CLAAS LEXION 580 570 LEXION 560-510 Conversion instructions Manual – PDF DOWNLOAD

Description

CLAAS LEXION 580 570 LEXION 560-510 Conversion instructions Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS LEXION 580 570 LEXION 560-510 Conversion instructions Manual – PDF DOWNLOAD

INTRODUCTION :

This manual is for the CLAAS LEXION 580, LEXION 570 and the LEXION 560 – 510 combine harvesters.
This manual shows you how to convert the combine harvester from

– grain to
grain-maize / corn cob mix (CCM)
and from
– grain-maize / corn cob mix (CCM) to grain

This manual includes only points deviating from the
Operator’s Manual.
Installation and removal of the sieves, separating
grates and concave segments can be taken from the
Operator’s Manual.
The relevant combine harvester Operator’s Manual
applies for operating the machine.
The shipping package for maize and grain equipment is listed on page 4.1.1.
The shipping package for converting the straw chopper is listed on page 6.1.1.

Each part is provided with a part number. Please consult the “Shipping Package” list for details of part specifications, for example for screws. This list includes the dimensions and the number of bolts as well as the associated parts such as nuts and contact washers. Texts and pictures in this manual apply generally to all combines covered. Notes and comments will alert you to any differences between individual types.

TABLE OF CONTENTS:

CLAAS LEXION 580 570 LEXION 560-510 Conversion instructions Manual – PDF DOWNLOAD

1 Introduction
Introduction 1 1 1
2 Contents
3 General Information
General Information 3 1 1
Important information 3 1 1
Identification of warning and danger signs 3 1 2
Intended use 3 1 2
Tightening torques 3 1 3
Bolts 3 1 3
Hydraulic fittings 3 1 4
4 Shipping Package
Shipping Package 4 1 1
Conversion from grain to grain-maize and
corn cob mix (CCM) 4 1 1
Conversion from grain-maize and
corn cob mix (CCM) to grain 4 1 3
5 Installing the maize threshing equipment
Safety Regulations 5 1 1
Additional weights 5 1 2
Feeder housing 5 2 1
Feeder chains 5 2 1
Adjusting the stops 5 2 1
Blocking the cutterbar floatation springs 5 2 1
Drum housing 5 2 1
Replacing the preconcave segments
See Operator’s Manual 5 2 1
Covering up the stone trap
(small stone trap) 5 2 1
Covering up the stone trap
(large stone trap) 5 2 2
Removing a concave segment
(small stone trap) 5 2 3
Removing a concave segment
(large stone trap) 5 2 5
Opening the disawner plates 5 2 6
Fitting threshing cylinder cover plates
(Grain-maize and corn cob mix CCM) 5 2 6
Installing the filler bars and cover plates
for the threshing drum
(corn cob mix CCM) 5 2 7
Adjusting the deflector curtain behind the impeller
LEXION 560 – 510 5 2 8
Separation / Cleaning / Unloading 5 3 1
Side risers
LEXION 560 – 510 5 3 1
CCM straw walker risers
LEXION 560 – 510 5 3 1
Changing the separating grates
LEXION 580 5 3 2
Removing and installing the separating grates 5 3 3
Unscrewing the cover plates
LEXION 580 5 3 4
Sieve selection 5 3 5
Installing web plates
(without 3-D cleaning system) 5 3 6
Removing and installing sieves and use
without finishing sieve 5 3 7
Drives 5 3 7
Adjusting the threshing drum speed range 5 3 7
6 Converting the straw chopper
Shipping Package 6 1 1
Rubber blanket shipping package 6 1 1
Free-swinging knife shipping package 6 1 2
Converting the straw chopper to maize 6 2 1
Installing the straw chopper rubber blanket
LEXION 560 – 510 6 2 1
Straw chopper settings 6 2 3
Adjusting the cross blade 6 2 4
Adjusting the knife carrier 6 2 5
Adjusting the hinged bottom plate for the rasp bar 6 2 5
Removing all fixed knives 6 2 5
Removing every other fixed knife 6 2 6
Changing the free-swinging knives 6 2 6
Bolting on the free-swinging knives (maize) 6 2 6
Apply the free-swinging knife tightening torque decal 6 2 7
Installing the rubber blanket
LEXION 580 6 2 7
Installing the guard
LEXION 570 / 560 – 510 6 2 7
Straw chopper speed 6 2 7
Converting the straw chopper to grain 6 2 7
Removing the straw chopper rubber blanket
LEXION 560 – 510 6 2 7
Bolting down the free-swinging knives for grain 6 2 8
Adjusting the rasp bar
(extra equipment) 6 2 9
Straw chopper speed 6 2 9
7 Installing the grain threshing equipment
Safety Regulations 7 1 1
Installing the grain threshing equipment 7 2 1
Feed rake conveyor 7 2 1
Adjusting the stops 7 2 1
Unlocking the cutterbar float springs 7 2 1
Drum housing 7 2 1
Exchanging the preconcave segments 7 2 1
Removing the stone trap cover plates 7 2 1
Installing the concave segment 7 2 1
Removing the filler bars 7 2 2
Adjusting the deflector curtain behind the impeller 7 2 3
Separation / Cleaning / Unloading 7 3 1
Side risers
LEXION 560 – 510 7 3 1
CCM straw walker risers
LEXION 560 – 510 7 3 1
Installing the separating grates and cover plates
See Operator’s Manual 7 3 2
2 1 2 UBA LEXION 580 – 510 – 0293 539 0
Contents
Installing the sieves
See Operator’s Manual 7 3 2
8 Index
Index 8 1 1

CLAAS LEXION 580 570 LEXION 560-510 CONVERSION INSTRUCTIONS MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V