CLAAS JAGUAR LEXION 560 – 510 LEXION 560 TERRA TRAC LEXION 560 Montana – 520 Montana Cab Heater Fitting Instructions Manual_DE_EN_FR

Description

CLAAS JAGUAR LEXION 560 – 510 LEXION 560 TERRA TRAC LEXION 560 Montana – 520 Montana Cab Heater Fitting Instructions Manual_DE_EN_FR

DESCRIPTION:

CLAAS JAGUAR LEXION 560 – 510 LEXION 560 TERRA TRAC LEXION 560 Montana – 520 Montana Cab Heater Fitting Instructions Manual_DE_EN_FR

INTRODUCTION

• These instructions describe the safe and timesaving work sequence for retrofitting the autopilot.
• Retrofitting of the LEXION 480 – 410 combine harvesters, with the supplementary kit part no. 014 612.3, is possible from the following machine number ranges: starting from 54300011, starting from 54400011, starting from 54500011, starting from 54600011, starting from 54700011, starting from 54800011, starting from 55300800, starting from 55400800, starting from 55700800, starting from 56500800, starting from 56600800, starting from 56700800 and starting from 56800800.
• The standard mounting time is approx. 5.5 man hours. See page 4.1 for the shipping package. Observe the „Safety Rules“ in the applicable operator’s manual.

General information
IMPORTANT

• The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine/ front attachment in order to prevent accidents.
• Especially the „Safety Rules“ in the operator’s manual should be read with the utmost care and adhered to. In addition, please also observe the accident prevention regulations that apply for your own country.
• Before commencing with the job, ensure that all the tools and service aids are available. Compare existing machine type/front attachment type with the list in the chapter „Shipping Package“ and the parts kit supplied. The specification of the components, e.g. bolts, is shown on the shipping package.
• The shipping package shows the position number (pos. no.) of the components. Parts such as nuts and contact washers do not have a position number but belong to the bolt listed above which does have a position number. Additional part specifications are the parts no., description, measurements, DIN and the quantity. In order to help with the assembly, existing components in the instructions are identified with letters, whereas new parts have been identified with a number (position number).
• Texts and pictures apply, in general, to all machine types covered by this book and the information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text. Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes subsequently as technical developments continue. Responsibility for errors or omissions not accepted. Front, rear, right and left refer to the direction of forward travel

TABLE OF CONTENTS:

CLAAS JAGUAR LEXION 560 – 510 LEXION 560 TERRA TRAC LEXION 560 Montana – 520 Montana Cab Heater Fitting Instructions Manual_DE_EN_FR

1 Introduction
Introduction 11
2 Contents
Inhalt 21
3 General
information
Important 31
Identification of warnings and danger signs 32
Correct use 32
4 Shipping Package
Shipping Package 41
Supplementary kit 014 6123 41
5 Installation
Installing the Autopilot 51
Preparing the installation 51
Installing the Autopilot valve with accessories 51
Pre-assembling the Autopilot valve (1) 51
Routing and fastening the hose lines 52
Installing the steering cylinder (1) with the wiring loom (2) 55
Dismounting the steering cylinder (1) 55
Installing the steering cylinder (1) 56
Routing and connecting the Autopilot wiring loom (1) 57
Installing and connecting module (1) in
central terminal compartment: 510
Fitting the nominal value sender (1) and
the toggle switch (2) 512
Installing the overrider switch (6) 514
Installing the earth strips (1) 516
Preparing and performing the test run 517
IMAGES PREVIEW OF THE MANUAL:

CLAAS JAGUAR LEXION 560 – 510 LEXION 560 TERRA TRAC LEXION 560 MONTANA – 520 MONTANA CAB HEATER FITTING INSTRUCTIONS MANUAL_DE_EN_FR:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

s. m