CLAAS LEXION 570 MONTANA Operator’s Manual – PDF DOWNLOAD

Description

CLAAS LEXION 570 MONTANA Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS LEXION 570 MONTANA Operator’s Manual – PDF DOWNLOAD

INTRODUCTION :

This manual applies to the CLAAS Combine Harvesters LEXION 570 Montana. It is primarily intended for the machine operator and contains information on using, setting and operating the machine. In general, texts and pictures apply to all machine models covered by this manual.

• The information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text. Operation and maintenance of important accessories is also covered by this manual. A separate Operator’s Manual is available for cutterbars.
• Please read the instructions which apply to the appropriate accessories on your machine. Provided all instructions regarding maintenance and care of your machine are followed, you can count on many years of reliable service. Please have your authorized CLAAS dealer carry out the recommended regular inspections.
• The neglecting of regular maintenance and proper machine operation lead to reduced performance and loss of time. If proper operation and careful maintenance is ensured, your combine harvester, which incorporates latest harvesting technology, will render you excellent service.

This Operator’s Manual as well as the manuals listed below can be ordered from your CLAAS Dealer:
• Threshing Instructions for special crops
• Fitting and Operating Instructions for accessories

TABLE OF CONTENTS:

CLAAS LEXION 570 MONTANA Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 1 1 1
2 Contents
Contents 2 1 1
3 General information
Road traffic regulations 3 1 1
Important notice 3 2 1
Identification plate / Serial number 3 3 1
Identification plate 3 3 2
Machine serial number 3 3 2
Engine serial number
CATERPILLAR C-12 3 3 2
Straw chopper identification plate 3 3 3
Cab serial number 3 3 3
4 Safety Rules
Safety Rules 4 1 1
Cylinder safety lock 4 1 4
Fire extinguisher 4 1 4
Battery isolating switch 4 1 5
Wheel chocks 4 1 5
Positioning the wheel chocks 4 1 5
Hydraulic system 4 1 6
Danger of injury due
to escaping hydraulic liquid 4 1 6
Accumulators 4 1 7
Relieving the Auto-Contour accumulator 4 1 7
Relieving the Autopilot accumulator 4 1 7
Relieving the concave adjustment accumulator 4 1 8
Relieving the radial spreader accumulator 4 1 9
Relieving the standard spreader accumulator 4 1 10
Safety decals with pictorials 4 2 1
5 Specifications
Conversion factors 5 1 1
CLAAS LEXION 570 Montana 5 2 1
Front attachments –
weights and dimensions 5 2 8
Safety features 5 3 1
6 Prior to operation
Carry out prior to initial operation 6 1 1
Cab 6 2 1
Cab with automatic climate control 6 2 1
Automatic climate control 6 2 2
Operating and display elements 6 2 2
Putting the automatic climate control
into operation 6 2 3
Setting the cab temperature 6 2 4
Manually setting the evaporator
blower speed 6 2 4
Activating ECON operating mode 6 2 5
Deactivating ECON operating mode 6 2 5
REHEAT operation
(Dehumidify cab windows) 6 2 6
Displaying the outside temperature 6 2 7
Changing the temperature display
to °Fahrenheit 6 2 7
Floor heating 6 2 7
Display of malfunction:
error in thermometer F0
(cab, blue) 6 2 8
Display of malfunction:
error in thermometer F1
(exhaust, yellow) 6 2 8
Display of malfunction:
error in thermometer F2
(outside, red) 6 2 8
Cab with air conditioner
(standard version) 6 2 9
Putting the air conditioning system
into operation 6 2 10
Heater 6 2 12
Floor heating 6 2 12
Reheat system
(Steamed up windows) 6 2 12
Malfunction, possible cause or remedy –
air conditioner system 6 2 13
Cooling box 6 2 15
Cooling unit
(option) 6 2 15
Cooling bag
(option) 6 2 15
Ice bucket
(option) 6 2 15
Windscreen washer 6 2 16
Crop inspection 6 2 16
Opening and closing the cab roof 6 2 16
Operator’s platform 6 3 1
Operator’s platform overview 6 3 1
Control console 6 3 3
Monitor
(vehicle information display) 6 3 4
Monitor
(harvest display) 6 3 5
C-keys 6 3 6
Rotary switch D 6 3 6
Slope compensation 6 3 7
Slope compensation control box 6 3 8
Monitor 6 3 9
Machine operation 6 3 10
Axle (wheel angle) 6 3 10
Cutterbar 6 3 10
Axle (wheel angle) and cutterbar 6 3 11
Menu 6 3 13
Cutterbar adjustment key pad (yellow) 6 3 13
Axle adjustment key pad (green) 6 3 13
Calibration 6 3 14
Calibrating the inclinometer 6 3 14
Calibrating the wheel rams 6 3 15
Contents
2 1 2 BA LEXION 570 Montana – 0299 767 0
Contents
Calibrating the cutting angle 6 3 15
Calibrating the cross levelling 6 3 15
Calibrating the trunking
(feeder housing) 6 3 16
Setup 6 3 17
System info 6 3 18
Inclinoinfo 6 3 18
Steering column 6 3 19
Ignition switch 6 3 19
Multi-function switch 6 3 20
Vehicle information unit 6 3 21
Multi-function handle 6 3 22
Steering column adjustment 6 3 23
Adjusting the steering column top 6 3 23
Steering wheel height adjustment 6 3 24
Central terminal compartment 6 3 24
Fuses 6 3 26
Relays 6 3 28
Operator’s seat 6 3 30
Operator’s seat, mechanical 6 3 30
Operator’s seat “air suspension”
(option) 6 3 33
Lighting and socket outlets 6 4 1
Headlights, worklights, mirrors 6 4 1
Sidefinder
(option) 6 4 6
Pathfinder lighting 6 4 6
Side position lights in case of excess width 6 4 7
Socket outlets 6 4 11
Access ladder 6 5 1
Access and ladder extension 6 5 1
Front ladder 6 5 2
Mounting the ladder 6 5 2
Folding the ladder steps 6 5 6
Swinging the ladder 6 5 6
Rear ladder 6 5 8
Other uses of the rear ladder 6 5 9
Side panels 6 6 1
Opening and closing the side panels
and the tailgate 6 6 1
Opening the tailgate 6 6 2
Adjusting the gripping height
of the side panels 6 6 2
Adjusting the side panel lock 6 6 3
Tool cabinet 6 6 3
Toolbox 6 6 3
Folding down the tool cabinet 6 6 4
Fender / Mud-guards 6 7 1
Installing the fenders / mud-guards 6 7 1
Rear axles 6 8 1
Adjustable rear drive axle
(2 60 m – 3 20 m) 6 8 2
Altering the adjustable 2 60 m – 3 20 m
rear drive axle from transport
to working position 6 8 2
Adjusting the track width 6 8 4
Rear axle
(2 71 m – 3 16 m) 6 8 8
Altering the 2 71 m – 3 16 m rear axle
from transport to working position 6 8 8
Adjusting the track width 6 8 9
Additional weights of rear axle 6 9 1
Additional weights of rear axle
LEXION 570 Montana 6 9 1
Liquid filling for rear axle tyres 6 9 2
Mounting the rear axle weight 6 9 2
Cutterbar hydraulic cylinders 6 10 1
Cutterbar hydraulic cylinders 6 10 1
Third cutterbar cylinder 6 10 1
Grain tank 6 11 1
Closing the grain tank drain holes 6 11 1
Driving the combine 6 12 1
Checking the control lights 6 12 1
Driving the combine 6 12 1
Engine speed rotary switch 6 12 1
Average engine idle speed 6 12 2
Starting the engine 6 12 2
Stopping the engine 6 12 3
Gear selection 6 12 3
Manoeuvering 6 12 4
Hydrostatic ground drive 6 12 4
Adjusting the stiffness
of ground speed control lever 6 12 5
Stopping 6 12 5
Driving behaviour 6 12 5
Handling with cutterbar trailer 6 12 6
Steering 6 12 6
Brakes 6 12 6
Foot brake 6 12 6
Parking brake 6 12 7
Releasing the parking brakes mechanically 6 12 8
Gear shifting – Emergency operation 6 12 8
Turn gears into “0” (neutral position) 6 12 8
Towing the machine 6 12 9
Differential lock 6 12 9
Engaging the differential lock 6 12 9
Disengaging the differential lock 6 12 9
CLAAS Autopilot
(Maize picker head) 6 13 1
Putting the CLAAS Autopilot into operation 6 13 1
CLAAS Autopilot
(Grain cutterbar) 6 13 3
Adjusting the directional stability
of the combine harvester 6 13 3
Setting the laser sensor in the field 6 13 5
Rough adjustment 6 13 6
Fine adjustment 6 13 7
Laser sensor
(crop edge has moved out of visible range) 6 13 7
Setting up the right-hand laser sensor
(accessory) 6 13 8
Putting the CLAAS Autopilot into operation 6 13 9
Use in rape with left-hand side cutter 6 13 10
Malfunction, possible cause or remedy –
Slope compensation 6 14 1
0299 767 0 – BA LEXION 570 Montana 2 1 3
Contents
7 Installing and removing the cutterbar
Installing the cutterbar 7 1 1
Tilting the cutterbar from transport position 7 1 1
Adjusting the hydraulic cylinder
for transverse cutterbar control 7 1 2
Machines equipped with Auto Contour 7 1 2
Locking cutterbars and maize pickers
(Cutterbars without Auto Contour) 7 1 4
Connecting the universal drive shaft 7 1 5
Mounting the stands 7 1 6
Removing the cutterbar 7 2 1
Removing the universal coupling 7 2 1
Removing the universal drive shaft 7 2 1
Opening the cutterbar locking 7 2 2
Laying down the cutterbar on the ground 7 2 2
Placing the cutterbar on the cutterbar trailer 7 2 2
8 Operation CEBIS
Contents 8 1 1
CLAAS on-board information system
(CEBIS) 8 2 1
CEBIS Monitor and rotary switch 8 2 3
C-keys 8 2 3
Rotary switch D 8 2 3
Multifunctional handle M 8 2 3
Window sections E
(Harvest display) 8 2 3
Flagging box 8 2 3
Rotary switch D 8 2 6
Prior-to-initial operation 8 2 7
Vehicle information display 8 2 9
Harvest display 8 2 9
Yield mapping 8 2 10
Flagging 8 2 11
GPS 8 2 13
Mapping ON/OFF 8 2 13
Mapping monitor 8 2 13
Load GPS data 8 2 13
Presettings reel 8 2 15
Reel horizontal position 8 2 15
Reel speed 8 2 15
Reel height 8 2 17
Presettings front attachment 8 2 19
Clearance between snapping plates 8 2 19
Cutterbar table length 8 2 19
Cutting height settings (CAC) 8 2 21
Cutting height settings for
LEXION Montana 8 2 23
Partial width selection 8 2 25
Yield meter 8 2 26
Componentes 8 2 26
Basic setting and calibration 8 2 26
Preparation for yield measurement 8 2 27
Moisture measurement ON/OFF,
moisture correction, storage moisture 8 2 27
Quick guide to accurate measuring data 8 2 27
Yield measurement 8 2 29
Calibration factor 8 2 29
Set zero yield 8 2 29
Test-weighing 8 2 31
Weight measured 8 2 31
Moisture correction 8 2 31
Moisture mesaurement ON/OFF 8 2 31
Set zero angle 8 2 33
Storage moisture 8 2 33
Display dry yield 8 2 33
Setting combine to type of crop 8 2 35
List of threshable crops 8 2 35
Load CLAAS adjustments 8 2 35
Load own adjustments 8 2 37
Save own adjustments 8 2 37
Print machine adjustments 8 2 37
Display of CLAAS adjustments 8 2 37
Display of own adjustments 8 2 37
Cleaning by blowing 8 2 39
Recording harvest work 8 2 41
Planned work records 8 2 41
Next planned work record 8 2 41
Previous planned work record 8 2 43
New planned work record 8 2 43
Change a planned work record 8 2 43
Start / Stop 8 2 45
Completed work records 8 2 47
Next or previous completed work record 8 2 47
Restart a completed work record 8 2 47
Printer 8 2 47
Area correction 8 2 47
Daily recorder 8 2 49
Printing daily recordings 8 2 49
Clear daily recordings 8 2 49
Total recorder 8 2 51
Printing recorder summaries 8 2 51
Crop recorder 8 2 51
Copy the chip card 8 2 53
Adjustments 8 2 55
Cutterbar 8 2 55
Sensitivity CAC 8 2 55
Cutterbar upper and lower limits 8 2 57
Partial width proportions 8 2 57
Working position 8 2 57
Working width 8 2 59
Auto reel height 8 2 59
Reel end stops 8 2 59
Cutterbar automatics 8 2 61
Cutterbar table length stops 8 2 61
Fore & aft reel adjustment stops 8 2 61
Vario automatics ON/OFF 8 2 63
Snapping plate end stops 8 2 63
Speeds 8 2 65
Learning speeds 8 2 65
Learning max no-load speed 8 2 65
Belt slip limit indicator 8 2 67
Chaff spreader speed monitor 8 2 67
Returns elevator speed monitor 8 2 67
Tachometer 8 2 69
Calibration run 8 2 69
2 1 4 BA LEXION 570 Montana – 0299 767 0
Contents
Impulses/100 8 2 69
Sensitivity Autopilot 8 2 71
Zero Autopilot front attachment 8 2 71
Zero steering 8 2 71
Separation 8 2 73
Sensor test 8 2 73
Upper and lower sieve end stops 8 2 73
Upper and lower sieve adjustment 8 2 75
Returns limit 8 2 75
Set zero returns 8 2 75
CEBIS 8 2 77
Language 8 2 77
Date/Time 8 2 79
Display positive/negative 8 2 79
Measuring units 8 2 81
Version 8 2 81
Own display 8 2 83
Maintenance 8 2 85
XXh OK 8 2 85
XXh service list 8 2 85
Operator’s manual 8 2 87
Basic settings 8 2 87
Guide to adjustments 8 2 89
Problems/Remedies 8 2 89
CEBIS 8 2 91
Check list 8 2 91
Safety rules 8 2 91
Code protection 8 2 93
Engine load 8 2 95
Engine diagnosis 8 2 95
Alarms 8 2 96
Alerts 8 2 96
Problems / remedies – yield meter 8 2 97
Guide for impulses / 100 m 8 2 98
9 Operation –
basic machine
Feeder housing 9 1 1
Feeder chains 9 1 1
Threshing drum door 9 1 2
Front attachment reverser 9 1 3
Front attachment floatation springs 9 1 3
Checking the setting
of the floatation springs 9 1 3
Cutting height indicator 9 1 5
Spring pressure indicator 9 1 5
Blocking the front attachment
floatation springs
(Mechanical lock) 9 1 6
Unlocking the front attachment
floatation springs
(Mechanical lock) 9 1 6
Adjusting the drop rate
of the front attachment 9 1 6
Engaging the front attachment
(Switch console) 9 1 7
Disengaging the front attachment
(Switch console) 9 1 8
Front attachment QUICK STOP
(Switch console) 9 1 8
Disengaging the front attachment
(Multi-function handle) 9 1 9
Front attachment QUICK STOP
(Multi-function handle) 9 1 9
Threshing mechanism 9 2 1
Stone trap 9 2 1
Engaging the threshing mechanism 9 2 2
Disengaging the threshing mechanism 9 2 2
Threshing drum 9 2 3
Cleaning the threshing mechanism 9 2 3
Concave setting 9 2 4
Central concave re-adjustment 9 2 4
Re-adjusting the left-hand concave 9 2 5
Adjusting the oil pressure of the concave
adjustment accumulators 9 2 6
Basic concave setting 9 2 7
Adjusting the concave position sensor 9 2 18
Threshing drum speed 9 2 19
Drum drives 9 2 19
Two-step variable-speed drive 9 2 19
Removing and installing
the preconcave segments 9 2 20
Concave segment 9 2 21
Removing the concave segment 9 2 21
Installing the concave segment 9 2 22
Disawning 9 2 23
Unslugging the threshing drum 9 2 23
Axial rotors
LEXION 570 Montana 9 3 1
Axial rotors 9 3 1
Axial rotor variable-speed drive
(optional equipment) 9 3 1
Axial rotors step drive 9 3 2
Closing the separating grates 9 3 4
Replacing the separating grates
by dummy concaves
(optional equipment) 9 3 4
Closing the separating grates electrically
by means of flaps
(optional equipment) 9 3 4
Removing and installing the dummy
concaves / separating grates 9 3 5
Removing the dummy concaves /
separating grates 9 3 5
Installing the dummy concaves /
separating grates 9 3 8
Warning signal 9 3 8
Cleaning unit 9 4 1
Sieve pan 9 4 1
Preparation floor 9 4 1
Frogmouth sieves 9 4 2
Electric sieve adjustment 9 4 2
Removing the sieves 9 4 3
Removing the upper sieves 9 4 3
Removing the lower sieves 9 4 5
Installing the sieves 9 4 6
0299 767 0 – BA LEXION 570 Montana 2 1 5
Contents
Tightening torques of axial mountings
for the upper and lower sieves 9 4 6
Sieves – Basic setting 9 4 7
Harvesting without lower sieves 9 4 8
Covering the returns pan 9 4 8
Cleaning fan 9 4 9
Fan speed adjustment 9 4 9
Under-ventilated cleaning step 9 4 9
Adjustment of primary pre-separation
duct deflector 9 4 9
Wind board 9 4 10
Fan shutters for combining grass seed
and other special crops
(optional extra) 9 4 10
Dynamic slope compensation
(3-D cleaning system) 9 4 11
Returns 9 4 12
Inspecting the returns 9 4 12
Combine performance monitor 9 4 13
Rotor sensors 9 4 13
Sieve pan sensor 9 4 14
Grain delivery 9 5 1
Augers and auger troughs 9 5 1
Elevators 9 5 2
Grain tank 9 5 3
Safety decal (0516 275 1) 9 5 3
Grain tank extension 9 5 3
Unloading the grain tank 9 5 4
Emergency unloading grain tank cover 9 5 5
Grain tank unloading aid
(optional extra) 9 5 5
Grain tank unloading tube 9 5 6
Swinging the grain tank
unloading tube out and in 9 5 6
Grain tank unloading tube
transport position 9 5 7
Cleaning covers on the grain tank
unloading tube 9 5 8
Shear bolt for grain tank unloading 9 5 8
Engaging and disengaging
the grain tank unloading 9 5 9
Grain tank access 9 5 9
Automatic chain lubrication –
grain tank unloading
(optional extra) 9 5 10
Straw chopper
LEXION 570 Montana 9 6 1
Straw chopper 9 6 1
Before using the chopper
for the first time, check 9 6 1
Straw chopper with radial spreader 9 6 2
Putting the straw chopper into operation
(Swing radial spreader to chopping position) 9 6 3
Putting the straw chopper out of operation
(Swing radial spreader to swathing position) 9 6 4
Swinging the radial spreader
to cutterbar trailer transport position 9 6 5
Adjusting the cross blade 9 6 5
Adjusting the length of cut 9 6 6
Activating the rasp bar
(optional extra) 9 6 7
Adjusting the spreading width
of radial spreader 9 6 7
Adjusting the spreading width centre
of radial spreader 9 6 8
Straw chopper with standard spreader 9 6 9
Putting the straw chopper into operation
(Swing standard spreader to chopping position) 9 6 9
Putting the straw chopper out of operation
(Swing standard spreader to swathing position) 9 6 10
Swinging the standard spreader
to cutterbar trailer transport position 9 6 10
Adjusting the cross blade 9 6 11
Adjusting the length of cut 9 6 12
Activating the rasp bar
(optional extra) 9 6 13
Adjusting the spreading width
of standard spreader 9 6 13
Adjusting the height of standard spreader 9 6 14
Adjusting the spreading width centre
of standard spreader 9 6 15
Reducing the chopper speed 9 6 16
Chaff spreader / straw spreader
LEXION 570 Montana 9 7 1
Chaff spreader
LEXION 570 Montana 9 7 1
Folding the chaff spreader open 9 7 2
Folding the chaff spreader in
(Working position) 9 7 3
Straw spreader
LEXION 570 Montana 9 7 4
Adjusting the spreading width 9 7 4
Fitting the spreader rotors 9 7 4
Sieve chart and suggested combine adjustments
LEXION 570 Montana 9 8 1
Sieve chart
LEXION 570 Montana 9 8 1
Suggested combine adjustment
LEXION 570 Montana 9 8 2
Disawner plates 9 8 8
Concave segment 9 8 8
Malfunction, cause and / or remedy –
Basic machine 9 9 1
10 Maintenance –
basic machine
Important maintenance instructions 10 1 1
Important maintenance instructions
and safety rules 10 1 1
Maintenance schedules and lubricants charts 10 2 1
Maintenance schedules 10 2 1
Lubricants charts 10 2 4
Hydraulic system 10 3 1
Accumulators 10 3 1
Checking the oil level 10 3 1
Changing hydraulic oil 10 3 2
2 1 6 BA LEXION 570 Montana – 0299 767 0
Contents
Changing the hydraulic oil filter 10 3 3
Changing the return flow filters 10 3 3
Filling instructions when carrying out
hydraulic oil change
(Sauer 90 R 130 / 90 M 100) 10 3 4
Bleed hydraulic cylinders
for lateral levelling of cutterbar 10 3 4
Gearboxes 10 4 1
2-speed manual gearbox 10 4 1
Checking the oil level 10 4 1
Oil change 10 4 1
Differential and axle support 10 4 2
Checking the oil level 10 4 2
Oil change 10 4 2
Wheel pivots 10 4 3
Checking the oil level 10 4 3
Oil change 10 4 3
Final drives
(Planetary gear) 10 4 3
Checking the oil level 10 4 3
Oil change 10 4 3
Threshing drum reduction gearbox 10 4 4
Oil change 10 4 4
Checking the oil level 10 4 4
Transfer gearbox
(Engine) 10 4 5
Checking the oil level 10 4 5
Oil change 10 4 5
Grain tank unloading gearbox 10 4 5
Checking the oil level 10 4 5
Oil change 10 4 5
Rotor drives 10 4 6
Checking the oil level 10 4 6
Oil change 10 4 6
Lubricate ball-bearing slewing rings
of wheel pivots 10 4 7
Ball-bearing slewing rings
greasing instructions 10 4 8
Feeder housing 10 5 1
Tension feeder chains 10 5 1
Adjusting the sensor
for the cutting angle adjustment 10 5 1
Cleaning the suction blower
(accessory) 10 5 2
Drive axle 10 6 1
Adjusting the sensor
for the wheel pivots 10 6 1
Elevator chains 10 7 1
Tensioning the grain elevator chain
(Combines without yield meter) 10 7 1
Tensioning the grain elevator chain
(Combines with yield meter) 10 7 1
Tensioning the returns elevator chain 10 7 2
Drive belts / drive chains – basic machine 10 8 1
General Information 10 8 1
Drive diagram, left-hand
(LEXION 570 Montana) 10 8 2
Drive belts, drive chains 10 8 2
Drive system diagram, right-hand side
(LEXION 570 Montana) 10 8 3
Drive belts, drive chains 10 8 3
Front attachment drive 2nd step
(without variable-speed drive) –
Tensioning belt (2) 10 8 4
Front attachment drive 3rd step
(with variable-speed drive) –
Tensioning belt (3) 10 8 5
Impeller drive – Tensioning belt (5) 10 8 6
Reel hydraulic pump drive –
Tensioning belt (6) 10 8 7
Front attachment drive 1st step –
Tensioning belt (7)
(without front attachment QUICK STOP) 10 8 8
Front attachment drive 1st step –
Tensioning belt (7)
(with front attachment QUICK STOP) 10 8 9
Straw /chaff / radial spreader
hydraulic pump drive –
Tensioning belt (8) 10 8 10
Threshing mechanism drive –
Tensioning belt (9) 10 8 11
Grain tank unloading drive 1st step –
Tensioning belt (10) 10 8 12
Grain tank unloading drive 2nd step –
Removing chain (11) 10 8 14
Grain tank unloading drive 2nd step –
Installing and adjusting chain (11) 10 8 15
Straw chopper drive 1st step –
Tensioning belt (12) 10 8 16
Straw chopper drive 2nd and 3rd step –
Tensioning belts (13) and (14) 10 8 17
Sieve pan drive 1st step –
Tensioning belt (18) 10 8 19
Sieve pan drive 2nd step –
Tensioning belt (19) 10 8 20
Sieve pan drive 3rd step –
Tensioning belt (20) 10 8 21
Axial rotors step drive 2nd step –
Tensioning belt (40) 10 8 22
Axial rotors drive 1st step –
Tensioning belt (42) 10 8 23
Fan drive 1st step –
Tensioning belt (46) 10 8 24
Rotary radiator screen suction blower drive –
Tensioning belt (51) 10 8 25
Threshing drum drive –
Tensioning belt (53) 10 8 26
Accelerator drive –
Tensioning belt (54) 10 8 27
Rotary radiator screen drive –
Tensioning belt (57) 10 8 28
Cab / Air conditioner 10 9 1
Cab 10 9 1
Cleaning the filters 10 9 1
Cleaning the units located in the cab roof 10 9 1
Cleaning the cab screens 10 9 2
0299 767 0 – BA LEXION 570 Montana 2 1 7
Contents
Air conditioner 10 9 3
Cleaning the condenser 10 9 3
Checking refrigerant level 10 9 3
Replacing the filter receiver drier 10 9 4
Required refrigerant quantity –
refrigerant R 134 a 10 9 4
Oil for the compressor 10 9 4
Maintenance work before the harvest 10 9 5
Fire extinguisher 10 10 1
Compressed air system
(accessory) 10 11 1
Compressed air connections 10 11 2
Compressed-air gun and woven hose 10 11 2
Draining the accumulator 10 11 3
Pressure controller 10 11 3
Checking the safety valve 10 11 4
Straw chopper
(LEXION 570 Montana) 10 12 1
Replacing the free-swinging knives for grain 10 12 1
Removing the straw guide plate
(Radial spreader) 10 12 1
Installing the straw guide plate
(Radial spreader) 10 12 2
Removing the straw guide plate
(Standard spreader) 10 12 4
Installing the straw guide plate
(Standard spreader) 10 12 5
Removing the free-swinging knives
for grain 10 12 7
Bolting down the free-swinging knives
for grain 10 12 7
Replacing the stationary knives 10 12 9
Winter storage instructions for combines 10 13 1
11 Maintenance – engine
Important maintenance instructions 11 1 1
Important maintenance instructions
and safety rules 11 1 1
Maintenance schedules and lubricants charts 11 2 1
Maintenance schedule 11 2 1
Lubricants chart 11 2 2
Engine maintenance 11 3 1
Engine overview 11 3 1
Fuel system / engine oil 11 4 1
Fuel system 11 4 1
Fuel tank 11 4 1
Fuel shut-off tap 11 4 1
Water separator / fuel pre-filter
(Standard equipment – small version) 11 4 2
Water separator / fuel pre-filter
(optional extra, replaces fuel pre-filter Fig 4) 11 4 3
Replacing the filter cartridge 11 4 4
Bleed fuel system 11 4 4
Engine oil level check 11 4 5
Engine oil change 11 4 5
Draining used oil 11 4 6
Oil filter 11 4 7
Topping up engine oil 11 4 7
Cooling system 11 5 1
Coolant 11 5 1
Water drain plugs on the engine block 11 5 1
Radiator 11 5 2
Filling the cooling system with coolant 11 5 2
Overpressure 11 5 3
Frost protection / corrosion protection 11 5 3
Warning sign 11 5 3
Coolant temperature 11 5 3
Stopping the engine when overheated 11 5 3
Rotary chaff screen 11 5 4
Cleaning the radiator 11 5 6
Dry-type air cleaner 11 6 1
Warning device 11 6 2
Cleaning the air cleaner intake screen 11 6 2
Cleaning the air filter with plastic housing 11 6 3
Removing the air filter main cartridge 11 6 3
Cleaning the air filter main cartridge 11 6 4
Installing the air filter main cartridge 11 6 4
Cleaning the air filter with metal housing 11 6 5
Removing the air filter main cartridge 11 6 5
Cleaning the air filter main cartridge 11 6 6
Installing the air filter main cartridge 11 6 7
Safety filter cartridge 11 6 7
Removing and installing safety cartridge
(plastic housing) 11 6 8
Removing and installing safety cartridge
(metal housing) 11 6 9
Alternator 11 7 1
Cleaning the alternator 11 7 1
Electric system 11 8 1
Battery 11 8 1
Alternator 11 8 2
Engine problems, cause and / or remedy 11 9 1
Engine winter storage 11 10 1
Engine preservation 11 10 1
12 Lubrication chart
Lubricants and lubrication instructions 12 1 1
13 Index
Index 13 1 1

IMAGES PREVIEW OF THE MANUAL:

Customer Support: [email protected]

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V