Claas VOLTO 75 T VOLTO 750 operator’s Manual – PDF DOWNLOAD

Description

Claas VOLTO 75 T VOLTO 750 operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas VOLTO 75 T VOLTO 750 operator’s Manual – PDF DOWNLOAD

INTRODUCTION

This manual provides information on the use, setting and servicing of the CLAAS rotary tedder. The advice on the care and servicing should be followed in order to obtain maximum performance and long service. The assembly and the regular inspection of your machine should be performed by your specialist workshop. Neglect in maintenance and service and incorrect use will result in poor machine efficiency and loss of valuable time. By correct operation and servicing you can make full use of the technical knowledge and experience with which your machine has been designed.
TABLE OF CONTENTS:

Claas VOLTO 75 T VOLTO 750 operator’s Manual – PDF DOWNLOAD

1 Introduction………………………………………………. 4
Introduction…………………………………………….. 4
2 Contents………………………………………………….. 5
3 Preface…………………………………………………… 6
Of special importance…………………………………….. 6
Identification plate……………………………………… 6
4 Safety Instructions………………………………………… 7
Designated use…………………………………………… 7
General safety and accident prevention instructions………….. 7
Basic rule:………………………………………….. 7
General:…………………………………………….. 7
Mounted machines…………………………………………. 8
Trailed machines…………………………………………. 8
PTO operation……………………………………………. 8
Tyres…………………………………………………… 9
Maintenance……………………………………………… 9
Sound pressure level……………………………………… 9
Identification of warnings and dangers………………………10
Safety decals with warning symbols………………………….11
5 Specifications……………………………………………..14
VOLTO 75 T / 750………………………………………….14
6 Before Operation……………………………………………15
Check and observe the following before putting into operation….15
Attachment to the tractor………………………………….16
Drive shaft…………………………………………..16
Adapting the PTO shaft length……………………….17
Prop stand……………………………………………18
Storing the machine……………………………………….19
Prior to transportation……………………………………19
Driving on public roads………………………………..20
7 Operation………………………………………………….21
Operation………………………………………………..21
Working position………………………………………21
All six wheels must be locked……………………….21
To do this move lever (11) to the front………………21
Engage lock (3) in the central hole of segment (2)…….21
Transport position…………………………………….22
Varying the spreading angle…………………………….23
Tine pitch adjustment………………………………….24
Tine support – circular shape……………………….24
Tine support – rectangular shape…………………….25
Adjusting the working height……………………………26
Setting the rotary tedder into operation…………………26
Possibilities of use………………………………………27
Field edge clearance…………………………………..27
Tedding………………………………………………27
Windrow spreading……………………………………..28
Turning………………………………………………28
Swath turning…………………………………………28
Windrowing……………………………………………28
Optional equipment………………………………………..29
Swathing gearbox………………………………………29
Ensuring against the loss of a tine……………………..29
Tine support – rectangularshape:…………………….29
8 Maintenance………………………………………………..30
Important maintenance instructions………………………….30
Bolts………………………………………………..30
Lubrication…………………………………………..30
Guards (safety frame)………………………………….30
Wheels / tyres………………………………………..30
Drive systems…………………………………………….31
Gearbox lubrication……………………………………31
Drive shaft………………………………………………31
Screw connections…………………………………………31
Spring tine securing bolts……………………………..31
Fasteners………………………………………………..32
Tyres……………………………………………………32
End of season storage……………………………………..32
9 Lubrication Chart…………………………………………..33
Safety instructions……………………………………….33
Lubricants……………………………………………….33
Lubrication………………………………………………33

IMAGES PREVIEW OF THE MANUAL:

CLAAS VOLTO 75 T VOLTO 750 OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M