CLARK FORKLIFT PMA-321 S203040 SP 202530 SERVICE MANUAL

Description

CLARK FORKLIFT PMA 321 S203040 SP 202530 SERVICE MANUAL – PDF DOWNLOAD

Questions? Email us: [email protected]

Image Preview:

Description:

CLARK FORKLIFT PMA 321 S203040 SP 202530 SERVICE MANUAL – PDF DOWNLOAD

• Powered industrial trucks may become hazardous if adequate maintenance is not done. Therefore, suitable maintenance facilities, personnel, and procedures must be provided. Maintenance and inspection of all powered industrial trucks should be done in agreement with the recommendations in this manual and the following practices: 1. A scheduled preventive maintenance, lubrication, and inspection program must be followed.
• 2. Only qualified and authorized personnel should be permitted to maintain, repair, adjust, and inspect industrial trucks. 3. Operation to check performance of the truck or attachments must be done in an authorized, safe, clear area. 4. Before Starting To Drive The Truck: 1) Be in operating position. 2) Push clutch (or brake pedal on automatic transmission and electric trucks).
• 3) Put directional control in neutral. 4) Start engine or turn on power. 5) Before operating truck, check functioning of lift and tilt systems, directional and speed controls, steering, warning devices, brakes, and any attachments. 6) Release parking brake. 5. Before Leaving The Truck: 1) Stop truck. 2) Fully lower the load engaging means. 3) Put directional control in neutral.
• 4) Apply the parking brake. 5) Stop the engine or turn off power. 6) Lock the control or ignition circuit. 7) Put blocks at the wheels if truck is on a ramp, or being worked on. 6. Before Working On Truck: 1) Raise wheels free of floor or disconnect power source. 2) Use blocks or other positive truck positioning devices. 3) Put blocks under the load engaging means, innermast(s), or chassis before working under them.
• 7. Before working on engine fuel system of gasoline powered trucks with gravity-feed fuel systems, be sure fuel shutoff valve is closed. 8. Before working on engine fuel system of LP-gas powered trucks, close LP-gas cylinder valve and run engine until there is no more fuel in the system and engine stops running.

Table Of Contents:

CLARK FORKLIFT PMA 321 S203040 SP 202530 SERVICE MANUAL – PDF DOWNLOAD

Powrworker 11S 11 Model Pictorial Index
Powrworker 11SP 11 Model Pictorial Index
Lubrication Chart(s) & Specifications
Battery . . . . . . . . . .
El?ctric Battery Powered Industrial
Trucks – UL583 . • . . . • •
Electric Drive Motor (Brake) Cut-off Switch
Pump Motor Operating Switch
Electric Motors
Electric Contactors ….
Drive Unit …..
Drive Wheel & Tire ..
Brake . . . . ..
Hydraulic Sump Tanks
Vertically Mounted Tanks
Horizontally Mounted Tanks
Hydraulic System Pressure Checks
Single Pump Installation
Dual Pump Installation ….
Upright & Carriage Roller Check & Ajd.
4 & 6 Roller Carriages ..•.
Standard & Hi-Lo Upright Rollers
Lift Chain Adjustment • . ..
Upright Down Drift and Tilt Cylinder .
Bleeding Compound Lift Cylinders
Lift Chain Maintenance …•
Trail (Load) Wheels • . .
Decals – Plates – Upright Deck
And Serial No. Location .
Truck Specifications . . . .
PM Inspection and Drivers Daily Inspection
Fire Extinguisher Recommendations .

Please Note:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

sk