CLAAS JAGUAR 900–830R Additional Damping for DIRECT DISC Fitting Instructions Manual_DE_EN_FR_IT_RU

Description

CLAAS JAGUAR 900–830R Additional Damping for DIRECT DISC Fitting Instructions Manual_DE_EN_FR_IT_RU

DESCRIPTION:

CLAAS JAGUAR 900–830R Additional Damping for DIRECT DISC Fitting Instructions Manual_DE_EN_FR_IT_RU

Introduction

• This manual contains information regarding the use, setting and operation of the big square baler CLMS QUADRANT 1200 ROTO CUT.
• Provided you follow the advice on the care and servicing of your machine you will be rewarded with reliable operating efficiency and long service from your square baler.
• We recommend that you allow your local CL丛 S Dealer to overhaul and service your square baler immediately after the season, adhering to the recommended winter service schedule contained in this manual.
• Omissions of parts of a service, or incorrect adjustments lead to a drop in performance and cost valuable time.
• By correct servicing and operation you can make full use of the latest technical knowledge and experience in mechanised handling of fodders and straw with which your machine has been designed, and thereby insure reliability of your CLMS QUADRANT 1200.

Important note

• The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine in order to prevent accidents.
• Especially the SAFETY RULES In this manual should be read with the utmost care an adhered to The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design characteristics of the CLAAS thine or can detract from its functional performance, with a possible adverse affect on the active and/or passive operational safety of the machine and its occu- pational saf呴 standards(accident prevention).
• CLAAS is in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment. Technical data, dimensions and weights are given as an indication only. Following the policy of CLAAS to improve their products as technical developments continue, CLAAS reserve the right to make alterations. Responsibility for errors or omissions not accepted. Front, rear, right-hand and left-hand always refer to the machine as seen In the direction of forward travel.
  TABLE OF CONTENTS:

CLAAS JAGUAR 900–830R Additional Damping for DIRECT DISC Fitting Instructions Manual_DE_EN_FR_IT_RU

Important note
Identification plate
Baler serial number
Safety rules 1 0
588
Safety decals with pictorials 13
1 Technical Data
CLAAS QUADRANT 1200 ROTO CUT 1 1
Safety features 1 5
Description and function 1 7
Basic components of the machine 1 9
2 Before Operation
Before using the machine carry out these operations 2 1
Baler hook-up 2 2
Drawbar 2 2
Universal drawbar for top and bo廿om hitching 2 2
Adjusting the hitch eye 2 3
Grease hitch eye 2 3
Double universal drive shaft 2 4
Fitting the universal drive shaft to the machine 2 4
Fitting the universal drive shaft to the tractor 2 4
础aching the safety wire rope 2 5
Unhitching the baler 2 6
Jackstand 2 6
Electrical system 2 6
Hydraulic system 2 7
Air-operated braking system 2 7
Connecting the air hoses 2 8
Disconnecting the air hoses 2 8
Hydraulic-operated braking system 2 9
Parking brake 2 9
Ladder 2 9
Wheel chocks 2 9
Roller chute 2 10
Cleaning fan 2 10
12 volt socket 2 1 0
Before transporting the baler 2 11
3 Operation
Pick-up 3
Adjusting the working height of the pick-up 3
Pick-up crop guard 3 1
Short crop baffle 3 2
Cu 廿ing unit 3 2
Engaging and disengaging knives 3 2
Removing knives 3 3
Baling 3 4
Adjusting the roller-type bale chute 3 4
Bale density control 3 4
Clearing the bale chamber 3 5
Bale ejector 3 5
Raising the bale chamber bottom 3 6
Bale counter 3 7
Shear bolts 3 7
Main drive 3 7
Pick-up drive 3 8
Kno廿er shaft drive 3 8
Cut-out clutch for cu 廿ing unit 3 8
Tying 3 9
Twine boxes 3 9
Threading twine 3 9
Adjusting twine run 3 11
Electrical twine monitor 3 12
Se廿ing the lengths of the bales 3 12
Starting work 3 13
Guide to bale density settings 3 13
Drive Line Load Control (DLC) 3 14
After work 3 14
Problem, Cause or Remedy 315
4 Maintenance
Important Maintenance Instructions 4 1
Maintenance chart 4 2
Lubricant chart 4 3
Brake system 4 4
Air-operated brakes 4 4
Drain air reservoir 4 4
Brake cylinder 4 5
Brake linings 4 5
Drives 4 5
Main gearbox 4 5
Upper angle drive gearbox 4 6
Lower angle drive gearbox 4 6
Rear angle drive gearbox 4 7
Hydraulic system 4 7
Adjusting connecting rod for hay dogs 4 8
Tensioning the suspension tension spring for
the pick-up 4 8
Adjusting the tension of the drive chains 4 8
Tensioning the tension spring for the pick-up drive 4 9
Tensioning the drive chain for the cross auger 4 9
Adjusting the springs of the twine retainers 4 9
Adjusting the springs of the knotter hooks 4 9
Kno廿er shaft brake 4 10
Adjusting the knotter pinion for correct play 4 10
Needle carrier brakes 4 11
Basic se廿ing 412
Tying mechanism 4 13
Adjusting knotter shaft and needles 4 13
Checking the needle position relative to the ram 4 15
Ram stop 416
Twine fingers 4 18
Winter storage instructions 4 19
7
IMAGES PREVIEW OF THE MANUAL:

CLAAS JAGUAR 900–830R ADDITIONAL DAMPING FOR DIRECT DISC FITTING INSTRUCTIONS MANUAL_DE_EN_FR_IT_RU:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

s.m