Fassi Crane F1000A F1100AXP.28 Use and Maintenance Manual – PDF DOWNLOAD

Description

Fassi Crane F1000A F1100AXP.28 Use and Maintenance Manual

FILE DETAILS:

Fassi Crane F1000A F1100AXP.28 Use and Maintenance Manual 

Language : English
Pages : 128
Downloadable : YES
Format : PDF
Serial No :1119
Size : 3.14 MB

DESCRIPTION:

Fassi Crane F1000A F1100AXP.28 Use and Maintenance Manual 

INTRODUCTION:

The fitment of the crane on the vehicle must be carried out in accordance with the instructions given by FASSI in the manual for hydraulic crane fitting and the relevant chassis manufacturers directives. The Manufacturer declines all responsibility and guarantee if the fitting is entrusted to workshops without sufficient technical capability to carry out the work in conformity.

• Be sure that the unit has been installed, inspected and tested in accordance with the local legal requirements. As well as the principal safety norms, this manual contains a description of the crane and the instructions for use and maintenance.
• The following instructions refer to mobile cranes in general and must be integrated with the manual for use supplied by the centre responsible for the crane fitting on truck, vehicle or other type of structure. Some of the options described in the use and maintenance manual are available only on request; therefore they may not be on your crane.
• READ THIS MANUAL CAREFULLY prior to use or any maintenance. A few minutes spent now could save time and labour later. Always conform to the safety norms and the instructions for use and maintenance contained in the present manual in order to guarantee a long life to the crane.

TABLE OF CONTENTS:

Fassi Crane F1000A F1100AXP.28 Use and Maintenance Manual 

INDEX
1 INTRODUCTION
2 CLASSIFICATION OF THE CRANE MODEL
2.1 Generality
2.2 Hydraulic jibs
2.3 Technical data
3 CAPACITY PLATES
3.1 Generality
3.2 Capacity plates with lifting moment limiting device
4 HYDRAULIC SCHEMATICS
5 ELECTRIC SCHEMATICS
6 SAFETY NORMS
7 WARNING AND INSTRUCTIONS
7.1 Generality
7.2 Before operating
7.3 During operation
7.4 At the end of the operation (Prior to driving the vehicle)
7.5 Residual risks
8 IDENTIFICATION OF THE CRANE MODEL
8.1 Generality
8.2 Crane mark
9 CRANE NOMENCLATURE
9.1 Controls for crane and outriggers through push-button panel of the radio remote control
10 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
10.1 Controls for crane and outriggers through push-button panel of the radio remote control
11 SUPPLEMENTARY BEAMS
11.1 Generality
11.2 Identification of the supplementary beams
12 TILTABLE OUTRIGGER RAMS (not available)
13 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
13.1 Generality
13.2.2 Functions of control levers for stabilization with radio-remote control
13.3 Controls to stabilize the vehicle
13.3.1 Crane with fixed or manually tiltable supports for outrigger rams
13.3.2 Crane with hydraulic tiltable supports (WITH CHAIN) for outrigger rams
14 CONTROLS TO OPERATE THE CRANE
14.1 Generality
14.2 Radio-remote control
14.2.1 Use of the radio-remote control
Edition 15.04.2008
14.2.2 Push-button panel of the radio remote control “RCH”
14.2.3 Push-button panel of the radio remote control “SCANRECO”
14.2.4 Icon legend
14.3 Emergency station from the column (if accessible) or
Control station (version with load limiting device) (not available)
14.4 Manoeuvres to unfold the crane into a working condition
14.5 Manoeuvres to fold the crane into the rest condition
14.6 Manoeuvres to unfold the crane “C” into a working condition (only for the crane version C)
14.7 Manoeuvres to fold the crane “C” into the rest condition (only for the crane version C)
14.8 Indicator of inner boom horizontal position (on request)
15 MANOEUVRES OF THE CRANE LOADS (version with load limiting device) (not available)
16 MANOEUVRES OF THE CRANE LOADS (version with lifting moment limiting device)
16.1 Generality
16.2 Lifting moment limiting device “EVOLUTION” (LMEV) and automatic dynamic control (ADC)
16.3 Control panels of the lifting moment limiting device (if fitted)
16.4 Load handling
16.4.1 “Block due to overload condition”
16.4.2 “Winch off” (when fitted)
16.4.3 “Lifting block” (Prolink)
16.4.4 Other functional characteristics
16.4.5 Visual indicator yellow/red light
16.5 Lifting moment limiting device for two working sectors
16.6 Rotation limiting device
16.7 Setting menu
16.8 Diagnostic: alarms and warnings
16.8.1 Emergency control station on the column and exclusion tap lever
16.8.2 Exclusion tap lever 7°/8° extension (if fitted)
16.9 XP device
16.9.1 Activation and instructions for use of the XP/CR device
16.10 “JDP” Function (if fitted)
17 USE OF IMPLEMENTS
17.1 Generality
17.2 Hydraulic connections for implements – supplementary hoses
17.3 Oil cooler (heat exchanger)
18 MANUAL EXTENSIONS
18.1 Generality
18.2 Lifting moment limiting device “ELECTRONIC” for the manual extensions
19 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
20 HYDRAULIC JIBS
20.1 Generality
20.2 Identification of the hydraulic jib
20.3 Nomenclature of the hydraulic jib
20.4 Ma no e u vres to un fold the jib in wor king con di tion
20.5 Ma no e u vres to fold the jib in rest con di tion
20.6 O pe ra tions to re mo ve the hy dra u lic jib from the cra ne
20.7 O pe ra tions to mount the hy dra u lic jib on the cra ne
20.8 Crane with lifting moment limiting device and “Prolink” (if fitted)
21 WINCH (if fitted)
21.1 Generality (version with lifting moment limiting device)
21.2 Winch for crane (version with lifting moment limiting device)
21.2.1 Winches equipped with a mechanical stroke end device
22 MAINTENANCE INSTRUCTIONS
22.1 Generality
22.2 Timer
22.3 After every 8 working hours or at the end of every working day
22.4 After every 40 working hours or after every working week
22.5 After every 100 working hours or more frequently in case of more intensive utilisation
22.6 After every 500 working hours or after every 6 working months
22.7 After every 1000 working hours or after every working year
22.8 Complete overhaul of the crane is required when 10.000 working hours or 10 years’life
are reached
22.9 Instructions for the dismantlement and the demolition of a FASSI crane
23 TABLE OF HYDRAULIC OIL AND LUBRICANTS CHA RAC TE RI STI CS
24 POSSIBLE FAULTS
24.1 Generality
24.2 Only operations which can be carried out by the user
24.3 Operations to be carried out only by a service center
25 INSTRUCTION AND WARNING PLATES

FASSI CRANE F1000A F1100AXP.28 USE AND MAINTENANCE MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com