Claas Liner 3000 Operator’s Manual – PDF DOWNLOAD

Description

Claas Liner 3000 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Liner 3000 Operator’s Manual – PDF DOWNLOAD

This operator’s manual provides information on the use, adjustment, and operation of your CLAAS rotary swather. Please note that the CLAAS rotary swather is also simply called ‘machine’ in the following chapters. Follow the advice on maintenance and service for your machine in order to obtain maximum performance and long service from the swather.

• Assembly and regular inspections of your machine should be carried out by your specialist workshop. Neglect in maintenance or service, and incorrect use will result in poor machine efficiency and loss of time.
• With correct operation and maintenance, you will benefit from the technical know-how and experience that went into the design of the machine, and your rotary swather will always work reliably.

TABLE OF CONTENTS:

Claas Liner 3000 Operator’s Manual – PDF DOWNLOAD

1 Machine description 4
2 Introduction
2 1 General information 5
2 2 Identifying the machine 6
Validity 6
Identification plate 6
3 Contents 7
4 Safety notes
4 1 Of special importance 9
Prop stand 10
4 2 Safety rules 11
Identification of warning and danger signs 11
Designated use 11
General safety and accident prevention regulations 12
Mounted machines 12
Trailed machines 12
PTO operation 12
Hydraulic system 13
Tyres 13
Maintenance 13
Noise level 14
4 3 Safety decals with pictorals 15
5 Specifications 20
6 Work to be done before first operation
6 1 Adapting the tractor 22
Electrical system 22
Holder for Terminal/CLAAS
Communicator/Operating terminal 23
Ballast weights 23
6 2 Hitching/adapting the swather 24
Adapting the hitching points 25
Adapting the universal drive shaft 25
Adapting the hydraulics 26
7 Check every time before operation 28
8 Hitching/unhitching the machine
8 1 Hitching the machine 29
Attaching to the bottom links 30
Mounting the universal drive shaft 30
Prop stand 33
Connecting the hydraulics 34
Opening the shut-off valve for the rear rotors
(only applies up to Serial No 60501857) 35
Connecting the electrical system 35
Connecting the pneumatic brake system 36
Connecting the hydraulic brake system 36
Parking brake 37
Wheel chocks 37
Connecting ISOBUS Terminal 38
Installing the operating terminal 38
8 2 Unhitching and parking the machine 39
Parking the machine at sub-zero temperatures 45
9 Driving and road transport
9 1 Transport on public roads 46
Driving licence 46
Identification plates 46
Transport on public roads 47
9 2 Transport position with ISOBUS Terminal 50
9 3 Transport position with operating terminal 53
9 4 Before transport 55
Removing the tine arms 55
Swing lighting bracket upwards 56
9 5 Before lowering into the working position 57
9 6 Working position with ISOBUS Terminal 59
9 7 Working position with operating terminal 62
9 8 Before starting field operation 64
Mounting the tine arms 64
9 9 Unloading/loading the machine 66
10 Operation – CLAAS Communicator
10 1 CLAAS Communicator 67
Overview of hardware keys 67
Overview of display 68
Soft Keys 68
Soft key “STOP” 68
Switching on/off the CLAAS Communicator 69
“Menu Selection” key 70
“Terminal” knob 70
10 2 Service menu 71
Service start menu 71
Brightness and contrast 72
Setting date and time 72
Country settings: 73
AUX 73
Software management 74
11 Operation – ISOBUS Terminal
11 1 Display 75
Overview of display 75
Title bar 75
Menu bar 76
Soft Key icons 77
Status bar 79
Data field 79
Software Version 80
Service menu/memory administration 80
11 2 Programming ISOBUS Terminal 81
Initial settings 81
Query of saved “Headland values” 84
Adjusting the working width 85
Adjusting the headland settings 85
11 3 Manual control 90
Of special importance 90
Activating manual control 91
Running gear 93
Raising/lowering the rotors 94
Contents
8 BA LINER 3000 – 0293 133 7
Contents
Setting the height of the rotor
(Rake height, additional equipment) 94
Reducing/increasing the working width 95
Switching off the manual control 95
11 4 Basic setting (initialisation) 96
Starting the initialization process 97
Basic headland settings 98
11 5 Manual operation of hydraulic system 99
12 Operation – Control terminal
12 1 Control terminal 101
Survey of keys 101
Indicator light 103
12 2 Adjustments using the control terminal 104
Adjusting the headland position 104
Basic headland setting 107
Clearance height at headland 108
12 3 Manual control 110
Of special importance 110
Activating manual control 111
Running gear 113
Raising/lowering the rotors 114
Increasing/decreasing the working width (rotor overlap) 115
Switching off the manual control 115
12 4 Basic setting (initialisation) 116
Start initialization 117
Initialization completed 120
12 5 Emergency operation 121
Functional test of angle encoders 121
12 6 Manual operation of hydraulic system 122
13 Field operation
13 1 Using the swather 124
Using the machine with ISOBUS Terminal 126
Using the machine with the control terminal 131
Changing the swath width 136
Height adjustment of rotors (rake height) 137
13 2 Accessory equipment 139
Individual raising of the front rotors
(only for swathers with control terminal) 139
Slip yoke kit (M03/0010) 140
Hydraulic couplings for tractors (R03/0020) 140
Adapter for USA road lighting (USA, R03/0500) 140
14 Trouble shooting
14 1 General faults 141
14 2 Error messages in the display
(swather with ISOBUS Terminal) 143
15 Maintenance
15 1 Important notes on maintenance 145
Spare parts 145
Screws and bolts 145
Tyres 145
Hydraulic system 146
Lubrication 146
Protective devices 146
15 2 Maintenance schedule 147
15 3 Lubricants chart 148
15 4 Drives 149
Rotor drive 149
Angle drives 155
Universal drive shaft 156
Assembling/dismantling the universal
drive shaft protection 157
15 5 Brakes 161
Pneumatic brake system 161
15 6 Adjustment work 164
Flotation springs 164
Rotor flotation 164
Adjusting the reed switch
(from Serial No : 605 0 1113 onwards) 165
Adjusting the overspeed monitor 165
Angle encoders 166
Angle sensor
(LINER 3000 with ISOBUS Terminal from serial
No : 605 0 2103) 166
Checking/adjusting the track 169
15 7 Rotor running gear 171
15 8 Tyres 172
Tyre pressure 172
Wheel change 172
15 9 Hydraulics 173
Hydraulic hoses 173
Replacing the pressure filter 173
15 10 Fixing elements 174
Threaded fasteners 174
Fasteners 175
Quick fit connector bracket securing device 175
Wear discs bracket securing device 175
Spring bracket securing device 175
15 11 Recommendations for winter storage 176
16 Lubricating chart

IMAGES PREVIEW OF THE MANUAL:

CLAAS LINER 3000 OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V