Fassi Crane F 95A.22 Use & Maintenance Manual (0001) – PDF Download

Description

Fassi Crane F 95A.22 Use & Maintenance Manual (0001)

File Details:

Fassi Crane F 95A.22 Use & Maintenance Manual (0001)

• Manual Language:English
• Pages: 60
• Size: 3.72 MB
• File Format:PDF 
• Downloadable:Yes

FASSI CRANE F 95A.22 USE & MAINTENANCE MANUAL (0001) – PDF DOWNLOAD:

Image Preview:

Description:

Fassi Crane F 95A.22 Use & Maintenance Manual (0001)

• READ THIS MANUAL CAREFULLY prior to use of the crane or any maintenance. A few minutes spent now could save time and labour later. Be sure that the unit has been installed, inspected and tested in accordance with the local legal requirements.
• To operate the crane it is necessary to fully understand its working, safety and warranty norms.
  Check that protections are in their place and that all safety devices are fitted and active.
• Warning plates, as well as instruction and operation plates must be replaced when no longer readable or missing. (See chapters A – B)
• Do not run the engine in a indoor area without first making sure there is ade-quate ventilation. Fit a suitable extension tube to the vehicle exhaust pipe to take the fumes away from the working area.
• Stabilize the vehicle by means of the outrigger rams, checking that they rest on a solid base; if in doubt use special larger outrigger base plates (available on request). (See chapter IX)
• Level the crane so as it is always operated on a horizontal plane.
• Check that the taps of the outrigger rams safety check valves are closed (when fitted). Never operate the outriggers when the crane is loaded.
• Remember that the stability of the unit (cranevehicle) is only guaranteed by the maximum lateral extension of the outriggers.

Table of Contents:

Fassi Crane F 95A.22 Use & Maintenance Manual (0001)

I INTRODUCTION
II SAFETY NORMS
III INSTRUCTIONS FOR CRANE USE
IV IDENTIFICATION OF THE CRANE MODEL
V TECHNICAL DATA
VI CRANE NOMENCLATURE
VII SAFETY AND PROTECTION DEVICES
VIII LOAD LIMITING DEVICE LIFTING MOMENT LIMITING DEVICE (OPTIONAL)
IX CONTROLS TO STABILIZE THE VEHICLE
X CONTROLS TO OPERATE THE CRANE
XI USE OF IMPLEMENTS
XII MAINTENANCE INSTRUCTIONS
XIII POSSIBLE FAULTS KIV HYDRAULIC AND ELECTRIC SCHEMATICS
XV OIL AND LUBRICANT CHARACTERISTICS
A INSTRUCTION AND WARNING PLATES
B CAPACITY PLATES

Please Note:

• This is the SAME exact manual used by your dealers to fix your vehicle.
•  The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
•  Any queries / doubts regarding your purchase, please feel free to contact [email protected]