Clark Forklift NP246 NS246 English OM-538 Operator’s Manual

Description

Clark Forklift NP246 NS246 English OM-538 Operator’s Manual

CLARK FORKLIFT NP246 NS246 ENGLISH OM-538 OPERATOR’S MANUAL:

Image Preview:

Description:

Clark Forklift NP246 NS246 English OM-538 Operator’s Manual

• Lift trucks are specialized machines with unique operating characteristics designed to perform specific jobs. Their function and operation is not like a car or ordinary truck. They require specific instructions and rules for safe operation. Safe operation of a lift truck is of primary importance to CLARK. Our experience with lift truck accidents has shown that when accidents happen and people are killed or injured the causes are: 1. OPERATOR NOT PROPERLY TRAINED 2. OPERATOR NOT EXPERIENCED WITH LIFT TRUCK OPERATION
• 3. BASIC SAFETY RULES NOT FOLLOWED 4. LIFT TRUCK WAS NOT MAINTAINED IN A SAFE OPERATING CONDITION. For these reasons, CLARK wants you to know about the safe operation and correct maintenance of your lift truck. This manual is designed to help you learn how to operate your lift truck safely. This manual shows and tells you about operator maintenance and the important general safety rules and hazards of lift truck operation. It describes the special components and features of the truck and their function. The correct operating procedures are shown and explained.
• Illustrations and important safety messages are included for clear understanding. A section on maintenance and lubrication is included for the lift truck mechanic. The operator’s manual is not a training manual. It is a guide to help authorized operators safely operate their lift truck by illustrating the correct procedures. It cannot cover every possible situation which may result in an accident.
• You must watch for hazards in your work areas and correct them. It is important that you learn the information in this manual and know your company safety rules! Be sure that your equipment is maintained in a safe condition and do not operate a damaged truck. Practice safe operation every time you use your lift truck. Let’s join together to set new standards in safety.
• Remember, before you start operating this lift truck, be sure that you understand all driving procedures. It is your responsibility, and it is important to you and your family, to operate your lift truck safely and efficiently. And be aware that the Federal Occupational Safety and Health Act and state laws require that operators be completely trained in the sate operation of lift trucks.
• CLARK lift trucks are built to take hard work, but not abuse. They are built to be dependable, but they are only as safe and efficient as the operator and the persons responsible for maintaining them. Do not make any repairs to this truck unless you have been trained in lift truck repair procedures and have been authorized by your employer.

Table Of Contents:

Clark Forklift NP246 NS246 English OM-538 Operator’s Manual

chapter page chapter page
1 – OPERATOR
MAINTENANCE
Daily inspection
Safety inspection
Wheel inspection
Battery inspection
Maintenance problems
2 – GENERAL SAFETY
Do’s and dont’s 2.1
Surface and surface capacity 2.2
No riders 2.3
Pedestrians 2.4
Operator protection 2.5
Travel 2.6
Tipover 2.7
Fork safety 2.8
Loading docks 2.9
Pinch points 2.1 0
Parking 2.11
3 – OPERATING HAZARDS
Operating hazards 3.1
U.L. construction type 3.2
Fast turns and high loads 3.3
Rear swing 3.4
Pallets and skids 3.5
Loose loads 3.6
Long and wide loads 3. 7
Chain slack 3.8
Right-angle stacking 3.9
Low overhead clearance 3.1 O
4 – KNOW YOUR TRUCK
Chart 4.1
Capacity, components and
features 4.2
Operators compartment 4.3
Steering system and control
handle 4.4
Brake system, drive axle and
electrical components 4.5
Filters, uprights and options 4.6
Name plate 4. 7
Truck decal locations 4.8
Safety decals 4.9
5 – BEFORE OPERATION
Drivers’s daily check list 5.1
Daily inspection – wheels 5.2
Daily inspection – visual 5.3
Daily inspection – forks 5.4
Daily inspection – battery
connector, key switch, and horn
Daily inspection – instruments
Daily inspection – tilt
Daily inspection – lift and lower
Daily inspection – pantograph
Daily inspection – side shift
Daily inspection – forward and
reverse travel
Daily inspection – plugging and
high-speed cut out switch
Daily inspection – review
6 – OPERATION
Before you start 6.1
Traveling empty 6.2
Picking up a load 6.3
Traveling loaded 6.4
Right angle stacking NP 6.5
Right angle stacking NS 6.6
Parking 6.7
7 – EMERGENCY TOWING
Emergency towing 7.1
8 – PLANNED MAINTENANCE
General 8.1
Intervals 8.2
Battery removal 8.3
Handling battery 8.4
Handling battery 8.5
Handling battery 8.6
Battery cleaning 8. 7
Battery life.records and
installation 8.8
9 – LUBRICATION
Standard 9. 1
Location chart 9.2
Cold storage 9.3
10 – TROUBLESHOOTING
Troubleshooting 10.1
Troubleshooting 10.2
Troubleshooting 10.3
11 – SCHEMATICS
ii
NP 300 Electrical 11.1
NP 300 Hydraulic 11 .2
NS 300 Electrical 11 .3
NS 300 Hydraulic 11 .4

Please Note:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

sk