Claas Variant 180 RC Operator’s Manual – PDF DOWNLOAD

Description

Claas Variant 180 RC Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Variant 180 RC Operator’s Manual – PDF DOWNLOAD

Introduction:

This manual contains information regarding the use, setting and operation of the CLAAS VARIANT 180 RC round baler. Provided you follow the advice on the care and servicing of your machine, you will be rewarded with reliable operating efficiency and long service from your round baler.

• We recommend that you allow your local CLAAS Dealer to overhaul and service your round baler immediately after the season, adhering to the recommended winter service schedule contained in this manual.
• Omissions of parts of a service, or incorrect adjustments lead to a drop in performance and cost valuable time. Correct operation and careful maintenance will ensure that you benefit from the latest crop handling know-how and experience reflected in the design of your round baler and afford reliable service at all times.

TABLE OF CONTENTS:

Claas Variant 180 RC Operator’s Manual – PDF DOWNLOAD

Important
Safety rules
Identification plate
Baler serial number
Safety decals with pictorials
1 Specifications
CLMS VARIANT 180 RC
Basic components of machine
Description and function
Transmission of power
Pick-up
Cutting unit
Bale chamber
Wrapping
Bale transport
Storage of round bales
2 Prior to operation
Before using the machine, check and observe
the following 2 1
Baler hook-up 2 2
Connecting the universal drive shaft to the baler 2 2
Hook-up to the swinging drawbar 2 3
Greasing the hitch eye 2 4
Connecting the universal drive shaft
to the tractor 2 4
Hook-up to top-fitted tow jaw 2 4
Attaching the universal drive shaft to the tractor 2 6
Electrics 2 6
Hydraulic system 2 7
Jack stand 2 7
Unhitching the baler 2 8
Disconnecting the universal drive shaft 2 8
Transport and working position of pick-up 2 9
Ladder 2 9
Wheel chocks 2 9
Safety lock-up valve for tailgate 2 10
Bale discharge ramp 2 10
Fire extinguisher 2 10
Before transporting the baler 2 11
3 Basic adjustments and operation
Pick-up 3 2
Adjusting the working height of the pick-up
(pick-up without gauge wheels) 3 2
Adjusting the working height of the pick-up
(pick-up with gauge wheels} 3 2
Work in hay 3 2
Work in straw 3 2
Pick-up crop guard 3 2
Baling 3 3
Compression delay device 3 3
Crop feed indicator (option) 3 5
Main drive 3 6
Cam-type cut-out clutch – universal drive shaft 3 6
Shear bolt – pick-up drive 3 6
Backwinder 3 7
Bale discharge 3 7
Bale counter 3 8
Setting the bale density 3 9
Setting the bale diameter 3 9
Cutting unit 3 10
Removing knives 3 11
Blank knives 3 12
Rotor cut-out clutch 3 12
Net wrapping 3 12
Adjusting the net brake 3 12
Adjusting pressure springs for net feed
pressure roller 3 13
Spare net roll 3 15
Operating the net wrapping system 3 15
Twin twine wrapping 3 17
Twine box 3 17
Threading the twine 3 18
Adjusting twine tensioner (7) 3 20
Varying the wraps of twine on the outside
edges of the bale 3 20
Adjusting the number of twine wrappings 3 21
Operating the twin twine wrapping system 3 22
Delaying start of twine wrapping 3 23
Starting twine wrapping prematurely 3 23
Operating the net wrapping system 3 24
Operating the twin twine wrapping system 3 26
Problem / Cause and Remedy 3 29
4 Maintenance
Important maintenance instructions 4 1
Drive system 4 3
Angle drive gearbox – input speed 540 rpm 4 3
Angle drive gearbox – input speed 1000 rpm 4 3
Adjusting the tension of the drive chains 4 4
Tensioning spring for pick-up drive 4 4
Tensioning the drive chain for the pick-up
stub auger 4 4
Adjusting pressure springs for net feed
pressure roller 4 4
Adjusting the tensioning device for the knife
that cuts the net 4 5
Adjusting the disc brake 4 5
Tensioning the springs for the chain drive
(belts and rotor) 4 5
Tensioning the spring for the tailgate chain drive 4 6
Adjusting the counter-balance spring for the pick-up 4 6
Adjusting the tension spring for net roll brake 4 6
Adjusting spring cylinder for free-wheel drive 4 6
Drive brake – twine wrapping 4 7
Adjusting pressure springs at cut-out clutch 4 7
Slackening the flat belts 4 8
Installing flat belts 4 9
Repairing flat belts 4 10
Adjusting belt run 4 12
Automatic chain lubrication 4 13
Type of lubricant 4 13
Fire extinguisher 4 13
Checking the fire extinguisher for proper
working order 4 13
5 Lubrication chart

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V