CLAAS TARGO K SERIES operator’s Manual – PDF DOWNLOAD
$89.95 Original price was: $89.95.$25.95Current price is: $25.95.
CLAAS TARGO K SERIES operator’s Manual – PDF DOWNLOAD
Description
CLAAS TARGO K SERIES operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
CLAAS TARGO K SERIES operator’s Manual – PDF DOWNLOAD
Introduction to the Handbook
The contents of the Operators Handbook are intended as a guide to the operation and servicing of the CLAAS
telehandler range. The general method of operation of all these machines is the same. Any individual
differences in the specification or operation are detailed separately.
Note:
The procedures and illustrations contained in this manual refers to all models. Some illustrations may differ
slightly from the actual machine
This handbook is not a training manual. It is designed as a guide to the machine’s controls and working
capacities and general maintenance only. It must not be removed from the machine and should be kept clean
and in good condition. Additional copies of the handbook can be obtained from your CLAAS dealer.
Only trained operators should use this machine. CLAAS strongly recommends that anyone who is
responsible for the operation and servicing of this machine be fully trained in its safe operation.
If you have any doubts about any aspects of the machine’s capability or servicing procedures, you must
consult CLAAS through your local CLAAS dealer.
Throughout this handbook and on the machine there are safety notes. Each note starts with a single word. The
meaning of these single words are explained below.
TABLE OF CONTENTS:
CLAAS TARGO K SERIES operator’s Manual – PDF DOWNLOAD
GENERAL DESCRIPTION
INTRODUCTION
Introduction to the handbook
Running in
Machine identification
Safety section
Safety messages
General hazards
SECTION 1
Before driving the machine – Safety warnings 1 1
Entering the cab 1 2
Emergency exit 1 3
Adjusting the seat 1 4
Adjusting the steering column and joystick mounting 1 5
Cab layout and Controls 1 6
Instruments and warning lights 1 9
Facia mounted switches 1 11
Steering column switches 1 12
Side console switches 1 13
Boom and carriage controls 1 14
Auxiliary controls 1 15
Steering modes 1 16
Starting and Stopping the engine 1 17
Engaging gears – APC Powershift 1 19
Engaging gears – powershift 1 22
Driving the machine 1 23
Reversible cooling fan 1 25
Working the Telehandler 1 28
Longitudinal Stability Indicator 1 28
Examples of instability situations 1 30
Lifting envelope 1 31
Approaching a load – Working with pallet forks 1 33
Picking up a load – Working with pallet forks 1 34
Placing a load – Working with pallet forks 1 36
Lifting unpalletised loads 1 37
Travelling 1 38
Transporting the machine 1 39
SECTION 2
Attachments – fitting and removal 2 1
Hydraulically operated attachments 2 3
Working with front end attachments 2 4
Automatic trailer pick-up hitch (Auto-hitch) 2 5
Manual trailer pick-up 2 7
Extension jibs and crane hooks 2 8
CONTENTS
SECTION 3
Safety Warnings 3 1
Access to service checkpoints 3 2
Service schedule 3 3
Grease points 3 6
Wheels and tyres 3 7
Engine oil level 3 8
Engine oil and filter 3 9
Cooling system 3 10
Fuel system 3 14
Air cleaner 3 18
Engine 3 19
Fan drive system 3 20
Transmission and Transfer Box 3 21
Axles 3 24
Hydraulics 3 25
Battery 3 28
Auto-hitch 3 29
Rockinger hitch 3 29
Windscreen washer bottle 3 29
Cab and engine compartment 3 30
SECTION 4
Machine specifications 4 1
Adjustments 4 2
Lubricants and fluid specifications 4 2
Capacities – fluid 4 3
Pressures 4 3
Dimensions – machines fitted with standard tyres 4 4
Fusebox 4 5
CONTENTS
CONTENTS
SECTION 4 (continued)
Sheet 4 – Head/side lights, fog lights, number plate lights, head flasher 4 25
Sheet 4A – Head/side lights, fog lights, number plate lights, head flash 4 26
Sheet 5 – Turn indicators, reverse lamps, steer sensors, top lights, radio 4 27
Sheet 6 – Inst display, sensor switches, fan motor, aircon, interior light, beacon,
fuel sender, fan reverse, hyd temp 4 28
Sheet 7 – APC 50 with ign controlled APC bat feed, screened sensor cable, p/brake link 4 29
Sheet 7A – Non-APc, correct p/brake and trans dump, no p/brake controller, cicuit link 4 30
CLAAS TARGO K SERIES OPERATOR’S MANUAL – PDF DOWNLOAD:
IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.V
What Our Customers Say
🌟 Related Products
Discover more professional manuals for your equipment



Claas Dominator 100-105 Spare Parts List Manual - PDF DOWNLOAD
