CLAAS RU 450 RU 450 Xtra Wear part set Fitting Instructions Manual_DE_EN_FR_IT_ES – PDF DOWNLOAD

Description

CLAAS RU 450 RU 450 Xtra Wear part set Fitting Instructions Manual_DE_EN_FR_IT_ES – PDF DOWNLOAD

DESCRIPTION:

CLAAS RU 450 RU 450 Xtra Wear part set Fitting Instructions Manual_DE_EN_FR_IT_ES – PDF DOWNLOAD

INTRODUCTION

This manual describes the safe and time-saving method of mounting with the mounting kit, part no. 932 611.0 (RU 450 / XTRA). Please read this manual thoroughly before starting work! Pay particular attention to the »General instructions « section. The following machines can be converted: CLAAS maize header: RU 450 / XTRA from serial – no. 660 0 3127 The shipping package is listed on page 4.1. Before starting work make sure that the mounting kit is complete. The “Shipping package” list is also considered a supplement to the spare parts list.

General instructions
OF SPECIAL IMPORTANCE

• The instructions set forth in this manual must be read carefully and followed by all persons concerned with the operation, maintenance, repair or inspection of this machine/front attachment in order to prevent accidents. Read and understand especially the »General instructions« section and the chapter on »Safety« in your operator’s manual.
• Observe the pertinent accident prevention regulations of your country. Clean the machine before starting work. Welding and grinding work on the machine may cause fire if accumulated vegetation, grease and dirt is not removed. Before starting work make sure that all necessary tools and devices are at hand.
• Make a comparison between the present type of machine/ implement, the list in section “Shipping package” and the delivered kit. For the specification of parts, e.g. screws, see the “Shipping package”.In this list every mounting part has an item number.
• Further details regarding these parts are the part no., the quantity, the dimensions, the ISO/DIN and the use. As a guideline, the existent parts in the installation instructions are marked with letters, while new parts are marked with numbers (item numbers).
• Texts and figures are formulated neutrally, as far as possible. The differences between the models are pointed out by notes in the text. Technical specifications, dimensions and weights are understood with the usual tolerances.
• IMPORTANT: Front, rear, right and left refer to the direction of forward travel.

TABLE OF CONTENTS:

CLAAS RU 450 RU 450 Xtra Wear part set Fitting Instructions Manual_DE_EN_FR_IT_ES – PDF DOWNLOAD

1 Introduction
Introduction 11
2 Table of contents
3 General instructions
Of special importance 31
Identification of warnings and dangers 31
Designated use 32
Safety decals with warning symbols 32
General safety instructions 32
4 Shipping package
Shipping package for RU 450 / XTRA 41
Wear parts set 932 6110 41
5 Disassembly
Remove centre feed and cutting disc 51
6 Welding wear parts set
Welding right channel 61
Welding left channel 62
Welding troughs 63
7 Assembly
Mount centre feed and cutting disc 71
Check and observe the following before putting into operation 74
IMAGES PREVIEW OF THE MANUAL:

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M