CLAAS TARGO K-SERIE Reduced Speed Fan Conversion Instructions Manual_GB_DE_FR

Description

CLAAS TARGO K-SERIE Reduced Speed Fan Conversion Instructions Manual_GB_DE_FR

DESCRIPTION:

CLAAS TARGO K-SERIE Reduced Speed Fan Conversion Instructions Manual_GB_DE_FR

INTRODUCTION

These instructions describe the safe and timesaving work sequence for conversion of the reduced speed fan. The teleporter TARGO K SERIES can be retrofitted with the conversion kit parts no. 349 332.0, from the following machine number range: 51200020 to 51200471. The standard mounting time is approx. 4 man hours. See page 4.1 for the shipping package. Observe the »Safety Rules« in the applicable operator’s manual

General information
IMPORTANT

• The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine/ front attachment in order to prevent accidents.
• Especially the »Safety Rules« in the operator’s manual should be read with the utmost care and adhered to. In addition, please also observe the accident prevention regulations that apply for your own country. Before commencing with the job, ensure that all the tools and service aids are available.
• Compare existing machine type/front attachment type with the list in the chapter »Shipping Package« and the parts kit supplied. The specification of the components, e.g. bolts, is shown on the shipping package. The shipping package shows the position number (pos. no.) of the components.
• Parts such as nuts and contact washers do not have a position number but belong to the bolt listed above which does have a position number. Additional part specifications are the part no., description, measurements, DIN and the quantity. In order to help with the assembly, existing components in the instructions are identified with letters, whereas new parts have been identified with a number (position number).
• Texts and pictures apply, in general, to all machine types covered by this book and the information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text. Technical data, dimensions and weights are given as an indication only.
• CLAAS reserve the right to make changes subsequently as technical developments continue. Responsibility for errors or omissions not accepted. Front, rear, right and left refer to the direction of forward travel.
  TABLE OF CONTENTS:

CLAAS TARGO K-SERIE Reduced Speed Fan Conversion Instructions Manual_GB_DE_FR

1 Introduction
Introduction 11
2 Contents
Contents 21
3 General
information
Important 31
Identification of warnings and danger signs 32
Correct use 32
4 Shipping Package
Shipping Package 41
Conversion kit 349 3320 41
5 Conversion
Conversing the reduced speed fan 51
Preparing the installation 51
Removing the fan 51
Creating vacuum in the hydraulic oil tank 53
Disassembling the fan 54
Assembling the fan 55
Exchanging the hydraulic pump 56
Installing the fan 57
Preparing and performing the test run 59
IMAGES PREVIEW OF THE MANUAL:

CLAAS TARGO K-SERIE REDUCED SPEED FAN CONVERSION INSTRUCTIONS MANUAL_GB_DE_FR:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.M