Claas Volto 52, 52 T, 45 Operation Manual PDF Download

Description

Claas Volto 52 / 52 T Volto 45 Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Volto 52 / 52 T Volto 45 Operator’s Manual – PDF DOWNLOAD

INTRODUCTION

• This manual provides information on how to use, adjust and service the CLAAS rotary tedder. Please note that the CLAAS rotary tedder is also referred to as the machine in the following chapters. Follow the advice on correct maintenance and servicing in order to ensure maximum performance and a long service life of your machine.
• Also, have assembly of your machine and regular inspections carried out by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time.
• By ensuring correct operation, and carrying out maintenance and service work with care, you will be able to make full use of state-of-the-art technology and of the experience with which your machine has been designed.

3 Preface
OF SPECIAL IMPORTANCE

• Please note that the CLAAS rotary tedder is also referred to simply as the machine in the following chapters. The instructions set forth in this manual must be read carefully and followed by all persons concerned with the operation, maintenance, repair or inspection of this machine in order to prevent accidents.
• Read especially sections “Safety Instructions” and “Prior to operation”. The use of spare parts, accessories and additional equipment which is not originally manufactured, and checked and released by CLAAS can have its negative effect on specific design features of the CLAAS machine or on its operability, thereby impair active and/or passive operating safety, as
• well as safety at work (accident prevention). CLAAS will in no way be liable for damage or personal injury caused by the use of other than original CLAAS parts, accessories and additional equipment.
• Technical specifications, dimensions and weights are understood with the usual tolerances. IMPORTANT: Front, rear, right and left refer to the direction of forward travel.

TABLE OF CONTENTS:

Claas Volto 52 / 52 T Volto 45 Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 11
2 Table of contents
3 Preface
Of special importance 31
Identification plate 32
4 Safety Instructions
Designated use 41
General Safety and Accident Prevention Instructions 41
Mounted machines 42
Trailed machines 42
PTO Operation 42
Hydraulic system 42
Tyres 43
Maintenance 43
Sound pressure level 43
Identification of warnings and dangers 43
Safety decals with warning symbols 45
5 Specifications
VOLTO 52 51
VOLTO 52 T 51
VOLTO 45 51
Calculation of axle loads, minimum
ballasting and total weight 52
6 Assembly
Loading and unloading machine 61
Initial assembly of machine 62
7 Prior to operation
Check and observe the following before putting into operation! 71
Attachment to the tractor 72
Headstock (VOLTO 52 / 45) 72
Drawbar (VOLTO 52 T) 73
Tractor linkage drawbar 73
Swinging drawbar 73
Drive shaft 73
Adapting the PTO shaft length 74
Prop stand 75
Hydraulic system 75
Electrical connection 76
Pull rope 76
Storing the machine 77
Prior to transportation 79
Driving on public roads 711
8 Operation
Application 81
Working position 81
Transport position 82
Spreading position 83
Lowering the machine at standstill 83
IMAGES PREVIEW OF THE MANUAL:

CLAAS VOLTO 52 / 52 T VOLTO 45 OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

s.m