DOOSAN SOLOR EXCAVATOR PARTS MANUAL 2021-7144BEF – PDF DOWNLOAD
DESCRIPTION:
DOOSAN SOLOR EXCAVATOR PARTS MANUAL 2021-7144BEF – PDF DOWNLOAD
- Daewoo reserves the right to improve our products in a continuing process to provide the best possible product to the marketplace. These improvements can be implemented at any time with no obligation to change materials on previously sold products.
- It is recommended that consumers periodically contact their distributors for recent documentation on purchased equipment. This documentation may include attachments and optional equipment that is not available in your machine’s package.
- Please call your distributor for additional items that you may require. Illustrations used throughout this manual are used only as a representation of the actual piece of equipment, and may vary from the actual item.
FOREWORD
2. HOW TO USE THIS PARTS LIST.
- Key No. Part No. Description It shows the reference no. on the illustration. It shows the part number of the parts which are included in an illustration. It shows the name of part. Components of an assembly part are shown with [e] marks and are shown on the line, or lines, below the assembly part.
- Q’ty Also if the components with [ •] mark is consists of further components part. These further components are shown with the marks [ee]. It shows the quantity use for one machine. quantity of components show the quantity for one assembly part.
- Service code Abbreviations in this column have their own meaning as show below. The parts with this abbreviation shows that the part requires some work on it before instatlling in the machine.
- B D The part with this abbreviation is a component of an assembly and is not available independently. The assembly part containing this part should be ordered. K This means that the part is contained in the service part kit. M This means that the part is available only with its mating parts altogether. A The part with this abbreviation shows that the quantity of the part is changed depending on the machine. such as an adjusting shim etc.
- S This part is specially provided as a service part. which was not provided in the machine before shipping from the factory. G This part need grade control and should be requested as the same grade of counter part. OP Optional parts.
- EX Specific design parts. OS Over-sized parts. US Under-sized parts. # (Part with abbreviation “OS” or “US” is described on the line below the standard sized part.)
- The part with this mark is newly added on that page of the equipment. Serial No. shows the machine serial number which the parts were applied. As to the engine Serial No. shows only engine serial number which the parts were applied. Parts without any applicable serial number are used in every machine
- . ICA shows the interchangeability between the original and the improved parts. Abbreviations used in this column are as follows; Part No. in the column of “Replaceable part” can be used instead of this part but not vice versa.
- P This must not be used for machine. The part No. in the column “Replaceable part” should be used instead. T Parts No. those in the column of “Replaceable part” can be used as an assembly instead of this part.
- Y This part and the part in the column of “Replaceable part” are interchangeable with each other. Blank : This part has no “Repleaceable part” Replaceable part Interchangeable parts nos. and their required quantity are shown in this column. If interchangeable improved parts are provided for the parts which you may order, the improved parts classified as “I”, “P” “T” or “Y” may be supplied.
- • When repairing, it is recommended to use our standard part. • Researching the assembling parts from Part No., see the parts lndex of this parts list.
TABLE OF CONTENTS:
DOOSAN SOLOR EXCAVATOR PARTS MANUAL 2021-7144BEF – PDF DOWNLOAD
TABLES DES MATIERES
e ENGINE PARTS
Fig. 100 CYLINDER BLOCK BLOC CYLINDRE 2
110 TIMING GEAR HOUSING CARTER DE DISTRIBUTION 4
120 FLYWHEEL HOUSING & OIL PUMP CARTER DE VOLANT MOTEUR & POMPE A HUILE 6
130 CYLINDER HEAD & COVER CULLASSE & COUVERCLE 8
140 SUCTION MANIFOLD & AIR CLEANER SUCTION TUBULURE & FILTRE A AIR 12
150 EXHAUST MANIFOLD & MUFFLER POT D’ECHAPPEMENT & SILENCIEUX 14
160 CAMSHAFT & DRIVING GEAR ARBRE A CAMES & PIGNON 16
170 CRANKSHAFT & PISTON VILEBREQUIN & PISTON 18
180 OIL SYSTEM SYSTEME DE HUILE 20
190 COOLING SYSTEM SYSTEME DE REFROIDISSMENT 22
200 FUEL INJECTION PUMP INJECTEUR DE GAZOLE 24
210 GOVERNOR GOUVERNEUR 28
220 FUEL INJECTION NOZZLE INJECTEUR ET PORTE-INJECTEUR
230 STARTING MOTOR DEMARREUR
240 GEN ELA TOR GENELATEUR
250 GASKET SET JOINT POSER
BODY PARTS
Fig. 1100 TRACK ASS’Y-WIDTH 900mm ENSEMBLE TRAIN DE ROULEMENT 44
1110 TRACK PIPING CONDUITES DE TRANSLATION 46
1120 BLADE-1100mm DOZER 48
2100 SWING BODY ORIENTATION CORPS 50
2110 ENGINE MOUNTING ENSEMBLE MOTEUR 52
2120 FUEL TANK RESERVOIR A GAZOLE 54
2130 OIL TANK RESERVOIR D’HUILE 56
2140 LOW PIPING CONDUITES REFROIDSSEMENT 58
2150 MAIN PIPING CIRCUIT HYDRAULIQUE PRINCIPAL 60
2160 GREASE PIPING GRAISSE CONDUITES 62
2170 LEVER ASS’Y ( 1) ENSEMBLE LEVIER 64
2180 LEVER ASS’Y (2) ENSEMBLE LEVIER 66
2190 CONTROL STAND CONSOLE 70
2200 BONNET CAPOT 72
2210 SPONGE ASS’Y ENSEMBLE EPONGE 74
2220 PUMP DRIVE CHASSER POMPE 76
2230 ELECTRIC PARTS ( 1) EQUIPMENT ELECTRIQUE
2240 ELECTRIC p~T~,,ARTS BOOK 1~6QM~f§_~J;frHeJBf9N
2250 ENGINE CONTROL LEVER
2260 FUEL PIPING
e FRONT PARTS
Fig. 3100 FRONT
3110 BUCKET-0.35M3
3120 BOOM SWING ASS’Y
3130 FRONT PIPING
e OTHER PARTS
Fig. 4100 NAME PLATE-DOMESTIC
4110 NAME PLATE-ENGLISH
4115 NAME PLATE-EUROPE
4120 TOOLS
4130 SPARE PARTS
e OPTION PARTS
COMMANDE REGIME MOTEUR
CONDUITES A GAZOLE
FRONT ALES
GODET
ENSEMBLE ORIENTATION FLECHE
CONDUITES FRONTALES
PLAQUE D’IDENTIFICATION
PLAQUE D’IDENTIFICATION
OUTILES
PIECES DE RECHANGE
Fig. 5100 TRACK ASS’Y-EXPORT WIDTH 810mm ENSEMBLE TRAIN DE ROULEMENT
5110 TRACK PIPING-EXPORT CONDUITES DE TRANSLATION
5120 BLADE-EXPORT 810mm
5130 BREAKER PIPING-ONE WAY
5140 OPTION PIPING-TWO WAY
5150 FUEL PIPING-SEDIMENTER
DOZER
CANALISATION DE FREIN
CANALISATION DE FREIN
CONDUITES A GAZOLE
e HYDRAULIC COMPONENTS
Fig. 6100 BOOM CYLINDER
6110 ARM CYLINDER
6120 BUCKET CYLINDER
6130 BOOM SWING CYLINDER
6140 DOZER CYLINDER
6150 SWING DEVICE
6160 TRA YEL DEVICE
6170 MAIN PUMP
6180 CONTROL VAL YE
6190 INLET BODY ASS’Y
6200 WORK BODY ASS’Y-BUCKET
6210 WORK BODY ASS’Y-BOOM
6220 WORK BODY ASS’Y-BOOM SWING
6230 WORK BODY ASS’Y-TRAVEL
VERIN DE FLECHE
YERIN DE BALANCIER
YERIN DE GODET
VERIN ORIENTATION FLECHE
YERIN DE BLADE
SYSTEME D’ORIENTATION
SYSTEME D’TRANSLATION
POMPE
DISTRIBUTEUR
TIROIRS DE COMMANDE
TIROIRS DE COMMANDE
TIROIRS DE COMMANDE
TIROIRS DE COMMANDE
TIROIRS DE COMMANDE
6240 WORK BODY ASS’Y-DOZER TIROIRS DE COMMANDE
6260 WORK BODY ASS’Y-ARM TIROIRS DE COMMANDE 144
6270 WORK BODY ASS’Y-SWING TIROIRS DE COMMANDE 146
6280 INLET BODY ASS’Y TIROIRS DE COMMANDE 148
6290 RELIEF VAL VE ASS’Y TIROIRS DE COMMANDE 150
6300 O/L RELIEF VAL VE ASS’Y TIROIRS DE COMMANDE 152
6310 O/L RELIEF VALVE ASS’Y TIROIRS DE COMMANDE 154
6320 ROTARY JOINT JOINT ROTATOIRE 156
e WORLDWIDE NETWORK
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M