CLAAS LEXION 480 – 410 Grain/Vario Cutterbars Fitting Instructions Manual _DE_EN_FR

Description

CLAAS LEXION 480 – 410 Grain/Vario Cutterbars Fitting Instructions Manual _DE_EN_FR – PDF DOWNLOAD

DESCRIPTION:

CLAAS LEXION 480 – 410 Grain/Vario Cutterbars Fitting Instructions Manual _DE_EN_FR – PDF DOWNLOAD

INTRODUCTION

These instructions describe the safe and timesaving work sequence for retrofitting the Laser Autopilot. The combine harvester Lexion 480-410 must be equipped with Autopilot. Retrofitting the grain/Vario cutterbars for the LEXION 480-410 combine harvesters, with the supplementary kit part no. 765 609.0, is possible from the following machine number range: 54300011 to 54800011. The standard mounting time is approx. 1 man hour. See page 4.1 for the shipping package. Observe the »Safety Rules« in the applicable operator’s manual.
TABLE OF CONTENTS:

CLAAS LEXION 480 – 410 Grain/Vario Cutterbars Fitting Instructions Manual _DE_EN_FR – PDF DOWNLOAD

1 Introduction
Introduction 11
2 Contents
Contents 21
3 General
information
Important 31
Identification of warnings and danger signs 32
Correct use 32
4 Shipping Package
Shipping Package 41
Supplementary kit 765 6090 41
5 Installation
Installing the laser Autopilot 51
Preparing the installation 51
Installing the laser sensor 51
Installing the spacer (12) for cutterbars with
rape equipment 53
Installing the brace (13) for Vario cutterbar only 54
Installing the wiring loom (14) 54
Preparing and performing the test run 56
IMAGES PREVIEW OF THE MANUAL:

 
CLAAS LEXION 480 – 410 GRAIN/VARIO CUTTERBARS FITTING INSTRUCTIONS MANUAL _DE_EN_FR:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.M