CLAAS VOLTO 740 H/ 740 HR VOLTO 64 / 640 H /640 HR OPERATOR´S MANUAL – PDF DOWNLOAD

Description

CLAAS VOLTO 740 H/ 740 HR VOLTO 64 / 640 H /640 HR OPERATOR´S MANUAL – PDF DOWNLOAD

DESCRIPTION:

CLAAS VOLTO 740 H/ 740 HR VOLTO 64 / 640 H /640 HR OPERATOR´S MANUAL – PDF DOWNLOAD

INTRODUCTION

This operator’s manual provides information concerning the use, adjustment, setting and operation of the CLAAS rotary tedder. The advice on the care and servicing should be followed in order to obtain maximum performance and long service. The assembly and the regular inspection of your machine should be performed by your specialist workshop. Neglect in maintenance and service and incorrect use will result in poor machine efficiency and loss of valuable time. By correct operation and servicing you can make full use of the technical knowledge and experience with which your machine has been designed.

TABLE OF CONTENTS:

CLAAS VOLTO 740 H/ 740 HR VOLTO 64 / 640 H /640 HR OPERATOR´S MANUAL – PDF DOWNLOAD

1 Machine overview
2 Introduction
Introduction 21
3 Contents
4 Preface
Important 41
Identification Plate 42
5 Safety
Instructions
Designated Use 51
Identification of warnings and dangers 51
Attached machines 53
Machines as trailors 53
PTO operation 53
Hydraulic system 53
Tyres 54
Maintenance 54
Sound pressure level 54
Safety decals with pictorials 55
6 Specifications
VOLTO 740 H 61
VOLTO 740 HR 61
VOLTO 640 H / 64 61
VOLTO 640 HR 61
Calculating the axial loads, minimum ballast and total weight 62
Calculation of the minimum ballast front 63
Calculation of the minimum ballast rear 63
Calculation of the actual front axle load 63
Calculation of the actual overall weight 63
Calculation of the actual rear axle load 64
Carrying capacity of the tyres 64
7 Prior to Operation
Check and observe the following before putting into operation! 71
Attachment to the tractor 72
Headstock 72
Universal drive shaft 73
Prop stand 74
Hydraulics 75
Unlocking cable for machine inclination setting 77
Pull cable 77
Electrical system 77
Putting the machine down 78
Prior to transportation 710
Driving on public roads 711
8 Operation
Use 81
Working position 81
Transport position 82
Lowering the machine at standstill 83
Raising on tight bends and when reversing 84
Changing the spreading angle 85
Position of main wheels 86
Tines position 86
Setting the working height 88
Putting the rotary tedder in use 88
Possibilities for use 89
Headland clearing 89
Crop guard (optional equipment) 812
Setting the crop guard 812
Tedding with crop guard
(optional equipment) 813
Swath raking 814
Swath spreading 814
Tedding: 814
Swath turning (optional equipment) 814
Windrowing (optional equipment) 815
Optional equipment 816
Night rotor drive 816
Tine loss securing facility 816
Crop guard – hydraulically hinged 817
Headstock – Outrigger wheel 817
Hydraulic synchronised raising 818
Kit for detachable forks 818
Hydraulic connection parts for the tractor 818
Lighting adaptor for USA 818
9 Maintenance
Important Maintenance Instructions 91
Wheels / tyres 91
Hydraulic System 91
Bolts 91
Lubrication 92
Protective Devices (Safety frame) 92
Drive systems 93
Gearbox lubrication 93
Hydraulics 94
Hydraulic hoses 94
Pressure accumulator 94
Universal drive shaft 95
Screw connections 96
Tine – fixing screws 96
Stop screws 96
Connecting elements 97
Tyres 97
End of season storage 97
10 Lubrication chart
Safety Rules 101
Lubricants 101
Lubrication 101

IMAGES PREVIEW OF THE MANUAL:

CLAAS VOLTO 740 H/ 740 HR VOLTO 64 / 640 H /640 HR OPERATOR´S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.M