CLAAS VARIO CUTTERBAR II LEXION Operator’s Manual – PDF DOWNLOAD

Description

CLAAS VARIO CUTTERBAR II LEXION Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS VARIO CUTTERBAR II LEXION Operator’s Manual – PDF DOWNLOAD

IMPORTANT INFORMATION:

The instructions contained in this manual should be carefully read and observed by all persons involved with the operation, maintenance and inspection of this machine in order to prevent accidents. In particular, read the section “Safety rules”. The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design of this CLAAS machine or detract from its functional performance, with a possible adverse effect on the active and/or passive operational safety of the machine and its occupational safety standards (accident prevention).

• CLAAS is in no way liable for any damage or personal injury caused through the use of parts other than original CLAAS parts, accessories and ancillary equipment.
• Technical data, dimensions and weights are given as an indication only. CLAAS reserves the right to make changes subsequently as technical developments continue.
• Liability for errors or omissions not accepted. The indicator boards “front, rear, right and left” are always in direction of travel (forwards).

TABLE OF CONTENTS:

CLAAS VARIO CUTTERBAR II LEXION Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 1 1 1
2 Contents
Contents 2 1 1
3 General Information
Important information 3 1 1
Identification plate / serial number 3 2 1
4 Safety rules
Safety rules 4 1 1
Identification of warning and danger signs 4 1 1
Correct use of the vehicle 4 1 1
General safety and accident prevention regulations 4 1 1
Safety locks 4 1 3
Feed rake safety locks 4 1 3
Reel safety locks 4 1 3
Safety decals with pictorials 4 2 1
5 Specifications
CLAAS VARIO Cutterbar 5 1 1
6 Prior to operation
Carry out prior to initial operation 6 1 1
Removing the transport fixtures 6 1 1
Adjusting the cutterbar floatation springs 6 1 1
7 Operation
Converting from the grain cutterbar to the rape cutterbar 7 1 1
Electrical switching on the cutterbar 7 1 1
Converting the cutterbar 7 1 1
Inserting intermediate plates and filler plates 7 1 3
Fitting the rape side knife 7 1 5
Hydraulic connections
(right hand side) 7 1 6
Hydraulic and electrical connections
(left hand side) 7 1 6
Covering the rape knife with the safety guard 7 1 7
Operation of the rape cutterbar 7 1 8
Switching the left side knife on and off 7 1 8
Converting from the rape cutterbar to the grain cutterbar 7 2 1
Removing the rape side knife 7 2 1
Fitting the dividers 7 2 3
Removing intermediate plates and filler plates 7 2 4
Operation of the grain cutterbar 7 3 1
Manual table adjustment on the cutterbar 7 3 1
Table adjustment via CEBIS 7 3 1
Manual table adjustment from the operator’s platform 7 3 2
Adjustments at the cutterbar 7 4 1
Crop dividers 7 4 1
Folding the dividers 7 4 1
Attaching the outer deflector: 7 4 1
Removing the outer deflector: 7 4 2
Adjusting the dividers 7 4 3
Special crop divider 7 4 4
Folding the crop divider points 7 4 5
Crop lifters 7 4 5
Knife 7 4 7
Removing the knife 7 4 7
Installing the knife 7 4 7
Adjusting the knife height 7 4 8
Adjusting the knife clips 7 4 8
Spare knife 7 4 8
Cutterbar skids 7 4 9
Reel 7 4 9
Adjusting the reel height 7 4 9
Adjusting the reel height (fine adjustment) 7 4 10
Reel tines 7 4 10
Reel drive 7 4 10
Reel fore and aft adjustment 7 4 11
Intake auger 7 4 11
Adjusting the clearance to the cutterbar trough
bottom plate 7 4 11
Adjusting the cutterbar stripper profiles 7 4 13
Replacing knife sections in the field 7 4 14
8 Maintenance
Important maintenance instructions 8 1 1
Important maintenance instructions and safety rules 8 1 1
Maintenance schedules and lubricants charts 8 2 1
Maintenance schedule 8 2 1
Lubricants chart 8 2 2
Hydraulic system 8 3 1
Hydraulic deposits 8 3 1
Checking the oil level 8 3 1
Changing hydraulic oil 8 3 1
Replacing the filter 8 3 2
Dismantled oil filter (F) 8 3 2
Bleeding the reel cylinders 8 3 2
Bleeding the reel cylinders hydraulic fore and aft
reel adjustment 8 3 3
Knife drive casing 8 4 1
Checking the oil level / oil change 8 4 1
Knife drive 8 4 2
Adjusting jockey pulley V belts 8 4 2
Reel height adjustment
(Basic setting) 8 5 1
Running Rails / Drive Chains / Jockey
Pulley / Limit Switch / Potentiometer 8 6 1
Adjusting the running rails 8 6 1
Cleaning the running rails 8 6 1
Drive chain tensioning 8 6 1
Tensioning the drive chain for the intake auger 8 6 1
Reel drive tensioning 8 6 2
Belt run – knife drive 8 6 3
Adjusting the tensioning cylinder for the knife drive 8 6 4
Adjusting the limit switch 8 6 4
Adjusting the potentiometer 8 6 5
Contents
2 1 2 BA SW VARIO – 299 601 0
Contents
Suggestions for winter storage 8 7 1
9 Lubrication chart
Lubricants and notes 9 1 1
10 Index
Index 10 1 1

CLAAS VARIO CUTTERBAR II LEXION OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V