CLAAS JAGUAR 900 – 830 Profistar JAGUAR 900 – 830 Speedstar Type 493 Operator’s Manual – PDF DOWNLOAD

Description

CLAAS JAGUAR 900 – 830 Profistar JAGUAR 900 – 830 Speedstar Type 493 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS JAGUAR 900 – 830 Profistar JAGUAR 900 – 830 Speedstar Type 493 Operator’s Manual – PDF DOWNLOAD

The present Operator’s Manual is primarily intended for the machine operator and contains information on using, setting and operating the machine. In general, texts and pictures apply to all machine models covered by this manual. Changes have been pointed out by captions and text notes.

• The chapters are subdivided into the respective subassemblies of the machine. Provided all instructions regarding maintenance and care of your machine are followed, you can count on many years of reliable service. Please have your authorised CLAAS dealer carry out the recommended regular inspections.
• The neglecting of regular maintenance and proper machine operation lead to reduced performance and loss of time. If proper operation and careful maintenance is ensured, your machine which incorporates many years of experience and the latest harvesting equipment technology will render you excellent service. Front attachments and trailed implements come with a separate Operator’s Manual.

TABLE OF CONTENTS:

CLAAS JAGUAR 900 – 830 Profistar JAGUAR 900 – 830 Speedstar Type 493 Operator’s Manual – PDF DOWNLOAD

1 Introduction
1 1 General Information 16
1 1 1 How to use this manual 16
1 1 2 Validity of instructions 17
1 1 3 Specifications 17
1 1 4 Road traffic regulations 17
1 1 5 Notes on the metal detection system 20
1 2 Identification plates and identification numbers 21
1 2 1 Spare parts and technical questions 21
1 2 2 Machine identification plate 21
1 2 3 Chopper unit identification plate 23
1 2 4 Daimler Chrysler OM 502 LA engine identification plate 23
1 2 5 Daimler Chrysler OM 460 LA engine identification plate 24
1 2 6 Rear drive axle identification plate 24
2 Sectional view of machine
2 1 JAGUAR 900-830 Profistar / Speedstar 25
2 1 1 Overview of machine front and left side 25
2 1 2 Overview of machine rear and right side 26
3 Safety precautions
3 1 General Information 27
3 1 1 Operational safety 27
3 1 2 Intended use 27
3 1 3 Safety and accident prevention regulations 28
3 1 4 Prior to operation 28
3 1 5 Additional weights 29
3 1 6 Transporting passengers 29
3 1 7 General driving operations 29
3 1 8 Forage harvester driving operations 30
3 1 9 Driving operations on slopes 30
3 1 10 Leaving the machine 30
3 1 11 Front attachments and trailers 30
3 1 12 Forage harvester chopping unit 31
3 1 13 Air conditioner 31
3 1 14 Adjustment and maintenance work 32
3 1 15 Accumulator 32
3 1 16 Antifreeze 33
3 1 17 Forage harvester sound pressure level 33
3 1 18 First aid measures 33
3 1 19 Wheel chocks 34
3 1 20 Fire extinguisher 34
3 1 21 Battery isolating switch 35
3 1 22 Danger of injury due to escaping hydraulic liquid 35
3 1 23 Compressed-air brake system testing instructions 36
3 2 Safety rules 38
3 2 1 Identification of warning and danger signs 38
6 000 293 899 0 – BA JAGUAR 900-830 – 03/06
2833
3 3 Safety decals 39
3 3 1 General information on safety decals 39
3 3 2 Operator’s platform 40
3 3 3 Feeder 43
3 3 4 Machine components 45
3 3 5 Hydraulic system 46
3 3 6 Engine 47
3 3 7 Discharge 47
4 Specifications
4 1 JAGUAR 900 / 890 / 870 / 850 / 830 Speedstar – TYPE 493 49
4 1 1 General information 49
4 1 2 Dimensions 49
4 1 3 Weights 51
4 1 4 Electrical system 52
4 1 5 Feeder 52
4 1 6 Chassis 52
4 1 7 Engine 53
4 1 8 Chopping 54
4 1 9 Discharge 55
4 1 10 Central lubrication system 55
4 2 JAGUAR 900 / 890 / 870 / 850 / 830 Profistar – TYPE 493 56
4 2 1 General information 56
4 2 2 Dimensions 56
4 2 3 Weights 58
4 2 4 Electrical system 59
4 2 5 Feeder 59
4 2 6 Chassis 59
4 2 7 Engine 60
4 2 8 Chopping 61
4 2 9 Discharge 62
4 2 10 Central lubrication system 62
5 Before initial operation
5 1 General Information 63
5 1 1 Check list for initial operation 63
5 2 Driver’s console 65
5 2 1 Installing the headlights 65
5 2 2 Adjusting the headlights 65
5 2 3 Installing the work lights 66
5 2 4 Installing the outside mirror 66
5 2 5 Installing the side view mirror (accessory) 67
5 2 6 Installing the warning beacons 67
5 2 7 Connecting the side window windscreen washer 67
5 3 Feeder 68
5 3 1 Removing the transport safety screw 68
5 4 Machine components 69
5 4 1 Removing the cover plate on machine top 69
000 293 899 0 – BA JAGUAR 900-830 – 03/06 7
2833
5 5 Discharge 70
5 5 1 Converting the upper discharge chute from transport to working position 70
5 6 Central lubrication system 72
5 6 1 Filling the lubricant reservoir of central lubrication system 72
6 Prior to any commissioning
6 1 General Information 74
6 1 1 Check list for daily commissioning 74
6 2 Operator’s platform 76
6 2 1 Adjusting the side view mirror (accessory) 76
6 3 Chassis 77
6 3 1 Rear axle overview 77
6 3 2 Adjusting the rear axle (000 769 250 0) track width 78
6 4 Machine components 80
6 4 1 Additional weights 80
6 4 2 Additional equipment from other suppliers 80
6 4 3 Silage additive 80
7 Overview of controls
7 1 Driver’s console 82
7 1 1 Operator’s platform overview 82
7 1 2 Switch console 83
7 1 3 Overview of monitors 85
7 1 4 Cab roof overview 85
7 1 5 Vehicle information unit 86
7 1 6 Multi-function handle 86
7 1 7 Ground speed control lever 87
7 1 8 Adjusting the steering column 87
7 1 9 Multi-function switch 88
7 1 10 Driver’s seat, mechanical suspension (option) 89
7 1 11 Driver’s seat, air suspension (option) 90
7 1 12 Automatic air conditioner 90
7 1 13 Switching on the automatic air conditioner 91
7 1 14 Automatic cab temperature adjustment 91
7 1 15 Manual cab temperature adjustment 91
7 1 16 Adjusting the air conditioner air flow 92
7 1 17 Dehumidifying the cab windowpane 93
7 1 18 Displaying the outside temperature 93
7 1 19 Converting the temperature display to °Fahrenheit 93
7 1 20 Opening the cab roof 94
7 1 21 Closing the cab roof 94
7 1 22 Windscreen washer container of front windscreen 95
7 1 23 Windscreen washer container of side windows 95
7 1 24 Operator’s platform sockets 96
7 1 25 Operator’s platform controls 96
7 1 26 Access ladder 97
7 1 27 Opening the central terminal compartment 97
7 1 28 Closing the central terminal compartment 98
7 1 29 Central terminal compartment 98
8 000 293 899 0 – BA JAGUAR 900-830 – 03/06
2833
7 1 30 Adjusting the ground speed control lever operating smoothness 102
7 2 Chassis 104
7 2 1 CLAAS 4-Trac system (option) 104
7 3 Machine components 105
7 3 1 Tool box 105
7 3 2 Work lights and headlights 105
7 3 3 Socket 12 Volt 106
7 4 Engine 107
7 4 1 Ignition switch 107
7 4 2 Diesel engine speed 107
7 4 3 Start diesel engine 107
7 4 4 Stopping the diesel engine 109
7 5 Brake system 110
7 5 1 Foot brake 110
7 5 2 Parking brake 111
8 Mounting/dismounting the front attachment and the trailer
8 1 Hydraulic system 112
8 1 1 Adjusting the machine hydraulic system to the front attachment 112
8 2 Brake system 114
8 2 1 Hitching a trailer with compressed-air brake (accessory) 114
8 2 2 Unhitching a trailer with compressed-air brake (accessory) 115
8 3 Central lubrication system 116
8 3 1 Connecting the central lubrication system to the front attachment 116
9 Driving and transportation
9 1 General Information 117
9 1 1 Preparing road travel 117
9 1 2 Preparing fieldwork 119
9 1 3 Steering 122
9 1 4 Parking the machine 122
9 1 5 Manoeuvring the machine 122
9 1 6 Driving behaviour 123
9 1 7 Towing the machine 123
9 2 Driver’s console 125
9 2 1 Adjusting the mechanically suspended driver’s seat (option) 125
9 2 2 Adjusting the air suspended driver’s seat (option) 127
9 2 3 Shifting gears 131
9 3 Chassis 132
9 3 1 Activating the CLAAS 4-Trac system (option) 132
9 3 2 Deactivating the CLAAS 4-Trac system (option) 132
9 4 Hydraulic system 133
9 4 1 Pitching dampening 133
9 4 2 Learning pitching dampening 133
9 4 3 Switching on the pitching dampening 134
9 5 Engine 135
9 5 1 Diesel engine speed control during road travel (electro-hydraulic) 135
9 5 2 Diesel engine speed control during fieldwork (electro-hydraulic) 135
000 293 899 0 – BA JAGUAR 900-830 – 03/06 9
2833
9 6 Brake system 136
9 6 1 Testing the brake pressure switch 136
9 6 2 Applying the parking brake 136
9 6 3 Releasing the parking brake 136
9 6 4 Braking the machine using the multifunction lever 137
9 6 5 Braking the machine using the foot brake 137
9 6 6 Compressed-air brake system (accessory) frost protection pump 138
9 6 7 Activating the compressed-air brake system (accessory) frost protection pump 138
9 6 8 Deactivating the compressed-air brake system (accessory) frost protection pump 138
10 Fieldwork settings
10 1 General warnings 139
10 2 Feeder 140
10 2 1 Fitting the bottom plate 140
10 3 Chopping 141
10 3 1 Installing the knife carrier protection (accessory) 141
10 3 2 Reducing the number of chopper knives 141
10 3 3 Mounting the chopper knife micro rasp bar system (accessory) 142
10 3 4 Chopper bottom plate (option) 145
10 3 5 Manual length of cut pre-setting 146
10 3 6 Adjusting the chopper bottom plate 146
10 4 Corn cracker 149
10 4 1 Putting the corn cracker (option) out of operation 149
10 4 2 Installing the filler housing (option) 151
10 4 3 Installing the corn cracker (option) 152
11 CIS operation
11 1 General Information 156
11 1 1 Functions and displays 156
11 1 2 Prior to initial commissioning 156
11 2 Driver’s console 157
11 2 1 Overview – status displays A 157
11 2 2 Overview – monitor section B 159
11 2 3 Overview – key portion C 161
11 2 4 Display of functions / operating data 162
11 2 5 Changing values 162
11 2 6 Displaying and setting the time 162
11 2 7 Displaying the total working hours (CIS with fieldwork computer) 163
11 2 8 Displaying/resetting the working hours daily total (CIS with fieldwork computer) 163
11 2 9 Display of operating hours 163
11 2 10Displaying/resetting the daily area (CIS with fieldwork computer) 164
11 2 11 Displaying the rate of work (CIS with fieldwork computer) 164
11 2 12Displaying the total area (CIS with fieldwork computer) 165
11 2 13Displaying the next service interval due / Time overdue (CIS with fieldwork computer) 165
11 2 14Confirming the service carried out (CIS with fieldwork computer) 166
11 2 15Defining the pulses/100 m 166
11 2 16Defining the pulses/100 m by a calibration run 166
11 2 17Defining the pulses/100 m by entering values directly 167
11 2 18Setting the unit 167
10 000 293 899 0 – BA JAGUAR 900-830 – 03/06
2833
11 2 19Saving the working position (CIS with fieldwork computer) 168
11 2 20Setting the working width (CIS with fieldwork computer) 168
11 2 21Setting the front attachment partition (CIS with fieldwork computer) 169
11 2 22Setting the front attachment partial width (CIS with fieldwork computer) 170
11 2 23 Learning the ground speed control lever 171
11 2 24Setting the driving strategy 172
11 3 Feeder 174
11 3 1 Metal detector sensitivity adjustment 174
11 3 2 Monitoring the pressure of the lift cylinder in connection with
the ground pressure control 174
11 3 3 Monitoring the height of the front attachment / pre-set cutting height setting control 175
11 3 4 Learning the limit stops of the Contour system 175
11 3 5 Checking the front attachment height potentiometer 176
11 3 6 Setting the potentiometer front attachment height 177
11 3 7 Feed stops 178
11 4 Chassis 179
11 4 1 Learning the Autopilot system 179
11 5 Engine 181
11 5 1 Displaying the engine load drop 181
11 5 2 Engine speed display 181
11 5 3 Setting the working speed 181
11 5 4 Fuel consumption display (accessory) 183
11 6 Chopping 184
11 6 1 Adjusting the length of cut 184
11 6 2 Adjusting the number of knives 184
11 6 3 Automatic sharpening and shear bar adjustment 184
11 6 4 Setting the number of sharpening cycles 185
11 6 5 Sharpening memory function 186
11 6 6 Setting the time interval until the next sharpening operation 186
11 6 7 Monitoring the time until the next sharpening operation 187
11 6 8 Switching on automatic sharpening 188
11 6 9 Automatic sharpening monitoring 189
11 6 10Resetting the total sharpening cycles 191
11 6 11 Setting the shear bar clearance 192
11 6 12Switching on the automatic shear bar feature 193
11 6 13Monitoring the automatic shear bar feature 194
11 6 14Resetting the residual knife condition 195
11 6 15Setting the shear bar basic adjustment 195
11 6 16Checking the automatic sharpening and shear bar sensors 198
11 7 Corn cracker 200
11 7 1 Displaying the cracker roller gap (option) 200
11 7 2 Programming the cracker roller gap (option) 200
11 8 Discharge 202
11 8 1 Learning the upper discharge chute limit stops 202
000 293 899 0 – BA JAGUAR 900-830 – 03/06 11
2833
12 Fieldwork
12 1 General warnings 203
12 2 Driver’s console 204
12 2 1 Cutting height control 204
12 2 2 Saving the cutting height 205
12 2 3 Saving the ground pressure 206
12 2 4 Activating the cutting height control 207
12 2 5 Deactivating the cutting height control 208
12 3 Feeder 209
12 3 1 Engaging the feeder unit 209
12 3 2 Metal detection system 210
12 3 3 Activating the stone detector (accessory) 210
12 3 4 Deactivating the stone detector (accessory) 211
12 3 5 Reversing 211
12 3 6 Activating reversing 211
12 4 Chassis 212
12 4 1 CLAAS Autopilot (accessory) 212
12 4 2 Activating CLAAS Autopilot (accessory) 212
12 4 3 Deactivating CLAAS Autopilot (accessory) 213
12 4 4 Adjusting the CLAAS Autopilot (accessory) centre offset 213
12 5 Machine components 214
12 5 1 Silage additive pump 214
12 5 2 Switching on the silage additive system 214
12 5 3 Switching off the silage additive system 215
12 5 4 Silage additive tank 215
12 5 5 Silage additive system dosing nozzle 216
12 5 6 Selecting the silage additive system dosing nozzle 216
12 6 Engine 217
12 6 1 Filling up the machine 217
12 7 Chopping 218
12 7 1 Switching on the chopper unit 218
12 7 2 Stopping the chopper unit 218
12 7 3 Cutting cylinder knives 218
12 7 4 Sharpening the cutting cylinder knives 219
12 7 5 Shear bar 220
12 7 6 Adjusting the sharpening stone manually 220
12 7 7 Sharpening stone special tool 222
12 8 Corn cracker 223
12 8 1 Corn cracker (option) 223
12 8 2 Adjusting the corn cracker gap electrically (option) 223
12 8 3 Adjusting the corn cracker gap mechanically (option) 224
12 9 Discharge 225
12 9 1 Discharge accelerator 225
12 9 2 Upper discharge chute 225
12 9 3 Raising the upper discharge chute 225
12 9 4 Swivelling the upper discharge chute 226
12 9 5 Lowering the upper discharge chute 226
12 9 6 Activating the automatic upper discharge chute swivel control (accessory) 226
12 000 293 899 0 – BA JAGUAR 900-830 – 03/06
2833
12 9 7 Saving the upper discharge chute automatic swivel control (accessory) swivel position 227
13 Faults and remedies
13 1 Operator’s platform 229
13 1 1 Automatic air conditioner fault code table 229
13 1 2 Air conditioner faults and remedies 229
13 1 3 CIS alarm types 231
13 1 4 CIS Fault code table 233
13 2 Chassis 252
13 2 1 Faults and remedies of CLAAS Autopilot 252
13 2 2 Putting the shifter rail lock hydraulic cylinder out of operation 253
13 3 Engine 255
13 3 1 Coolant temperature display lights up 255
13 4 Corn cracker 256
13 4 1 Manually adjusting the corn cracker (option) with electrical gap adjustment 256
13 5 Central lubrication system 257
13 5 1 Central lubrication system faults and remedies 257
14 Maintenance
14 1 General warnings 261
14 2 General Information 262
14 2 1 Front attachment 262
14 2 2 Cleaning the engine compartment and hazard areas 262
14 2 3 Belts 262
14 2 4 Variable-speed drives 262
14 2 5 Bolts 262
14 2 6 Lubrication 262
14 2 7 Brakes 263
14 2 8 Wheels / tyres 264
14 2 9 Hydraulic system 264
14 2 10Electrical system 265
14 2 11Air conditioner 267
14 2 12Protective guards 268
14 2 13Spare parts 268
14 2 14Unbalance 268
14 2 15Welding work on the forage harvester 268
14 2 16Putting the machine out of action 270
14 2 17Jack up the machine 270
14 2 18Winter storage of the forage harvester 271
14 2 19Coolant 272
14 3 Maintenance schedule 273
14 3 1 Service intervals 273
14 4 Lubricants chart 276
14 4 1 Lubricants 276
14 5 Driver’s console 279
14 5 1 Cleaning the cab air filter 279
14 5 2 Cleaning the air conditioner condenser 279
14 5 3 Checking the air conditioner coolant level 279
14 5 4 Checking the fire extinguisher 280
000 293 899 0 – BA JAGUAR 900-830 – 03/06 13
2833
14 6 Electrical system 281
14 6 1 Checking the battery electrolyte level 281
14 7 Feeder 282
14 7 1 Folding down the feeder 282
14 7 2 Removing the feeder 285
14 7 3 Fitting the feeder 288
14 7 4 Adjusting the bottom feed roller scraper 290
14 7 5 Adjusting the feed roller brake 291
14 7 6 Checking the top rollers gearbox oil level 292
14 7 7 Draining the top rollers gearbox oil 292
14 7 8 Topping up the top rollers gearbox oil 293
14 7 9 Checking the feeder gearbox oil level 294
14 7 10Draining the oil from the feeder gearbox 294
14 7 11Topping up oil into the feeder gearbox 295
14 8 Drives 297
14 8 1 Adjusting the chopper unit belt 297
14 8 2 Relieving the tension of chopper unit belt 297
14 8 3 Removing the chopper unit belt 298
14 8 4 Installing the chopper unit belt 299
14 8 5 Removing the fan belt 302
14 8 6 Adjusting the fan belt 303
14 8 7 Installing the fan belt 303
14 8 8 Removing the corn cracker (option) belt 304
14 8 9 Adjusting the corn cracker (option) belt 304
14 8 10Installing the corn cracker (option) belt 305
14 8 11Removing the feeder belt 306
14 8 12Installing the feeder belt 306
14 8 13Adjusting the feeder hydrostatic motor belt 307
14 9 Chassis 309
14 9 1 Checking the drive axle gearbox oil level 309
14 9 2 Draining the oil from the drive axle gearbox 309
14 9 3 Topping up oil in the drive axle gearbox 310
14 9 4 Checking the axle drive oil level 310
14 9 5 Draining the axle drive oil 311
14 9 6 Topping up the axle drive oil 312
14 9 7 Checking the rear drive axle (option) differential oil level 312
14 9 8 Draining the oil from the rear drive axle (option) differential 313
14 9 9 Topping up oil in the rear drive axle (option) differential 314
14 9 10Checking the rear drive axle (option) final drive oil level 314
14 9 11Draining the oil from the rear drive axle (option) final drive 314
14 9 12Topping up oil in the rear drive axle (option) final drive 315
14 9 13Checking the rear drive axle (option) drive gearbox oil level 316
14 9 14Draining the oil from the rear drive axle (option) drive gearbox 316
14 9 15Topping up oil in the rear drive axle (option) drive gearbox 317
14 10Machine components 319
14 10 1Side panel 319
14 10 2Flushing the silage additive system 319
14 10 3Cleaning the silage additive system nozzle 320
14 000 293 899 0 – BA JAGUAR 900-830 – 03/06
2833
14 10 4Cleaning the silage additive system filter 320
14 10 5Winter storage of silage additive system 321
14 10 6Compressed-air cleaning system 322
14 10 7Checking the compressed-air cleaning system drain valve 324
14 10 8Checking the compressed-air cleaning system accumulator 325
14 10 9Checking the compressed-air cleaning system pressure controller 325
14 10 10Checking the compressed-air cleaning system safety valve 326
14 11Hydraulic system 327
14 11 1Relieving the accumulator pressure 327
14 11 2Checking the hydraulic tank oil level 327
14 11 3Draining the oil from the hydraulic tank 327
14 11 4Draining the oil from the hydrostatic motor 328
14 11 5Replacing the hydrostatic pump oil filter 329
14 11 6Replacing the hydraulic tank return filter 330
14 11 7Filling oil into the hydrostatic motor 331
14 12Engine 332
14 12 1Engine overview DAIMLER CHRYSLER OM 502 LA 332
14 12 2Engine overview DAIMLER CHRYSLER OM 460 LA 332
14 12 3Overview of cooling units 333
14 12 4Checking the transfer gearbox oil level 333
14 12 5Draining the oil from the transfer gearbox 334
14 12 6Topping up oil in the transfer gearbox 335
14 12 7Checking the fan gearbox oil level 335
14 12 8Draining the fan gearbox oil 336
14 12 9Topping up fan gearbox oil 337
14 12 10Draining fuel from the fuel tank 337
14 12 11Cleaning the fuel sediment bowl filter 338
14 12 12Replacing the fuel filter 339
14 12 13Changing the fuel pre-filter 339
14 12 14Bleed fuel system 340
14 12 15Checking the diesel engine oil level 341
14 12 16Diesel engine oil change 341
14 12 17Replacing the diesel engine oil filter 343
14 12 18Topping up oil in the diesel engine 344
14 12 19Replacing the diesel engine vent filter 345
14 12 20Draining coolant from the water cooler 346
14 12 21Topping up coolant 347
14 12 22Identify the coolant type 348
14 12 23Coolant mixing ratio 348
14 12 24Changing the coolant 349
14 12 25Cleaning the cooling unit 350
14 12 26Cleaning air filter suction screen 351
14 12 27Cleaning the diesel engine air filter 352
14 12 28Replacing the diesel engine air filter safety filter cartridge 353
14 13Chopping 355
14 13 1Arresting the cutting cylinder 355
14 13 2Adjusting the chopper knives 356
000 293 899 0 – BA JAGUAR 900-830 – 03/06 15
2833
14 13 3Replacing the chopper knives 358
14 13 4Replacing the shear bar 360
14 14Corn cracker 362
14 14 1Checking the corn cracker (option) gap dimension 362
14 14 2Adjusting the corn cracker (option) gap dimension 362
14 14 3Venting the corn cracker (option) hydraulic system 364
14 14 4Cleaning the corn cracker (option) 366
14 14 5Checking the corn cracker (option) rollers 366
14 14 6Greasing the corn cracker (option) manually 367
14 15Discharge 368
14 15 1Cleaning the discharge chute 368
14 15 2Cleaning the discharge space 368
14 15 3Replacing the discharge accelerator thrower bar 368
14 15 4Readjusting the discharge accelerator paddle wheel 369
14 15 5Upper discharge chute wear plates 371
14 15 6Adjusting the upper discharge chute safety device 372
14 16Brake system 373
14 16 1Topping up the compressed-air brake system (accessory) frost protection pump container 373
14 16 2Topping up brake liquid 373
14 16 3Checking the compressed-air brake system (accessory) drain valve 374
14 17Central lubrication system 376
14 17 1Central lubrication system 376
14 17 2Central lubrication system pressure switch 377
14 17 3Filling the central lubrication system container 377
14 17 4Switching on the central lubrication system manually 379
14 17 5Manual greasing using the central lubrication system 380
15 Lubrication chart
15 1 Lubrication points 381
15 1 1 Lubricants 381
15 1 2 Greasing cycles 381
15 1 3 Lubrication points – 10 h on the left 384
15 1 4 Lubrication points – 10 h on the right 385
15 1 5 Lubrication points – 50 h on the left 386
15 1 6 Lubrication points – 50 h on the right 387
15 1 7 Lubrication points – 100 h on the left 389
15 1 8 Lubrication points – 100 h on the right 390
15 1 9 Lubrication points – 250 h on the left 391
15 1 10Lubrication points – 500 h on the left 393
15 1 11 Lubrication points – 500 h on the right 394

CLAAS JAGUAR 900 – 830 PROFISTAR JAGUAR 900 – 830 SPEEDSTAR TYPE 493 OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V