CLAAS LEXION 580 – 510 Folding cutterbar 5.40 m 4.50 m Fitting and Operating Instructions Manual – PDF DOWNLOAD

Description

CLAAS LEXION 580 – 510 Folding cutterbar 5.40 m 4.50 m Fitting and Operating Instructions Manual – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

 DESCRIPTION:

CLAAS LEXION 580 – 510 Folding cutterbar 5.40 m 4.50 m Fitting and Operating Instructions Manual – PDF DOWNLOAD

INTRODUCTION

These instructions describe how to assemble and operate the folding cutterbar, and how to mount the necessary accessories on the machine. The accessory parts for the switching equipment and the additional driving lights are listed in Group 7.1. You should explain the function, operation and maintenance to the customer on the basis of these instructions. Please hand over these instructions to the customer subsequently. These instructions are only valid when used in conjunction with the combine harvester operating instructions

TABLE OF CONTENTS:

CLAAS LEXION 580 – 510 Folding cutterbar 5.40 m 4.50 m Fitting and Operating Instructions Manual – PDF DOWNLOAD

Introduction 5
Introduction 7
Table of contents 9
Table of contents 11
General Information 13
Vehicle type approval 15
Important information 17
Identification plate / Serial number 19
Safety rules 21
Safety rules 23
Safety locks 25
Feed rake safety locks 25
Reel safety lock 25
Safety decals with pictorials 27
Specifications 29
Weights / Dimensions / Safety devices 31
Additional weights 31
Prior to operation 33
Carry out prior to initial operation 35
Driving lights / Cutterbar cylinder 37
Driving lights for road use 37
Changing the driving lights (up to serial no ) 37
Changing the driving lights (from serial no ) 37
Safety lighting rail on the cutterbar 38
Removing the transport fixtures 38
Third cutterbar cylinder 38
Adjusting the cutterbar floatation springs 38
Accessory equipment 39
Additional headlights 41
Fitting the switches and the additional headlights 42
Installing the push buttons for switching 42
Mounting the additional headlights on both sides 42
Adjusting the additional headlights 46
Operation 47
Cutterbar skids 49
Adjusting the cutterbar skids 49
Cutting angle adjustment 51
Adjusting the cutting angle 51
Mounting the spacer bar 51
Mounting the coupling brackets 52
Locking the coupling lug after fitting the cutterbar 52
Unlocking the coupling lug before removing the cutterbar 53
Mounting the shaft extension 55
Mounting the extension to the intermediate drive shaft (LEXION 530 – 510) 55
Fitting the cutterbar 59
Tilting the cutterbar from the transport position 59
Installing and removing the cutterbar 60
Installing the cutterbar when folded in (cutterbar in the transport position) 60
Locking the cutterbar at top and bottom on both sides 61
Connecting the universal coupling 62
Changing the cutterbar from transport position to working position 63
Fitting the universal drive shafts LEXION MONTANA (from serial no 71300231) 68
Removing standard universal drive shafts 69
Installing the universal drive shaft for LEXION MONTANA 69
Changing the cutterbar from working position to transport position 73
Aligning the cutterbar / removing the cutterbar 79
Aligning the cutterbar (machines without Auto-Contour) 79
Removing the cutterbar 80
Adjustments on the cutterbar 81
Crop dividers 81
Outer deflector 82
Adjusting the dividers 83
Crop lifters 83
Knife 84
Removing the knife 84
Installing the knife 84
Adjusting the knife height 85
Aligning the knife clips 85
Spare knife 85
Reel 86
Adjusting the reel height 86
Fine height adjustment of the reel 86
Reel drive 87
Reel fore and aft adjustment 87
Feed auger 88
Adjusting the clearance to the cutterbar bottom plate 88
Height adjustment of the feed auger 89
Adjusting the intake finger position 90
Safety feature 91
Cutterbar skids 91
Malfunction, possible cause and/or remedy 93
Maintenance 95
Maintenance schedules and lubricants charts 97
Maintenance schedule 97
Lubricants chart 98
Transmissions 99
Knife drive transmission 99
Spring-loaded cylinders / Drive chains / Inductive sensors101
Adjusting the spring-loaded cylinders for knife drives101
Tensioning the drive chains101
Tensioning the reel drive chain102
Cleaning the guide rails of the locking cylinder102
General103
Aligning the double fingers103
Adjusting the reel limit switch103
Adjusting the locking pawl at the centre reel guide103
Cleaning the spaces of the supporting arm bearings104
Cleaning the coupling lug areas105
Suggestions for winter storage107
Lubrication chart109
Lubricants and notes111
Index117
Index119

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.m