CLAAS QUANTUM 6800 S / P 5500 S-18 / P-18 5500 S-16 / P-16 4500 S / P Automatic filling MODIFICATION INSTRUCTIONS MANUAL_DE_EN_NL

Description

CLAAS QUANTUM 6800 S / P 5500 S-18 / P-18 5500 S-16 / P-16 4500 S / P Automatic filling MODIFICATION INSTRUCTIONS MANUAL_DE_EN_NL

DESCRIPTION:

CLAAS QUANTUM 6800 S / P 5500 S-18 / P-18 5500 S-16 / P-16 4500 S / P Automatic filling MODIFICATION INSTRUCTIONS MANUAL_DE_EN_NL

INTRODUCTION

This manual describes the safe and time-saving method of modification with the conversion kit part no. 973 921.0. Carefully read and understand these instructions before starting work! Observe especially the section “General instructions”. The following machines can be modified

Self-loading forage wagon:
QUANTUM 6800 S / P
QUANTUM 5500 S / P
QUANTUM 4500 S / P

The shipping package is listed on page 4.1 and page 4.2 . Make sure that the conversion kit is complete before starting work. The “Package list” can also be used as a supplement to the spare parts list. Dispose of old parts that are not required for the assembly in an environmentally correct manner.

General instructions
OF Special Importance

• The instructions set forth in this manual must be read carefully and followed by all persons concerned with the operation, maintenance, repair or inspection of this machine in order to prevent accidents.
• Read and understand especially the “General instructions” section in your operator’s manual and observe the pertinent accident prevention regulations of your country. Before starting work make sure that all necessary tools and devices are at hand. Make a comparison between the present type of machine/ implement, the list in section “Package list” and the
• delivered kit. For the specification of parts, e.g. screws, see the “Package list” list. In this list every mounting part has an item number
• . Further details regarding these parts are the spare parts no., the designation, dimension, DIN and quantity. As a guideline, the existent parts in the installation instructions are marked with letters, while new parts are marked with numbers (item numbers).
• Texts and figures are formulated neutrally, as far as possible. The differences between the models are pointed out by notes in the text.
• Technical specifications, dimensions and weights are understood with the usual tolerances. IMPORTANT: Front, rear, right and left refer to the direction of forward travel

TABLE OF CONTENTS:

CLAAS QUANTUM 6800 S / P 5500 S-18 / P-18 5500 S-16 / P-16 4500 S / P Automatic filling MODIFICATION INSTRUCTIONS MANUAL_DE_EN_NL

1 Contents
2 Introduction
Introduction 21
3 General instructions
Of special importance 31
Identification of warnings and dangers 32
Safety decals with warning symbols 32
Designated use 32
4 Package list
5 Converting the automatic filling device
QUANTUM 6800 S / 5500 S / 4500 S
QUANTUM 6800 P / 5500 P / 4500 P 51
Check and observe the following before putting into operation 54
IMAGES PREVIEW OF THE MANUAL:

CLAAS QUANTUM 6800 S / P 5500 S-18 / P-18 5500 S-16 / P-16 4500 S / P AUTOMATIC FILLING MODIFICATION INSTRUCTIONS MANUAL_DE_EN_NL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M