Claas MEDION 340 / 330 / 320 / 310 MEGA 360 / 350 folding cutterbar 4.50 M Fitting and Operating Instructions Manual

Description

Claas MEDION 340 / 330 / 320 / 310 MEGA 360 / 350 folding cutterbar 4.50 M Fitting and Operating Instructions Manual

DESCRIPTION:

Claas MEDION 340 / 330 / 320 / 310 MEGA 360 / 350 folding cutterbar 4.50 M Fitting and Operating Instructions Manual

INTRODUCTION

These instructions describe how to assemble and operate the 4.50 m folding cutterbar together and how to assemble the required accessories on the machine. You should explain the function, operation and maintenance to the customer on the basis of these instructions. These instructions are only valid when used in conjunction with the combine harvester operating instructions.

TABLE OF CONTENTS:

Claas MEDION 340 / 330 / 320 / 310 MEGA 360 / 350 folding cutterbar 4.50 M Fitting and Operating Instructions Manual

1 Introduction
Introduction 1 1 1
2 Table of contents
Table of contents 2 1 1
3 Preface
Attention! 3 1 1
Special note 3 2 1
Type plate / serial number 3 3 1
4 Safety rules
Safety rules 4 1 1
Identification of warning and danger signs 4 1 1
Correct use of the vehicle 4 1 1
General safety and accident prevention regulations 4 1 1
Safety Locks 4 1 3
Cylinder safety lock 4 1 3
Reel supports 4 1 4
Insert the reel supports 4 1 4
Remove the reel supports and store them away 4 1 4
Safety decals with pictorials 4 2 1
5 Specifications
Weights / Dimensions / Safety devices 5 1 1
Weights / Dimensions 5 1 1
Safety feature: 5 1 1
Setting the slipping clutch 5 1 1
6 Prior to operation
Carry out prior to initial operation 6 1 1
Driving lights for road use 6 2 1
Driving lights for road use 6 2 1
Switching over the driving lights 6 2 1
Cutterbar cylinder 6 2 1
7 Ancillary equipment
Additional weights 7 1 1
MEDION 340 – 310 / MEGA 360 / 350 7 1 1
Liquid filler for the steering axle wheels 7 1 2
Fitting the cover weights 7 1 3
Scope of components – Cover weights 7 1 3
Scope of components – steering axle weights 7 1 4
Steering axle weights 7 1 5
Fitting the steering axle weights
(Additional equipment) 7 1 5
8 Fitting and Operation
Fitting additional equipment 8 1 1
Fitting stops in the feeder housing 8 1 1
Scope of parts – Fitting 8 1 2
Fitting the stops 8 1 3
Lock the cutterbar at the sides 8 1 4
Modifying the cutterbar “Auto-Contour” for
machines without Auto-Contour 8 1 4
Fitting the switching device and the driving lights 8 1 7
Shortening the flat key
MEGA 360 / MEDION 340 8 1 11
Setting the additional headlights 8 1 12
Fitting the cutterbar 8 2 1
Tilting the cutterbar from the transport position 8 2 1
Fitting and removing the cutterbar 8 2 2
Fitting the cutterbar – folded –
(Cutterbar in the transport position) 8 2 2
Aligning the cutterbar
(Cutterbar without Auto-Contour) 8 2 3
Connecting the hydraulic hoses 8 2 4
Connecting the plug 8 2 4
Changing the cutterbar from transport position to
operating position 8 2 4
Changing the cutterbar from operating position to
transport position 8 2 8
Removing the cutterbar – folded in – 8 2 10
Fitting the cutterbar – unfolded –
(Cutterbar in operating position) 8 2 12
Connecting the universal drive shafts 8 2 13
Connecting the hydraulic hoses 8 2 14
Connecting the plug 8 2 14
Removing the cutterbar – unfolded –
(Cutterbar in operating position) 8 2 14
Adjustments to the cutterbar 8 3 1
Crop dividers 8 3 1
Crop lifters 8 3 2
Knife 8 3 3
Reel 8 3 5
Reel speed 8 3 6
Intake auger 8 3 7
Cutterbar skids 8 3 10
Malfunction 8 3 11
Cause or Remedy 8 3 11
9 Maintenance
Transmissions 9 1 1
Knife drive casing 9 1 1
Angle drive for the reel drive 9 1 2
Knife drive 9 1 2
Drive chain tensioning 9 1 2
Cleaning the guide rail of the locking cylinder 9 1 3
Adjusting the double fingers 9 1 3
10 Lubrication chart
Lubricants and notes 10 1 1
11 Index
Index 11 1 1

IMAGES PREVIEW OF THE MANUAL:

CLAAS MEDION 340 / 330 / 320 / 310 MEGA 360 / 350 FOLDING CUTTERBAR 4.50 M FITTING AND OPERATING INSTRUCTIONS MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

s.m