CLAAS LEXION 470 MONTANA 430 MONTANA LEXION 460 – 410 480 470 SUPPLEMENT TO OPERATOR’S MANUAL – PDF DOWNLOAD

Description

CLAAS LEXION 470 MONTANA 430 MONTANA LEXION 460 – 410 480 470 SUPPLEMENT TO OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

CLAAS LEXION 470 MONTANA 430 MONTANA LEXION 460 – 410 480 470 SUPPLEMENT TO OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION This supplement is for the CLAAS LEXION 470
Montana and the LEXION 430 Montana combine harvesters.
Only those items which deviate from the original
manual are included.
Group 4
Safety Rules
Group 5
Specifications
Group 6
Prior to operation
Group 10
Maintenance – basic machine
Group 11
Maintenance – engine
Group 12
Lubrication chart

SAFETY RULES

ANGER!
Important instruction!
1. Prior to road travel, ensure the machine is completely
lowered.
2. When turning, never turn in the direction of
downhill, but always turn uphill.
3. When operating on steep slopes, always operate
sideways or uphill.
4. Be especially careful when working on slopes!
The speed must always match the ground conditions.
The machine must always be operated in the
horizontal position (level).
5. Should a fault occur with the automatic levelling,
then stop the machine immediately.
Switch off the automatics. Level the machine
manually.
6. When working on slopes, the brake pedals must
be locked together.
Never operate the brakes individually.
7. Be especially careful when working in the dark!
8. Take care for high voltage power lines!
9. Be especially careful when using the ladder on the
downhill side. When stepping up or down from the
machine, if it is necessary correct the angle
manually.
TABLE OF CONTENTS:

CLAAS LEXION 470 MONTANA 430 MONTANA LEXION 460 – 410 480 470 SUPPLEMENT TO OPERATOR’S MANUAL – PDF DOWNLOAD

CONTENTS
1. Introduction
Introduction …………………………………………………………………. 1.1.1
2. Contents
Contents …………………………………………………………………….. 2.1.1
4. Safety Rules
Safety Rules ……………………………………………………………….. 4.1.1
Safety decals with pictorials …………………………………………… 4.2.1
5. Specifications
CLAAS LEXION 470 Montana ……………………………………….. 5.1.1
CLAAS LEXION 430 Montana ……………………………………….. 5.2.1
6. Prior to operation
Slope compensation …………………………………………………….. 6.1.1
Operator’s platform overview ……………………………………. 6.1.2
Control console ………………………………………………………. 6.1.3
Slope compensation control box ………………………………. 6.1.4
Monitor ………………………………………………………………….. 6.1.5
Machine operation ………………………………………………….. 6.1.6
Axle (wheel angle) ………………………………………………….. 6.1.6
Cutterbar ……………………………………………………………….. 6.1.6
Axle (wheel angle) and cutterbar ………………………………. 6.1.7
Menu …………………………………………………………………….. 6.1.9
Cutterbar adjustment key pad (yellow) ………………………. 6.1.9
Axle adjustment key pad (green) ………………………………. 6.1.9
Calibration …………………………………………………………… 6.1.10
Calibrating the inclinometer ……………………………………. 6.1.10
Calibrating the wheel rams …………………………………….. 6.1.11
Calibrating the cutting angle …………………………………… 6.1.11
Calibrating the cross levelling …………………………………. 6.1.11
Calibrating the trunking (feeder housing) …………………. 6.1.12
Setup ………………………………………………………………….. 6.1.13
System info ………………………………………………………….. 6.1.14
Inclinoinfo ……………………………………………………………. 6.1.14
Access ladder ………………………………………………………. 6.1.15
Front ladder …………………………………………………………. 6.1.15
Checking the control lights …………………………………….. 6.1.16
Driving the combine ………………………………………………. 6.1.16
Engine speed rotary switch ……………………………………. 6.1.16
Gear selection ……………………………………………………… 6.1.17
Manoeuvring ………………………………………………………… 6.1.17
Hydrostatic ground drive ………………………………………… 6.1.18
Starting the engine ……………………………………………….. 6.1.19
Stopping ……………………………………………………………… 6.1.20
Driving behaviour ………………………………………………….. 6.1.20
Steering ………………………………………………………………. 6.1.20
Brakes ………………………………………………………………… 6.1.21
Foot brake …………………………………………………………… 6.1.21
Parking brake ………………………………………………………. 6.1.22
Releasing the parking brakes mechanically ……………… 6.1.22
Turn gears into «0» (neutral position) ………………………. 6.1.23
Differential lock …………………………………………………….. 6.1.23
Engaging the differential lock …………………………………. 6.1.23
Disengaging the differential lock ……………………………… 6.1.23
Malfunction, possible cause or remedy ……………………. 6.1.24
10. Maintenance – basic machine
Maintenance schedules and lubricants charts ……………….. 10.1.1
Maintenance schedule ………………………………………….. 10.1.1
Lubricants chart ……………………………………………………. 10.1.2
Gearboxes ………………………………………………………………… 10.2.1
Differential and axle support ………………………………….. 10.2.2
Checking the oil level ……………………………………………. 10.2.2
Oil change …………………………………………………………… 10.2.2
Wheel pivots ………………………………………………………… 10.2.3
Checking the oil level ……………………………………………. 10.2.3
Oil change …………………………………………………………… 10.2.3
Planetary gearbox ………………………………………………… 10.2.3
Checking the oil level ……………………………………………. 10.2.3
Oil change …………………………………………………………… 10.2.3
2-speed gearbox ………………………………………………….. 10.2.4
Checking the oil level ……………………………………………. 10.2.4
Oil change …………………………………………………………… 10.2.4
Rotary frame guide roller adjustment ………………………. 10.2.4
Adjusting the sensor for the
cutting angle adjustment ……………………………………….. 10.2.4
Adjusting the sensor for the wheel pivots …………………. 10.2.5
11. Maintenance – engine
Important maintenance instructions ……………………………… 11.1.1
Important maintenance instructions
and safety rules …………………………………………………… 11.1.1
Maintenance schedules and lubricants charts ……………….. 11.2.1
Maintenance schedule ………………………………………….. 11.2.1
Lubricants chart ……………………………………………………. 11.2.2
12. Lubrication chart
Lubricants and lubrication instructions ………………………….. 12.1.1
IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by dealerships to diagnose your vehicle
• No waiting for couriers/posts as this is a PDF manual and you can download it within 2 minutes once you complete the payment.
• Your payment is secure and delivery of the manual is INSTANT – You will be redirected to the DOWNLOAD PAGE.
• So do not hesitate and write to us for any questions you may have: heydownloadss @gmail.com