Fella RAMOS SM 310 FP FP-KC FP-RC FP-SL Disc mower Operator’s Manual – PDF DOWNLOAD

1 Introduction 3
2 Safety 5
2.1 Intended use 5
2.2 Reasonably foreseeable misuse 5
2.3 Warranty and liability 5
2.4 User qualifications 5
2.5 Warnings and symbols 6
2.6 Warning notices on the machine 7
2.7 Safety instructions 9
2.7.1 General safety instructions 10
2.7.2 Special safety instructions 11
3 Machine description 12
3.1 Product features 12
3.2 Notices on the machine 13
3.3 Special equipment 14
3.4 Machine components 15
4 Specifications 18
4.1 Machine data 18
4.2 Noise information 19
4.3 Axle loads, gross weight and minimum ballast required 20
5 Before initial operation 21
5.1 Assembling the machine 21
5.2 Adjusting the drive shaft 21
6 Attachment to the tractor 23
6.1 Initial operation 23
6.2 Attaching the machine 23
6.3 Connecting the drive shaft to the tractor 24
6.4 Attaching the spring relief 24
7 Transport position and working position 26
7.1 Switching the machine to transport position 26
7.2 Switching the machine to working position 27
8 Using the machine 28
9 Settings 29
9.1 Adjusting the cutting height 29
9.2 Adjusting the tine rotor conditioner (KC) 29
9.2.1 Adjusting the conditioner intensity 29
9.2.2 Adjusting the swath guiding assembly 30
9.3 Adjusting conditioners with rubber rollers (RC) 30
9.3.1 Adjusting the conditioner intensity 30
9.3.2 Adjusting the swath guiding assembly. 31
10 Optional functions 32
10.1 Greater cutting height using anti-wear skids 32
10.2 Swath discs 32

10.3 KC spreader
10.4 Lamp holder
11 Machine storage
12 Rectifying faults
12.1 If the machine runs over an obstacle
12.2 Weiste triangle
12.3 Replacing driveGUARD
12.3.1 Preparatory work
12.3.2 Mower disc without feed drum
12.3.3 Mower disc with feed drum
12.3.4 Checks after replacing a driveGUARD element
12.4 Overload protection system for the conditioner
12.5 Blockages at the conditioner
13 Servicing
13.1 Maintenance intervals
13.2 Accessing the maintenance points
13.3 Cleaning
13.4 Tightening torques for nuts and bolts
13.5 Adhesive notices on the machine
13.6 Drive shaft
13.7 Gearbox
13.7.1 Angledrive
13.7.2 Entry gearbox and cutter bar
13.8 Chain drive of the rake
13.9 Cutter blades
13.9.1 Checking the cutter blades
13.9.2 Checking the cutter-blade bolt
13.9.3 Checking the blade retaining bolt
13.9.4 Checking the holding spring
13.9.5 Replacing the cutter blades and/or cutter-blade bolt
13.9.6 Replacing the cutter blades
13.9. 7 Replacing the blade retaining bolt and/or the holding spring
13.10 Check the protective covers
13.11 Lubrication instruction
14 Index