CLAAS TUCANO 480 / 470 Straw chopper for maize / grain Conversion instructions and operator’s manual_DE_EN_FR_IT_ES_RU – PDF DOWNLOAD

Description

CLAAS TUCANO 480 / 470 Straw chopper for maize / grain Conversion instructions and operator’s manual_DE_EN_FR_IT_ES_RU – PDF DOWNLOAD

DESCRIPTION:

CLAAS TUCANO 480 / 470 Straw chopper for maize / grain Conversion instructions and operator’s manual_DE_EN_FR_IT_ES_RU – PDF DOWNLOAD

Introduction
1.1 General Information
1.1.1 How to use this manual

• The present fitting and operating instructions are primarily intended for the machine operator and provide information about how to fit and operate the product. Moreover, they describe how to fit the parts listed in the shipping package chapter. In the Installation chapter, existing parts are marked by letters and new parts by numbers to provide better orientation.
• Provided you follow the advice on care and servicing of your product, you will be rewarded with reliable and long service from your product. Please have the regular inspections carried out by your CLAAS specialist workshop. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time. By correct
• operation and servicing you can make full use of our sound experience and of the latest technical knowledge with which your product has been designed, thus ensuring reliability of your product. Texts and figures Pictures and graphics are
• neutral. Differences are pointed out by notes beneath the figure. Texts are short and not machine-specific as far as possible. Differences are pointed out by intermediate headings. Different types of texts can easily be distinguished from one another by their formats. The following formats are distinguished:

Safety
2.1 General Information

Before putting the machine into operation, read and follow the Operator’s manual and the safety instructions!

2.1.1 Important information

• The information contained in this manual must be read and observed by all persons who carry out and check this installation process in order to avoid hazards. Read in particular the “Safety” sections in the Operator’s manuals of the machine and of the front attachment. The use of spare parts, accessories and ancillary equipment not originally
• manufactured by CLAAS and not checked and approved by CLAAS can change the specified design characteristics of the CLAAS machine or can detract from its functional performance, with a possible adverse effect on the active and/or passive
• operational safety of the machine and its occupational safety standards (accident prevention). CLAAS are in no way liable for any damage caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment

TABLE OF CONTENTS:

CLAAS TUCANO 480 / 470 Straw chopper for maize / grain Conversion instructions and operator’s manual_DE_EN_FR_IT_ES_RU – PDF DOWNLOAD

1 Introduction
11 General Information 42
111 How to use this manual 42
112 Specifications 44
113 Validity of manual 44
114 Straw chopper overview 44
2 Safety
21 General Information 45
211 Important information 45
212 Identification of warning and danger signs 46
3 Package list
31 Conversion from grain to maize 47
311 Supplementary kit 47
4 Conversion
41 General Information 49
411 General warnings 49
42 Converting the straw chopper to maize 50
421 Checking the shipping package 50
422 Removing the straw guide plate 50
423 Unscrewing the free-swinging knives 50
424 Bolting down the free-swinging knives 50
425 Setting the cross blade back 50
426 Swinging back the stationary knives 50
427 Fitting the cover 51
428 Installing the straw guide plate 53
429 Changing the straw chopper drive speed (maize) 54
4210 Prepare and carry out a test run 59
43 Converting the straw chopper to grain 60
431 Changing the straw chopper drive speed (grain) 60
432 Removing the straw guide plate 65
433 Unscrewing the free-swinging knives 65
434 Bolting down the free-swinging knives 65
435 Setting the cross blade forward 65
436 Setting the stationary knives forward 65
437 Cover (use) 65
438 Installing the straw guide plate 65
439 Prepare and carry out a test run 66
5 Fieldwork settings
51 General Information 67
511 General warnings 67
52 Crop receptacle / straw receptacle 68
521 Removing the straw guide plate 68
522 Installing the straw guide plate 69
523 Adjusting the cross blade 70
524 Adjusting the stationary knives 71
IMAGES PREVIEW OF THE MANUAL:

CLAAS TUCANO 480 / 470 STRAW CHOPPER FOR MAIZE / GRAIN CONVERSION INSTRUCTIONS AND OPERATOR’S MANUAL_DE_EN_FR_IT_ES_RU – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M