Claas JAGUAR 980 – 930 Chopper Unit Conversion instructions Manual – PDF DOWNLOAD

Description

Claas JAGUAR 980 – 930 Chopper Unit Conversion instructions Manual – PDF DOWNLOAD

IMAGES OF MANUAL:

DESCRIPTION:

Claas JAGUAR 980 – 930 Chopper Unit Conversion instructions Manual – PDF DOWNLOAD

General instructions
Safety precautions

Work may be carried out only by specialist
workshops authorised by CLAAS and having
qualified personnel.
The general safety, accident prevention and environmental
protection regulation must be observed.
Read and observe the Safety chapter in the Operator’s
manual.
Carry out work under the raised machine/front attachment
or raised components only when a safe support
is provided.
Before carrying out work on the hydraulic system,
lower machine/front attachment and hydraulically
actuated components to the ground. Depressurise
the system.
All work must be carried out with the drive disengaged
and the engine stopped! – Remove the
ignition key!
Relieve the tension of pre-loaded energy accumulators
(springs, accumulators, hydraulic cylinders) and
of components which are pre-loaded by energy accumulators
properly prior to starting installation work!
Check the tight seat of all bolts after assembly.
Carry out a function test.

PLEASE NOTE:

• This is the same manual used by DEALERS to SERVICE your vehicle.
• The manual can be all yours – Once the payment has been made, you will be redirected to the download page where you can download the manual. All in 2 to 5 minutes!!
• If you need another service/repair/parts manual, please feel free to contact us at [email protected]. We can surprise you with a good offer

S.M