CLARK FORKLIFT OH-362 SAFE MAINTENANCE OVERHAUL MANUAL

Description

CLARK FORKLIFT OH 362 SAFE MAINTENANCE OVERHAUL MANUAL – PDF DOWNLOAD

Need help? Contact: [email protected]

Image Preview:

Description:

CLARK FORKLIFT OH 362 SAFE MAINTENANCE OVERHAUL MANUAL – PDF DOWNLOAD

• Powered industrial trucks may become hazardous if adequate maintenance is not done. Therefore, maintenance facilities, personnel and procedures must be provided. Maintenance and inspection of all powered industrial trucks should be done in agreement with the recommendation in thls manual and the following practices. 1. A scheduled preventive maintenance, lubrication, and inspect ion system must be followed.
• 2. Only qualified and authorized personnel should be permitted to maintain, repair, adjust, and inspect industrial trucks. 3. Before Leaving The Truck: A. Stop Truck. B Fully lower the load engaging means. C. Put directional controls in neutral. D. Apply the parking brake. E. Stop the engine or turn off power. F. Lock the control or ignition circuit. G. Put b locks at the wheels if truck is on a ramp, or being worked on. 4. Before Working On Truck: A. Raise wheels free of floor or disconnect power source. B. Use blocks or other positive truck positioning devices.
• C . Put blocks under the load engaging means, innermast(s), or chassis before working under them. Before working on engine fuel system of gasoline powered trucks with gravity feed fuel systems, make sure fuel shutoff valve is closed. Before working on engine fuel system of LP gas powered trucks, close LP gas cylinder valve and run engine until there is no more fuel in the system and engine stops running.
• Operation to check performance of the truck or attachments must be done in a clear, authorized, safe area. 5. Before Starting To Qperate The Truck: A. Be in operating position. B. Push clutch (or brake pedal on automatic transmission and electric trucks). C. Put the directional controls in neutral. D. Start engine or turn on power. E . Before operating truck, check functioning of lift and tilt systems, directional and speed controls, steering, warning devices, brakes, and any attachment. (If used) F. Release parking brake.

Table Of Contents:

CLARK FORKLIFT OH 362 SAFE MAINTENANCE OVERHAUL MANUAL – PDF DOWNLOAD

Engine – Perkins Diesel 4.236
Engine – Perkins Diesel 4.203
Engine – Perkins Diesel 4.2032
Hydratork Transmission (H200 – H211)
Starting Motor Overhaul .
Alternator Overhaul
Alternator Overhaul
Electric Checks for Internal Combustion Lift Trucks .
Drive Axle Ends Overhaul
Differential Overhaul – . • . . . . • .
Two Piece Case and Four Pinion
Differential Overhaul – . . . . . .
One Piece Case and Two Pinion
Brake Bleeding . . • . . .
Master Cylinder Overhaul
Inching Cylinder Overhaul
Disc Brake Overhaul . .
Hydrovac Overhaul
Parking Brake Overhaul
Steering Gear Overhaul
Power Steering Cylinder Overhaul
Hydraulic (Steer) Pump Overhaul
Hydraulic Pump Overhaul .
Hydraulic Valve Overhaul
Tilt Cylinder Overhaul
Tilt Cylinder Overhaul
Lubrication Specifications and Recommendations

Please Note:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

sk