Fella RAMOS SM 310 FP-K Disc Mower Operator’s Manual – PDF DOWNLOAD

Description

Fella RAMOS SM 310 FP-K Disc Mower Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Fella RAMOS SM 310 FP-K Disc Mower Operator’s Manual – PDF DOWNLOAD

Language : English
Pages : 56
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Fella RAMOS SM 310 FP-K Disc Mower Operator’s Manual – PDF DOWNLOAD

Introduction:

• These operating instructions for the SM 310 FP-K disc mower contain detailed instructions and
  information regarding safe use, maintenance, special precautions and any special equipment that is
  available.
• As a result of continuous further development of the machines, all technical data, figures and
  photos in these operating instructions are non-binding and we reserve the right to make changes. No
  alteration service is offered for these operating instructions.

Operational instructions:
The arrow indicates an instruction for performing an operation.
-+ Always follow all operational instructions in the specified sequence.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Fella RAMOS SM 310 FP-K Disc Mower Operator’s Manual – PDF DOWNLOAD

1 Introduction 3
2 Safety 5
2.1 Intended use 5
2.2 Reasonably foreseeable misuse 5
2.3 Warranty and liability 5
2.4 User qualifications 5
2.5 Warnings and symbols 6
2.6 Warning notices on the machine 7
2.7 Safety instructions 8
2.7.1 General safety instructions 9
2.7.2 Special safety instructions 10
3 Machine description 11
3.1 Product features 11
3.2 Notices on the machine 11
3.3 Special equipment 12
3.4 Machine components 13
4 Specifications 14
4.1 Machine data 14
4.2 Noise information 15
4.3 Axle loads, gross weight and minimum ballast required 16
5 Before initial operation 17
5.1 Assembling the machine 17
5.2 Adjusting the drive shaft 17
6 Attachment to the tractor 19
6.1 Initial operation 19
6.2 Attaching the machine 19
6.3 Connecting the drive shaft to the tractor 19
6.4 Raise support leg 20
6.5 Attaching the spring relief 20
7 Transport position and working position 22
7.1 Switching the machine to transport position 22
7.2 Switching the machine to working position 23
8 Using the machine 24
9 Settings 25
9.1 Adjusting the cutting height 25
10 Optional functions 26
10.1 Greater cutting height using anti-wear skids 26
10.2 Lamp holder 26
11 Machine storage 27
12 Rectifying faults 29
12.1 If the machine runs over an obstacle 30
12.2 Weiste triangle 30
12.3 Replacing driveGUARD 30
SM 310 FP-K 1
12.3.1 Preparatory work
12.3.2 Mower disc without feed drum
12.3.3 Mower disc with feed drum
12.3.4 Checks after replacing a driveGUARD element
13 Servicing
13.1 Maintenance intervals
13.2 Accessing the maintenance points
13.3 Cleaning
13.4 Tightening torques for nuts and bolts
13.5 Adhesive notices on the machine
13.6 Drive shaft
13.7 Gearbox
13.7.1 Angledrive
13.7.2 Entry gearbox and cutter bar
13.8 Cutter blades
13.8.1 Checking the cutter blades
13.8.2 Checking the cutter-blade bolt
13.8.3 Checking the blade retaining bolt
13.8.4 Checking the holding spring
13.8.5 Replacing the cutter blades and/or cutter-blade bolt
13.8.6 Replacing the cutter blades
13.8. 7 Replacing the blade retaining bolt and/or the holding spring
13.9 Check the protective covers
13.10 Lubrication instruction
14 Index

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V