CLAAS QUADRANT 1200 OPERATOR’S MANUAL – PDF DOWNLOAD
DESCRIPTION:
CLAAS QUADRANT 1200 OPERATOR’S MANUAL – PDF DOWNLOAD
Introduction
- This manual contains information regarding the use, setting and operation of the big square baler CLAAS QUADRANT 1200. Provided you follow the advice on the care and servicing of your machine you will be rewarded with reliable operating efficiency and long service from your square baler.
- We recommend that you allow your local CLAAS Dealer to overhaul and service your square baler immediately after the season, adhering to the recommended winter service schedule contained in this manual.
- Omissions of parts of a service, or incorrect adjustments lead to a drop in performance and cost valuable time. By correct servicing and operation you can make full use of the latest technical knowledge and experience in mechanised handling of fodders and straw with which your machine has been designed, and thereby insure reliability of your CLAAS QUADRANT 1200.
Important note
- The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine in order to prevent accidents.
- Especially the SAFETY RULES in this manual should be read with the utmost care an adhered to. The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance.
- with a possible adverse affect on the active and/or passive operational safety of the machine and its occu- pational safety standards (accident prevention).
- CLAAS is in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipan Technical data, dimensions and weights are given as an indication only. Following the policy of CLAAS to improve their products as technical developments continue, CLAAS reserve the right to make alterations. Responsibility for errors or omissions not accepted. Front, rear, righthand and left-hand always reler to the machine as seen in the direction of forward travel.
TABLE OF CONTENTS:
CLAAS QUADRANT 1200 OPERATOR’S MANUAL – PDF DOWNLOAD
Contents
Important note
Identification plate
Baler serial number
Safety rules
Safety decals with pictorials
1 Specifications
CLAAS QUADRANT 1200
Safety features
Description and function
Basic components of the machine
2 Before Operation
Before using the machine the first time carry out
these operations
Baler hook-up
Drawbar
Universal drawbar for top and bottom hitching
Adjusting the hitch eye
Grease hitch eye
Drawbar to hitch the baler to the tractor’s
swinging drawbar
Double universal drive shaft
Fitting the universal drive shaft to the machine
Fitting the universal drive shaft to the tractor
Attaching the safety wire rope
Unhitching the baler
Jackstand
Electrical system
Hydraulic system
Air-operated braking system
Connecting the air hoses
Disconnecting the air hoses
Hydraulic-operated braking system
Parking brake
Ladder
Wheel chocks
Transporting the square big baler
Cleaning fan
12 volt socket
Before transport(ng the baler
3 Operation
Pick-up
Swath spreader
Adjusting the throw of the swath spreader
Adjusting the pick-up working height
Work in straw
Operation in hay and crops for silage
Pick-up crop guard
Short crop baffle
Baling
Adjusting the bale chute
Bale density control
Clearing the bale chamber
Bale ejector
Raising the bale chamber bottom
Bale counter
Shear bolts
Main drive
Knotter shaft drive
Suggested lever to be made for turning
the knotter shaft
Feeder drive
Lower feeder and pick-up drive
Tying
Twine boxes
Threading twine
Adjusting twine eyes
Electrical twine monitor
Setting the lengths of the bales
Starting work
Guide to bale density settings
Drive Line Load Control (DLC)
After work
Problem, Cause or remedy
4 Maintenance
Important maintenance instructions
Maintenance chart
Lubrication chart
Brake system
Air-operated brakes
Draining the air reservoir
Brake cylinder
Brake linings
Drives
Main gearbox
Upper angle drive gearbox
Lower angle drive gearbox
Hydraulic system
Adjusting the tension of the drive chains
Tensioning the tension spring for the
pick-up drive
Tensioning the drive chain for the feed auger
Adjusting the spring-loaded cylinders
of the pick-up
Drive to lower feeder – pick-up
Adjusting the springs of the twine retainers
Adjusting the springs of the knotter hooks
Knotter shaft brake
Adjusting the knotter pinion for correct play
Needle carrier brakes
Upper feeder
Adjusting the feeder drive locking pawl
Cleaning fan
Basic setting
Setting the drives to the timing marks
Setting the lower feeder
Tying mechanism
Adjusting knotter shaft and needles
Checking the needle position relative to the ram
Ram stop
Twine fingers
Winter storage instructions
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.M
