjusting the centre skid 73
9 1 9 Switching the feed auger off / on 74
9 1 10 Adjusting the speed of the feed auger 74
9 1 11 Observing the saw blade oil pressure 75
10 Operation
10 1 Multifunction lever / switch console 76
10 1 1 Raising/lowering the front attachment 76
10 1 2 Raising/lowering the push bar 76
10 1 3 Switching on the front attachment 77
11 Troubleshooting
11 1 Troubleshooting 79
11 1 1 Troubleshooting 79
12 Maintenance
12 1 Maintenance instructions 80
12 1 1 Spare parts 80
12 1 2 Screws/bolts 80
12 1 3 Hydraulic system 81
12 1 4 Lubrication 82
12 1 5 Safety devices 82
12 2 Maintenance schedule 83
12 2 1 Maintenance schedule 83
12 3 Lubricants 84
12 3 1 Lubricants chart 84
12 4 Gearbox 85
12 4 1 Feed gear 86
12 4 2 Universal drive shaft 87
12 5 Belts / chains 88
12 5 1 Removing the feed auger hydraulic pump belt (1) 88
12 5 2 Fitting the feed auger hydraulic pump belt (1) 88
12 5 3 Removing the saw blade hydraulic pump belt (2) 89
12 5 4 Fitting the saw blade hydraulic pump belt (2) 90
12 5 5 Removing the chain (3) 91
12 5 6 Fitting the chain (3) 91
12 5 7 Removing the chain (4) 92
12 5 8 Fitting the chain (4) 93
12 5 9 Removing the corn cracker belt (11) 94
12 5 10Fitting the corn cracker belt (11) 95
12 6 Knives / saw blades 96
12 6 1 Replacing the saw blades 96
12 6 2 Adjust knives / shear bar 97
8 00 0291 310 0 – BA HS-2 – 03/05
Contents
82021
12 7 Hydraulic system 99
12 7 1 Replace hydraulic oil filter 99
12 7 2 Hydraulic hose lines 100
12 8 Fastening elements 101
12 8 1 Bolted joints 101
12 8 2 Fasteners 101
12 9 Winter storage 102
12 9 1 Suggestions for winter storage 102
13 Lubrication chart
13 1 Lubrication points 103
13 1 1 Lubrication table 103
13 1 2 Lubrication points – 10h 104
13 1 3 Lubrication points – 50h 105
13 1 4 Lubrication points – 100h 106
13 1 5 Lubrication points – 250h 107

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V