Daewoo Doosan WHEEL LOADER DL200-3 DL200TC Shop Manual 950106-00985AE – PDF DOWNLOAD

Description

Daewoo Doosan WHEEL LOADER DL200-3 DL200TC Shop Manual 950106-00985AE – PDF DOWNLOAD

DESCRIPTION:

Daewoo Doosan WHEEL LOADER DL200-3 DL200TC Shop Manual 950106-00985AE – PDF DOWNLOAD

GENERAL

• Only trained and authorized personnel should operate and maintain the machine. Follow all safety rules, regulations and instructions when operating or performing maintenance on machine.
• Do not operate machine if you are under the influence of drugs or alcohol. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely operate a machine.
• When working with other personnel on a work site, be sure that all personnel know the nature of work and understand all hand signals that are to be used.
• Be sure that all guards and shields are installed in their proper location. Have guards and shields repaired or replaced immediately if damaged.
• Be sure that you understand the use and maintenance of all safety features such as pilot cutoff switch and seat belt. Use them at all times.
• Never remove, modify or disable any safety features. Always keep them in good operating condition.
• Always check for and know the location of underground and overhead utility lines before working.
• Failure to use and maintain safety features according to instructions in this manual, Safety Manual and Shop Manual can result in death or serious injury.

Know Your Machine

Know how to operate your machine. Know the purpose of all controls, gauges, signals, indicators and monitor displays. Know the rated load capacity, speed range, braking and steering characteristics, turning radius and operating clearances. Keep in mind that rain, snow, ice, loose gravel, soft ground, slopes, etc., can change operating capabilities of your machine

Proper Work Tools and Attachments

• Only use work tools and attachments that are recommended by DOOSAN for use on DOOSAN machines. When installing and using optional attachments, read instruction manual for attachment, and general information related to attachments in this manual.
• Because DOOSAN cannot anticipate, identify or test all attachments that owners may want to install on their machines, contact DOOSAN for written authorization and approval of attachments, and their compatibility with optional kits. Attachments and attachment control systems that are compatible with the machine are required for safe and reliable machine operation. SP003003 Page 9 Wheel Loader Safety Do not exceed maximum operating weight (machine weight plus attachment) that is listed on ROPS certification plate.
• Make sure that all guards and shields are in place on machine and on work tool. Depending on type or combination of work equipment, there is a potential that work equipment could interfere with the cabin or other parts of machine. Before using unfamiliar work equipment, check if there is any potential for interference, and operate with caution. While you are performing any maintenance, testing, or adjustments to attachments, stay clear of the following areas: cutting edges, pinch points, and crushing surfaces.
• Never use attachment as a work platform or manlift. Contact your DOOSAN distributor about auxiliary hydraulic kits for attachments installation. If you are in doubt about the compatibility of a particular attachment with the machine, consult your DOOSAN distributor.

Pressurized Fluids

• Pressurized air or fluids can cause debris and/or fluids to be blown out. This could result in death or serious injury. Immediately after operation is stopped, coolant, engine oil, and hydraulic oil are at their highest temperatures and the radiator and hydraulic tank are still under pressure. Always wait for temperature to cool down. Follow specified procedures when attempting to remove caps, drain oil or coolant, or replacing filters.
• Always wait for temperature to cool down, and follow specified procedures when performing these operations. Failure to do so can result in death or serious injury. When pressurized air and/or pressurized water is used for cleaning, wear protective clothing, protective shoes, and eye protection. Eye protection includes goggles or a protective face shield. Pressure can be trapped in a hydraulic system and should be relieved before maintenance is started.
• Releasing trapped pressure can cause sudden machine movement or attachment movement. Use caution if you disconnect hydraulic lines or fittings. High-pressure oil that is released can cause a hose to whip or oil to spray. Fluid penetration can result in death or serious injury.
• If fluid enters skin or eyes, get immediate medical attention from a physician familiar with this injury. Obey all local laws and regulations for disposal of liquids. To prevent hot coolant from spraying out, stop engine and wait for coolant to cool. Using gloves, slowly loosen cap to relieve pressure.

Flying or Falling Objects

On work sites where there is a potential hazard that flying or falling objects can come in contact with operator’s cabin, select and use a guard to match operating conditions for additional operator protection. Working in mines, tunnels, deep pits, and loose or wet surfaces, can produce hazards of falling rocks or flying objects. Additional protection for operator’s cabin may be required such as a Falling Object Protective Structure (FOPS) or window guards. Contact your DOOSAN distributor for information on available protective guards. To prevent personnel from being struck by flying objects, keep personnel out of work area

Correction of Machine Problems

If any machine problems are found during operation and maintenance (noise, vibration, smell, incorrect gauges, smoke, oil leakage, etc.), or if any abnormal warming alerts are displayed on display monitor, stop the machine immediately and take the necessary corrective actions. Do not operate the machine until problem has been corrected

Crushing and Cutting

• Keep objects away from moving fan blades. Fan blades can throw and cut objects. Do not use a wire rope that is kinked or frayed, or a wire rope with any loss of diameter. Wear leather gloves when handling a wire rope. When striking a loose retainer pin, it can fly out and can cause a serious injury.
• Make sure that area is clear of personnel when striking a retainer pin. To avoid injury to your eyes, wear safety goggles when striking a retainer pin. Do not put your hand, arm or any other part of your body between movable parts. If going between movable parts is necessary, always position and secure work equipment so it cannot move.
• Properly support equipment before performing any work or maintenance under raised equipment. If control levers are operated, clearance between machine and work equipment will change and this may lead to serious damage or can result in death or serious injury.
• Stay clear of areas that may have a sudden change in clearance with machine movement or equipment movement. Stay clear of all rotating and moving parts. Unless instructed, never attempt adjustments while machine is moving or while engine is running.
• Do not depend on hydraulic cylinders to support raised equipment. Equipment can fall if a control is moved, or if a hydraulic line breaks, is loosened or disconnected. If it is necessary to remove guards to perform maintenance, always install guards after maintenance is completed. Always have at least two people working together if the engine must be runing during service.
• One person needs to remain in the operator’s seat, ready to work the controls to stop the machine or stop engine, if necessary.

TABLE OF CONTENTS:

Daewoo Doosan WHEEL LOADER DL200-3 DL200TC Shop Manual 950106-00985AE – PDF DOWNLOAD

sm_DL200-3 DL200TC-3(950106-00985AE)............................................................................  0
	Table of Contents...........................................................................................  7
	Safety......................................................................................................  9
		Wheel Loader Safety..................................................................................... 11
			Safety Instructions................................................................................. 15
			Applicable Models................................................................................... 15
			Safety Messages..................................................................................... 16
				Signal Words.................................................................................... 16
			Safety Decals....................................................................................... 17
			General............................................................................................. 18
				Know Your Machine............................................................................... 18
				Proper Work Tools and Attachments............................................................... 18
				Pressurized Fluids.............................................................................. 19
				Flying or Falling Objects....................................................................... 20
				Personal Protective Equipment (PPE)............................................................. 20
				Correction of Machine Problems.................................................................. 21
				Crushing and Cutting............................................................................ 21
				Hot Coolant and Oils - Burn Prevention.......................................................... 22
				Fire and Explosion Prevention................................................................... 22
				Fire Extinguisher and First-Aid Kit (Emergency Medical Kit)..................................... 26
				Electrical System and Electrical Shock.......................................................... 26
				Roll-over Protective Structure (ROPS)/ Falling Object Protective Structure (FOPS)............... 27
			Transportation...................................................................................... 29
				Obey State and Local Over-the-Road Laws & Regulations........................................... 29
				Loading and Unloading........................................................................... 29
				Transporting Machine............................................................................ 30
			Operation........................................................................................... 31
				Before Engine Starting.......................................................................... 31
				Work Site....................................................................................... 31
				Check Tire Pressure and Condition............................................................... 32
				Mounting/Dismounting............................................................................ 32
				Cleaning........................................................................................ 33
				Operator Station................................................................................ 33
				Seat Belt....................................................................................... 34
				Visibility Information.......................................................................... 35
				Boost Starting or Charging Engine Batteries..................................................... 36
				Starting Engine................................................................................. 37
				Traveling....................................................................................... 38
				Lifting and Digging............................................................................. 39
				Digging Beneath Overhangs....................................................................... 40
				Digging Beneath Wheel Loader.................................................................... 40
				Operation on Slopes............................................................................. 40
				Towing.......................................................................................... 42
				Attachment...................................................................................... 43
				Equipment Lowering with Engine Stopped.......................................................... 44
				Preventing Risk of Injuries or Death From Boom and Bucket....................................... 44
				Engine Stop..................................................................................... 45
				Parking Machine................................................................................. 46
				Preservation/Storing Machine.................................................................... 47
			Maintenance......................................................................................... 49
				Warning Tag..................................................................................... 52
				Cleaning........................................................................................ 53
				Proper Tools and Clothing....................................................................... 53
				Disassembling Precautions....................................................................... 53
				Use of Lighting................................................................................. 54
				Fire and Explosion Prevention................................................................... 54
				Burn Prevention................................................................................. 55
				Rubber That Contains Fluorides.................................................................. 56
				Rubber and Plastics............................................................................. 57
				Welding Repairs................................................................................. 58
				Working on Machine.............................................................................. 59
				Lock Inspection Covers.......................................................................... 60
				Accumulator..................................................................................... 60
				Compressed Air.................................................................................. 60
				High-pressure Lines, Tubes and Hoses............................................................ 61
				Supports and Blocking for Work Equipment........................................................ 62
				Battery......................................................................................... 62
			Environment and Circumstances....................................................................... 64
				Work Site Areas Requiring Extra Caution......................................................... 64
				High-voltage Cables............................................................................. 66
				Underground Operation........................................................................... 66
				Working in Water................................................................................ 67
				Working in Contaminated Environment............................................................. 67
				Operation in Extreme Conditions................................................................. 68
				Exhaust Ventilation............................................................................. 72
				Asbestos Information............................................................................ 72
				Silica Dust Information......................................................................... 73
				Disposal of Hazardous Materials................................................................. 73
				Sound........................................................................................... 73
				Vibration....................................................................................... 74
				Before Returning the Machine to the Customer.................................................... 74
	Specifications.............................................................................................. 75
		Specification for DL200-3 / DL200TC-3................................................................... 77
			Safety Instructions................................................................................. 81
			Applicable Models................................................................................... 81
			Component Locations................................................................................. 82
			General Specifications.............................................................................. 86
			Engine Performance Curves (Per KS-R1004 Standard)................................................... 88
			Working Range and Dimensions........................................................................ 90
			Working Capacities.................................................................................. 94
				Bucket Capacity................................................................................. 94
				Stability....................................................................................... 94
			Material Weight..................................................................................... 95
				Approximate Weight of Workload Materials........................................................ 95
	General Maintenance......................................................................................... 99
		General Maintenance Instructions SP002454...............................................................101
			Safety Instructions.................................................................................105
			Applicable Models...................................................................................105
			Welding Precautions and Instructions................................................................106
			Hydraulic System - General Precautions..............................................................107
			Maintenance Service and Repair Procedure............................................................109
				General Precautions.............................................................................109
			Hydraulic System Cleanliness and Oil Leaks..........................................................110
				Maintenance Precautions for Hydraulic System Service............................................110
				Oil Leakage Precautions.........................................................................111
			Cleaning and Inspection.............................................................................112
				General Instructions............................................................................112
				Bearing Inspection..............................................................................113
		Standard Torques........................................................................................121
			Safety Instructions.................................................................................125
			Applicable Models...................................................................................125
			Torque Values for Standard Metric Fasteners.........................................................126
			Torque Values for Standard U.S. Fasteners...........................................................127
			Type 8 Phosphate Coated Hardware....................................................................129
			Torque Values for Hose Clamps.......................................................................130
			ORFS Swivel Nut Recommended Torque..................................................................130
			Torque Values for Split Flanges.....................................................................131
			Torque Wrench Extension Tools.......................................................................132
				Torque Multiplication...........................................................................132
				Other Uses for Torque Wrench Extension Tools....................................................133
				Tightening Torque Specifications (Metric).......................................................134
	Drivetrain..................................................................................................137
		Transmission and Torque Converter (ZF 4WG-160)..........................................................139
			Safety Instructions.................................................................................143
			Applicable Models...................................................................................143
			General.............................................................................................144
				Torque Limits for Screws........................................................................145
			Labeling of Identification Plate for ZF Powershift Transmission.....................................146
			Configuration 4 WG-160..............................................................................147
			Measuring Points and Connections 4 WG-160...........................................................150
				Required Oil Grade..............................................................................151
			Special Tools.......................................................................................152
				List of Special Tools for Disassembly and Reassembly............................................152
			Disassembly.........................................................................................158
				Electro-hydraulic Control and Zf Fine Filter (Replaceable Filter)...............................158
				Inductive Sensor, Hall Sensor, Breather, Oil Filler and Oil Drain Plug..........................163
				Outputs and Closure Parts Pump Shaft (PTO-Shaft)................................................170
				Removal of Input Shaft, Output Shaft, Pump Shaft (PTO-shaft) and Clutches.......................178
				Clutches KV/KR/K1/K2/K3/K4 Input and Output Shaft...............................................182
			Reassembly..........................................................................................205
				Clutches KV/KR/K1/K2/K3/K4 Input and Output Shaft...............................................205
			Installation of Input Shaft, Output Shaft, Pump Shaft (Power-takeoff Shaft) and Clutches............248
			Assembly............................................................................................255
				Outputs and Closure Parts Pump Shaft (PTO-shaft)................................................255
			Reassembly..........................................................................................268
				Converter Back-pressure Valve...................................................................268
				Oil Pressure Pump...............................................................................269
				Engine Connection (Direct Mount)................................................................271
				Engine Connection (Remote Mount)................................................................272
				Emergency Steering Pump.........................................................................275
				Inductive Sensor, Hall Sensor, Breather, Oil Filler and Oil Drain Plug..........................276
				Electro-hydraulic Control with Proportional Valves:.............................................278
			Parking Brake.......................................................................................286
				Functional Characteristics and Maintenance Instructions for Mechanical Sliding Caliper M90......286
				Spring Applied Hydraulic Released Sliding Calliper FSG 75.......................................291
				Spring Applied Hydraulic Released Sliding Calliper FSG 90 and FSG 110...........................299
				Spring Applied Hydraulic Released Sliding Calliper FSG 88.......................................307
		Transmission Error Codes (ZF) ..........................................................................319
			Safety Instructions.................................................................................323
			Applicable Models...................................................................................323
			Definition of Operating Modes.......................................................................324
				Normal..........................................................................................324
				Substitute Clutch Control.......................................................................324
				Limp-home.......................................................................................324
				Transmission Shut Down..........................................................................324
				TCU Shut Down...................................................................................325
				TCU Key Off.....................................................................................325
				TCU Idle........................................................................................325
			Table of Fault Codes................................................................................326
			Measurement of Resistance at Actuator/ Sensors and Cable............................................348
				Actuator........................................................................................348
				Cable...........................................................................................348
		Axle (ZF-MT-L 3075 II)..................................................................................349
			Safety Instructions.................................................................................353
			Applicable Models...................................................................................353
			Lubrication and Maintenance Instructions............................................................354
				Oil Grade.......................................................................................354
				Oil Change......................................................................................354
				Make Wear Measurement on the Multidisk Brake....................................................356
				Inscriptions on Model Identification Plate......................................................357
				Tightening Torques for Screws...................................................................358
			Special Tools.......................................................................................359
				List of Special Tools for Disassembly and Reassembly............................................359
				Disassembly Output and Brake....................................................................366
				Disassembly Axle Housing........................................................................373
				Disassembly Input...............................................................................375
				Disassembly Differentials.......................................................................378
				Reassembly Differentials........................................................................384
				Reassembly Input................................................................................397
				Reassembly Axle Housing.........................................................................406
				Reassembly Output and Brake.....................................................................408
		Driveshaft..............................................................................................419
			Safety Instructions.................................................................................423
			Applicable Models...................................................................................423
				Driveshaft Weight...............................................................................424
				Driveshaft Coupling Dimension...................................................................424
				Driveshaft Tightening Torque....................................................................424
	Brake.......................................................................................................425
		Service Brake...........................................................................................427
			Safety Instructions.................................................................................431
			Applicable Models...................................................................................431
			General Description.................................................................................432
			Service Brake System................................................................................433
		Brake Supply Valve......................................................................................435
			Safety Instructions.................................................................................439
			Applicable Models...................................................................................439
			Supply Valve........................................................................................440
		Charging Block..........................................................................................443
			Safety Instructions.................................................................................447
			Applicable Models...................................................................................447
			Charging Block......................................................................................448
				Parts List......................................................................................448
		Parking Brake...........................................................................................451
			Safety Instructions.................................................................................455
			Applicable Models...................................................................................455
			General Description.................................................................................456
			Functional Characteristics and Maintenance Instructions.............................................457
				Functional Characteristics of Spring Loaded Sliding Caliper Brakes..............................457
				Mounting and Basic Setting Regulations..........................................................459
				Adjusting Regulations...........................................................................460
				Emergency Release of Parking Brake..............................................................460
				Maintenance and Repair Work.....................................................................461
				General.........................................................................................463
		Brake Pedal Valve.......................................................................................465
			Safety Instructions.................................................................................469
			Applicable Models...................................................................................469
			General Description.................................................................................470
				Theory of Operation.............................................................................470
				Specification...................................................................................472
		Accumulator.............................................................................................473
			Safety Instructions.................................................................................477
			Applicable Models...................................................................................477
			General Description.................................................................................478
				Specifications..................................................................................480
	Steering....................................................................................................481
		Power Steering System...................................................................................483
			Safety Instructions.................................................................................487
			Applicable Models...................................................................................487
			General Description.................................................................................488
			Disassembly.........................................................................................489
			Assembly............................................................................................496
		Priority Valve..........................................................................................505
			Safety Instructions.................................................................................509
			Applicable Models...................................................................................509
			General Description.................................................................................510
				Tool List.......................................................................................510
			Disassembly.........................................................................................511
			Assembly............................................................................................513
		Emergency Steering......................................................................................515
			Safety Instructions.................................................................................519
			Applicable Models...................................................................................519
			General Description.................................................................................520
				Emergency Steering Function Test................................................................522
				Emergency Steering Automatic Test...............................................................522
			Pump and DC Motor...................................................................................524
	Frame.......................................................................................................525
		Articulation Center.....................................................................................527
			Safety Instructions.................................................................................531
			Applicable Models...................................................................................531
			General Description.................................................................................532
				Maintenance Standard............................................................................532
		Counterweight...........................................................................................535
			Safety Instructions.................................................................................539
			Applicable Models...................................................................................539
			Specifications......................................................................................540
			Counterweight.......................................................................................540
	Tank........................................................................................................541
		Oil Tank................................................................................................543
			Safety Instructions.................................................................................547
			Applicable Models...................................................................................547
			General Description.................................................................................548
				Parts List......................................................................................548
				Specifications..................................................................................549
		Fuel Tank...............................................................................................551
			Safety Instructions.................................................................................555
			Applicable Models...................................................................................555
			General Description.................................................................................556
				Parts List......................................................................................556
				Specifications..................................................................................557
					Fuel Sender Setting.........................................................................557
	Hydraulics..................................................................................................559
		Main Pump...............................................................................................561
			Safety Instructions.................................................................................565
			Applicable Models...................................................................................565
			Specification.......................................................................................566
			Sectional View......................................................................................566
			General Repair Instructions.........................................................................567
			Seal Kits and Subassemblies.........................................................................569
			Sealing of the Driveshaft...........................................................................572
			Sealing of the Regulator Housing....................................................................574
			Projection of Pump Support/Checking of the Directional Valve........................................575
			Removing of the Impeller............................................................................577
			Disassembly of the Regulator........................................................................579
			Removing of the Port Plate..........................................................................580
			Removing of the Rotary Group........................................................................581
			Disassembly of the Rotary Group.....................................................................583
			Disassembly of the Hydraulic Control................................................................584
			Inspection Notes....................................................................................585
				Blind Threaded Hole in Driveshaft...............................................................586
			Pump Assembly.......................................................................................601
			Inspection Notes....................................................................................604
			Pump Assembly.......................................................................................606
			Tightening Torques..................................................................................613
				Tightening Torques for Shaft Bolts (Metric ISO Standard Thread).................................613
				Tightening Torques for Locking Screws VSTI (Metric ISO Fine Thread).............................613
				Tightening Torques for Seal-lock Nuts (Metric ISO-Standard Thread)..............................614
				Tightening Torques for Cross-slotted Lens Head Screws DIN 7985 (Metric ISO- Standard Thread)....614
			Safety Instructions.................................................................................615
				General Advice..................................................................................615
				Before Starting.................................................................................615
				Start...........................................................................................615
				Attention.......................................................................................616
				Hydraulic Equipment.............................................................................616
		Main Control Valve......................................................................................617
			Safety Instructions.................................................................................621
			Applicable Models...................................................................................621
			General Description.................................................................................622
			Disassembly/Reassembly..............................................................................624
		Load Isolation System...................................................................................635
			Safety Instructions.................................................................................639
			Applicable Models...................................................................................639
			General Description.................................................................................640
				Overview........................................................................................641
				Hydraulic Circuit...............................................................................642
				Accumulator Charging Method.....................................................................642
				LIS Valve.......................................................................................644
				Accumulator.....................................................................................646
		Cooling System..........................................................................................647
			Safety Instructions.................................................................................651
			Applicable Models...................................................................................651
			General.............................................................................................652
				Function........................................................................................653
				Fan Motor Pressure and Fan Speed................................................................654
				Fan and Brake Pump..............................................................................656
				Tightening Torques..............................................................................675
			Fan Motor...........................................................................................676
				Specifications..................................................................................676
				Parts List......................................................................................676
				Disassembly.....................................................................................677
				Inspect Parts for Wear..........................................................................680
				Reassembly......................................................................................681
			Fan Control Valve...................................................................................684
				Specifications..................................................................................684
				Parts List......................................................................................684
		Pilot System............................................................................................685
			Safety Instructions.................................................................................689
			Applicable Models...................................................................................689
			Function............................................................................................690
			Fingertip Joystick..................................................................................691
				Specification...................................................................................691
				Parts List......................................................................................692
				Parts List......................................................................................696
		Hydraulic Schematic DL200-3 / DL200TC-3 / DL220-3.......................................................699
			Safety Instructions.................................................................................703
			Applicable Models...................................................................................703
			DL200-3 / DL220-3...................................................................................705
			DL200TC-3...........................................................................................706
	Electrical System...........................................................................................707
		Air Conditioner.........................................................................................709
			Safety Instructions.................................................................................713
			Applicable Models...................................................................................713
			General Description.................................................................................714
				Internal and External Filters...................................................................715
				Air-conditioning System Layout..................................................................716
				Air Conditioner/heater Circuit Diagram..........................................................717
				Air Conditioner/Heater Unit.....................................................................718
				Ambient Air Temperature Sensor..................................................................723
				Sun Sensor......................................................................................724
				Control Panel...................................................................................724
				Compressor......................................................................................731
				Receiver Dryer..................................................................................731
			Troubleshooting.....................................................................................732
			Eight of R134a Gas Used In Machines.................................................................734
			Refrigerant System Repairs..........................................................................735
				Refrigerant Safe Handling Procedures............................................................735
				Repair and Replacement Procedure................................................................736
				Refrigerant Recovery............................................................................738
				Vacuuming Refrigerant System....................................................................738
				Leakage Check...................................................................................740
				Refrigerant Charging............................................................................740
				Inspecting System For Leakage...................................................................742
		Electrical System.......................................................................................743
			Safety Instructions.................................................................................748
			Applicable Models...................................................................................748
			Overview............................................................................................749
			Electric Supply System..............................................................................750
			Engine Starting Circuit.............................................................................752
				Operation During Start Process..................................................................752
				Operation After Start Process...................................................................754
			Engine Stop System..................................................................................755
			Charging System.....................................................................................756
			Monitoring System...................................................................................757
				Instrument Panel................................................................................758
				Function Check..................................................................................760
				Monitoring System Schematic.....................................................................760
			Operation...........................................................................................762
				Instruments Gauge...............................................................................762
				Indicator Lights................................................................................762
				Initial Operation...............................................................................764
				Multifunction Display...........................................................................765
				Indication of Warning Lights....................................................................767
				Indication of Indicator Lights..................................................................769
			Graphic Information Area Display....................................................................771
				Overview........................................................................................771
				Main Menus for the Graphic Display Area.........................................................771
				Menu Selector Buttons...........................................................................772
			User Menu...........................................................................................773
			Service Menu........................................................................................780
				Entering/Accessing and Exiting/Escaping Menus...................................................780
				Service Menu Selections.........................................................................781
			Windshield Wiper....................................................................................803
				Front Windshield Wiper..........................................................................803
				Rear Windshield Wiper...........................................................................805
			Lighting System.....................................................................................808
				Light Circuit...................................................................................808
			Power Mode Control..................................................................................812
			Engine Control System...............................................................................813
				Accelerator Pedal...............................................................................814
				Auto Idle Control...............................................................................815
			Electric Detent System..............................................................................816
				Electrical Circuit..............................................................................816
				Boom Kick-out...................................................................................817
				Return To Dig...................................................................................818
			Cooling Fan Control System..........................................................................819
				Outline.........................................................................................819
				Diagram.........................................................................................819
				Electrical Diagram..............................................................................820
				Parts of Cooling Fan Control System.............................................................821
				Operation of Cooling Fan Control System.........................................................823
			Emergency Steering System (Option)..................................................................825
				Block Diagram...................................................................................825
				Emergency Steering System Components............................................................826
				Emergency Steering System Electrical Circuit....................................................829
		Electrical Schematic DL200-3 / DL200TC-3 / DL220-3 / DL250-3 / DL250TC-3................................831
			Safety Instructions.................................................................................835
			Applicable Models...................................................................................835
			DL200-3 / DL200TC-3 / DL220-3 /DL250-3 / DL250TC-3..................................................837

DAEWOO DOOSAN WHEEL LOADER DL200-3 DL200TC SHOP MANUAL 950106-00985AE – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.M