Claas Tractor Atles 946 Use & Maintenance Manual – PDF DOWNLOAD

Description

Claas Tractor Atles 946 Use & Maintenance Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Tractor Atles 946 Use & Maintenance Manual – PDF DOWNLOAD

Appropriate use :

This tractor has been designed to be used exclusively for normal agricultural work (appropriate use). Any use other than that defined above will be considered as inappropriate and will release the manufacturer from any liability in the event of damage or injury; the user alone will bear the risks resulting from such misuse.

• Appropriate use also supposes the observance of the operating, maintenance and repair regulations laid down by the manufacturer. The tractor must be used, maintained and repaired only by persons with a thorough knowledge of the vehicle and aware of the possible risks.
• Specific accident prevention instructions must be observed as well as general rules concerning technical safety, health and safety regulations and the highway code. The manufacturer declines all responsibility for any damage resulting from any modification made to the tractor without their approval.

TABLE OF CONTENTS:

Claas Tractor Atles 946 Use & Maintenance Manual – PDF DOWNLOAD

A – IDENTIFICATION – CERTIFICATION – SAFETY
IDENTIFICATION A 2
CERTIFICATION A 2
SAFETY A 3
FOREWORD A 3
PRECAUTIONS BEFORE STARTING A 3
CONDITION OF THE TRACTOR A 4
ADJUSTMENT OR MAINTENANCE – REPAIRS A 5
ROAD USE – USE FOR TRANSPORT A 8
OPERATION A 9
TOXIC PRODUCTS A 11
AIR CONDITIONING A 12
SAFETY STRUCTURE A 12
ENVIRONMENTAL SAFETY A 12
SAFETY STICKERS WITH WARNING PICTOGRAMS A 13
B – CAB
INSTRUMENTS AND CONTROLS (DRIVING POSITION) B 2
INSTRUMENTS AND CONTROLS (PANEL) B 3
WARNING AND INDICATOR LIGHTS B 4
WARNINGS B 5
RED WARNING LIGHTS “PRIMARY ALARMS” B 5
ORANGE WARNING LIGHTS “SECONDARY ALARMS” B 6
INSTRUMENTS B 8
DIGITAL DISPLAYS B 9
“FORWARD SPEED” COMPUTER CALIBRATION PROCEDURE B 10
CONTROLS AND ACCESSORIES IN THE CAB ROOF B 11
RIGHT SIDE B 11
LEFT SIDE B 11
RADIO B 11
CAB LIGHT AND SPOT B 11
DIGITAL CLOCK B 11
OTHER CONTROLS AND ACCESSORIES B 12
ADJUSTABLE STEERING COLUMN B 12
SCREEN WIPER AND WASHER B 12
REAR WINDOW WIPER B 12
TOOLBOX B 13
HITCH MOUNTING B 13
PROVISION FOR THE INSTALLATION OF A CONTROL CASING IN THE CAB B 13
STORAGE BIN B 14
CIGAR LIGHTER AND ASHTRAY B 14
TELESCOPIC REAR-VIEW MIRRORS B 14
Atles 946 – 07 2008 – GB
DRIVER’S SEAT B 15
COMFORT SEAT B 15
PNEUMATIC SEAT B 16
PASSENGER SEAT B 16
SUSPENSION ADJUSTMENT B 17
NATURAL VENTILATION B 18
SUN BLIND B 18
HEATING – VENTILATION – COOLING SYSTEM B 19
CONTROLS B 19
AIR VENTS B 19
THE SYSTEM PROVIDES B 19
C – ELECTRICAL SYSTEM
CHARACTERISTICS C 2
LIGHTS C 2
TOWING SOCKET C 2
LIGHTING – INDICATORS C 3
BATTERY MASTER SWITCH C 5
KEY-OPERATED IGNITION SWITCH (G) C 5
FUSES AND RELAYS C 5
D – ENGINE
CHARACTERISTICS D 2
OPERATIONS BEFORE START C 3
STARTING THE ENGINE D 4
COOLANT HEATER D 4
STOPPING THE ENGINE D 5
OPERATION D 6
GENERAL D 6
FUEL D 7
BLEEDING AIR FROM THE INJECTION SYSTEM D 8
E – TRANSMISSION
USE OF THE GEAR BOX E 3
SWITCHING ON AND SELF-TEST E 3
CLUTCHLESS REVERSER LEVER E 3
CHANGING GEARS UNDER TORQUE E 4
USE OF THE APPROACH PEDAL (G) E 5
USE OF THE CRAWLER RANGE E 5
TRACTOR FORWARD MOVEMENT E 6
CHOICE OF A DIFFERENT STARTING GEAR FROM THE ONE PROPOSED BY THE DISPLAY PANEL E 6
USE OF THE MANOEUVRE RATIO E 7
“SPEED MATCHING” E 8
MALFUNCTIONS E 8
PLACING THE GEAR BOX IN NEUTRAL E 9
SUMMARY OF THE FUNCTIONS PROPOSED BY THE GEAR BOX E 10
USE OF THE PARK LOCK E 10
Atles 946 – 07 2008 – GB
DIFFERENTIAL LOCK E 11
ELECTRONIC MANAGEMENT OF THE DIFFERENTIAL LOCK E 11
BRAKE PEDALS E 12
TRAILER BRAKE E 12
REAR POWER TAKE-OFF E 13
CHARACTERISTICS F 13
REAR POWER TAKE-OFF ENGAGEMENT CONTROL F 13
SELECTION OF PTO SPEEDS F 14
POWER TAKE-OFF END FITTING F 14
CONNECTING IMPLEMENTS TO THE POWER TAKE-OFF F 15
STATIONARY WORKING F 16
TOWING THE TRACTOR E 16
F – FRONT AXLE
CHARACTERISTICS F 2
FRONT AXLE ENGAGEMENT F 3
OPERATING MODE F 3
DIFFERENTIAL LOCKING F 4
G – HYDRAULICS – REAR LINKAGE AND HITCH
CHARACTERISTICS G 2
LINKAGE G 2
HYDRAULIC SYSTEM G 2
HITCH G 2
REAR LIFTING TCE 25 (ELECTRONIC TRACTO CONTROL) G 3
DESCRIPTION OF CONTROL PANEL G 3
MODE SELECTOR G 4
USING THE LINKAGE G 5
POSITION CONTROL G 5
FORCE CONTROL G 6
UPPER LIMIT G 7
LOWERING SPEED G 7
EXTERNAL CONTROL BUTTONS G 8
TRANSPORT DAMPER G 8
ACTIVE WHEEL SLIP MANAGEMENT (TCE 25) G 9
AUXILIARY SPOOL VALVES G 10
ELECTROPILOT G 12
ACTIVATION G 12
JOYSTICK OPERATION G 12
FLOW ADJUSTMENTS G 13
CONTINUOUS FEED G 14
CONTROLS IN THE EVENT OF BREAKDOWNS G 14
INSTRUCTIONS FOR ADJUSTING THE REAR HITCH G 15
INFLUENCE OF HITCH GEOMETRY ON LIFTING CAPACITY G 15
ADJUSTING THE LIFTING RODS G 15
ADJUSTMENT OF THE UPPER ROD G 16
ADJUSTING THE STABILISERS G 16
AUTOMATIC HITCHING G 17
AUTOMATIC HOOKS G 17
DRAW BAR COUPLINGS G 17
Atles 946 – 07 2008 – GB
H – FRONT POWER TAKEOFF, LINKAGE AND FRONT COUPLING
CHARACTERISTICS H 2
FRONT LINKAGE H 2
FRONT POWER TAKE-OFF H 2
USE OF FRONT LIFT H 3
HITCH H 4
USING THE FRONT POWER TAKEOFF H 5
I – ON BOARD COMPUTER
ON-BOARD COMPUTER (INFOTRAC) I 2
DESCRIPTION I 2
OPERATION I 4
SETTING UP AN AUTOTEST I 4
PARTIAL EVENT COUNTER FUNCTION I 4
TOTAL EVENT COUNTER FUNCTION I 4
PARTIAL DISTANCE COVERED FUNCTION I 5
TOTAL DISTANCE COVERED FUNCTION I 5
PARTIAL SURFACE WORKED FUNCTION I 5
TOTAL WORKED SURFACE FUNCTION I 6
PARTIAL WORKING TIME FUNCTION I 6
TOTAL WORK TIME FUNCTION I 6
INSTANTANEOUS HOURLY WORKED SURFACE FUNCTION I 7
OUTSIDE TEMPERATURE FUNCTION I 7
PROGRAMMING THE IMPLEMENT WIDTH I 7
INFOTRAC CALIBRATION PROCEDURE “OPERATING SPEED” I 8
J – WHEELS AND TYRES
GENERAL J 2
REPLACEMENT OF TYRES, USE OF DIFFERENT TYPES OF TYRE J 2
SPECIAL CASE OF TRACTORS WITH FOUR WHEEL DRIVE J 2
INFLATION PRESSURE J 2
OPERATING ON SOFT GROUND (TO IMPROVE GRIP) J 2
OPERATING ON HARD GROUND (ON THE ROAD, TOWING, ETC ) J 2
FRONT AND REAR AXLE CHARACTERISTICS J 4
TABLES OF FRONT TRACKS J 5
TABLES OF REAR TRACKS J 7
SETTING THE TRACK J 8
ADJUSTING THE TRACK WITH SMOOTH SHAFT REAR AXLE J 9
FRONT AXLE STEERING LOCK STOPS J 9
TWIN WHEELS J 10
USING DEEP-WORKING IMPLEMENTS J 11
K – DIMENSIONS, WEIGHTS, CAPACITIES AND BALLAST
DIMENSIONS AND WEIGHTS K 2
CAPACITIES K 3
BALLASTS K 4
BALLAST ON THE FRONT OF THE TRACTOR K 4
Atles 946 – 07 2008 – GB
L – MAINTENANCE
GENERAL L 2
ADVICE L 2
GENERAL CLEANING L 2
HIGH-PRESSURE CLEANING SYSTEMS L 2
ROUTINE MAINTENANCE L 2
TOUCHING UP PAINTWORK L 2
WELDING L 2
FAILURES OR MALFUNCTIONS L 2
DECREASE IN FLUID LEVEL L 2
QUANTITY AND TYPE OF OIL L 2
GREASE QUALITY L 2
FREQUENCY L 3
SUMMARY TABLE L 3
MAINTENANCE LOGBOOK L 22
OPERATIONS TO BE CARRIED OUT EVERY 500 H L 22
OPERATIONS TO BE CARRIED OUT EVERY 1000 H L 23
OPERATIONS TO BE CARRIED OUT EVERY 1500 H L 23
OPERATIONS TO BE CARRIED OUT EVERY 2000 H L 24
M – OPERATIONS THAT ARE MANDATORY UNDER THE GUARANTEE
OPERATIONS MANDATORY UNDER THE TERMS OF THE CONTRACTUAL GUARANTEE M 2
PRE-DELIVERY INSPECTION – HANDING OVER TO THE CUSTOMER M 2
MANDATORY ROUTINE MAINTENANCE M 2
MANDATORY SERVICE AFTER FIRST 100 HOURS M 3
MANDATORY SERVICE AFTER THE FIRST 500 HOURS OR BETWEEN THE 8TH AND 10TH MONTH M 4

IMAGES PREVIEW OF THE MANUAL:

CLAAS TRACTOR ATLES 946 USE & MAINTENANCE MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V