CLAAS Part2 General Information Maintenance Operators Manual – PDF DOWNLOAD

Description

CLAAS Part2 General Information Maintenance Operators Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS Part2 General Information Maintenance Operators Manual – PDF DOWNLOAD

Foreword

• This Part 2 of the Operator’s Manual covers General Information and Maintenance. The book should be regarded as complementary of the Part 1 of the Operator’s Manual, covering Operation, Specifications, Lubrication and provides
• practical information concerning the efficient use of your CLAAS-High Density Baler. Carefully read this manual to obtain best resuits from your baler. Follow the various hints given in this booklet regarding the correct maintenance and operation
• of the machine. Neglect in maintenance or faulty adjustments of the machine will result in inefficiency and loss of valuable time. It is therefore recommended, that an authorized CLAAS-Dealer carries out the regular maintenance operations, to ensure that your CLAAS-High Density Baler will fuction for many years and always be ready for immediate use

IMPORTANT 

• The instructions contained in t-his manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine, in order to prevent accidents. Especially the SAFETY RULES and the group PRIOR TO OPERATION in this manual should be read with the utmost care and adhered to.
• The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance, with a possible
• adverse affect on the active and/or passive operational safety of the machine and its occupational safety standards (accident prevention). CLAAS are in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment.

TABLE OF CONTENTS:

CLAAS Part2 General Information Maintenance Operators Manual – PDF DOWNLOAD

Contents General Information
Safetyfeatures 7
Baler 7
Driv e mechanism 7
Kno廿ershaft 7
Knotter 7
Needles 7
Feeders 7
Pick-up 7
Secti onal view of baler 8
Description of baler 9
Considerations before baling 9
Baler hook-up 10
Universal drive shaft 10
Long drawbar with double universal drive
shaft 11
Wide angle universal drive shaft 11
Pick-up 12
Pick-up drive 12
Feeders 12
Feeder setting 12
Feedertiming 12
Bale chamber and ram 13
Ram knife adjustment 13
Ramstop 13
Dimpled side plates 13
Baler setting 14
Knotter shaft and needle setting 14
Checking the setting of the needles relative to
theram 14
Tying mechanism 14
Path of twine 14
Needle voke brake 14
Needle setting 15
Knotter shaft brake 16
Twine finger 16
Knotter 16
Adjusting the twine tensioner 17
Maintenance
Tying mechanism 20
Chains 20
Angle drive gearbox 20
Problems and remedy, general 21
Problems and remedy, knotter 22
Wi inter storage instructions 24
IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.M