Grove Crane GMK 4080-1 Lattice Extension Operating Instructions Manual 3113180 – PDF DOWNLOAD

Description

Grove Crane GMK 4080-1 Lattice Extension Operating Instructions Manual 3113180 – PDF DOWNLOAD

FILE DETAILS:

Grove Crane GMK 4080-1 Lattice Extension Operating Instructions Manual 3113180 – PDF DOWNLOAD

Language : English
Pages : 264
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

DESCRIPTION:

Grove Crane GMK 4080-1 Lattice Extension Operating Instructions Manual 3113180 – PDF DOWNLOAD

Important information:
1.1 About these operating instructions:

Validity of these operating instructions:

• These operating instructions only apply to lattice extensions which were delivered by Manitowoc
  Crane Group Germany GmbH.
• In addition, for the operation of the truck crane with a lattice extension described in these
  operating instructions, all details in the included Operating instructions of the GMK 4080-1 for
  which the lattice extension was delivered from the factory, are applicable.

Prerequisites for assembly and operation:

The lattice extensions described in these operating instructions may only be operated together with
a GROVE truck crane GMK 4080-1 whose serial number is identical with the serial number that is
marked on the lattice extensions.

Safety instructions:

The operation of GMK 4080-1 with one of the lattice extensions described in these operating
instructions is subject to:
– all the basic safety instructions to be found in the subsequent section Basic safety
instructions and
– all the safety instructions contained in the supplied operating instructions of GMK 4080-1.
References to other operating instructions:
Cross references to other operating or maintenance instructions are shown in the following forms:
à GMK 4080-1 operating instructions, Part 2 Crane operation – Rigging work
The number for the chapter on Rigging work is found at the front, on the sec- ond page of the
operating instructions specified.
or
à GMK 4080-1 operating instructions – Safe load indicator
The corresponding page number can be found in the index, under the entry
for Safe load indicator.

TABLE OF CONTENTS:

Grove Crane GMK 4080-1 Lattice Extension Operating Instructions Manual 3113180 – PDF DOWNLOAD

1 Important information.........................................................................................  7
	1.1 About these operating instructions......................................................................  7
		Validity of these operating instructions................................................................  7
		Prerequisites for assembly and operation................................................................  7
		Safety instructions....................................................................................  7
		References to other operating instructions..............................................................  7
	1.2 Basic safety instructions...............................................................................  8
		1.2.1 Warnings and symbols..............................................................................  8
	1.3 Intended use............................................................................................  9
	1.4 Organizational measures................................................................................. 11
	1.5 Personnel qualifications................................................................................ 13
	1.6 Safety instructions for truck crane work................................................................ 14
2 Transport dimensions and weights.............................................................................. 19
	2.1 Swing-away lattice extension............................................................................ 19
	2.2 Boom extension.......................................................................................... 19
	2.3 Auxiliary single-sheave boom top........................................................................ 19
	2.4 Heavy load lattice extension............................................................................ 20
3 8.7/15 m swing-away lattice extension......................................................................... 23
	3.1 Validity................................................................................................ 23
	3.2 Additional operating and display elements............................................................... 23
		3.2.1 In the crane cab.................................................................................. 24
			At the control console right........................................................................ 24
			On the crane control display........................................................................ 25
			On the safe load indicator.......................................................................... 26
		3.2.2 Operating and display elements on the hand-held control........................................... 27
		3.2.3 Operating and display instruments on the swing-away lattice extension............................. 28
	3.3 Identification of the swing-away lattice extension...................................................... 29
		Serial number on section1.............................................................................. 30
		Serial number on section2.............................................................................. 30
	3.4 Composition of the swing-away lattice extension......................................................... 31
	3.5 Centres of gravity for slinging......................................................................... 33
	3.6 Checklists for rigging work............................................................................. 35
		3.6.1 Overview of the required rigging work............................................................. 35
		3.6.2 CHECKLIST: Installing 8.7/15 m swing-away lattice extension....................................... 36
		3.6.3 CHECKLIST: Removing 8.7/15 m swing-away lattice extension......................................... 38
			For a rigged lattice extension...................................................................... 38
			For a folded lattice extension...................................................................... 40
		3.6.4 CHECKLIST: Rigging the 8.7/15 m swing-away lattice extension...................................... 42
		3.6.5 CHECKLIST: Unrigging the 8.7/15m swing-away lattice extension.................................... 48
	3.7 Description of rigging work............................................................................. 55
		3.7.1 Preparing the truck crane for rigging............................................................. 55
			Prerequisites for rigging........................................................................... 55
			Prerequisites for unrigging......................................................................... 55
			Securing lattice extension with cord................................................................ 56
		3.7.2 Checking the transport condition.................................................................. 57
			Transport condition with removed lattice extension.................................................. 62
		3.7.3 Checking the anti-twist device on the hose drum................................................... 63
		3.7.4 Establishing/disconnecting the hydraulic connection............................................... 65
			Establishing the hydraulic connection............................................................... 65
			Breaking the hydraulic connection................................................................... 66
		3.7.5 Guides and holders for the hydraulic hoses........................................................ 67
			When unrigging...................................................................................... 67
			When rigging........................................................................................ 68
		3.7.6 Connections with folded lattice extension......................................................... 69
			Connections in the Front 1 area..................................................................... 69
			Connections in the Front 2 area..................................................................... 71
			Connections in the middle area...................................................................... 73
			Connections in the rear area........................................................................ 75
		3.7.7 Securing/releasing section 2..................................................................... 77
		3.7.8 Connecting/disconnecting the slewing connection................................................... 79
			Creating a slewing connection....................................................................... 79
			Releasing a slewing connection...................................................................... 80
		3.7.9 Connections on the left and right of the main boom head........................................... 81
			Establishing connections............................................................................ 81
			Releasing connections.............................................................................. 82
			Relieving the connecting points..................................................................... 84
		3.7.10 Swivelling the lattice extension when rigging.................................................... 87
			When rigging – section1............................................................................ 87
			When unrigging – section1.......................................................................... 88
			When rigging – section2............................................................................ 89
			When unrigging – section2.......................................................................... 90
		3.7.11 Establishing/releasing connections on the lattice extension..................................... 92
			Section1 and section2 installed................................................................... 93
			Only section1 installed........................................................................... 94
		3.7.12 Electrical connections on the lattice extension.................................................. 95
			On 8.7 m swing- away lattice extension.............................................................. 95
			On 15 m- swing- away lattice extension.............................................................. 97
		3.7.13 Unfolding/folding the deflection sheave.......................................................... 98
			Folding out the deflection sheave.................................................................. 98
			Folding in the deflection sheave................................................................... 99
		3.7.14 Positioning/removing the hoist rope..............................................................100
			Positioning hoist rope.............................................................................100
			Removing the hoist rope............................................................................100
			Possible reeving methods on the lattice extension..................................................101
		3.7.15 Installing/removing the lifting limit switch.....................................................102
			Overriding connection on main boom..................................................................102
			On 8.7 m swing- away lattice extension..............................................................103
			On 15 m swing- away lattice extension...............................................................104
		3.7.16 Installing/removing the anemometer...............................................................105
			On 8.7 m swing- away lattice extension..............................................................105
			On 15 m swing- away lattice extension...............................................................106
		3.7.17 Air traffic control light – electrical connection................................................107
			Establishing the electrical connection..............................................................107
			Disconnecting the electrical connection.............................................................108
		3.7.18 Derricking the lattice extension.................................................................109
			When rigging........................................................................................109
			During operation....................................................................................111
		3.7.19 Setting the angle – with the auxiliary crane.....................................................112
			Pin positions.......................................................................................113
		3.7.20 Setting the angle – without the auxiliary crane.................................................114
			Entering the RCL code..............................................................................114
			Setting an angle of 20 or 40......................................................................115
			Setting 0 angle....................................................................................117
			Inclining the truck crane...........................................................................119
		3.7.21 Transportation on a separate vehicle.............................................................120
	3.8 Operation with the lattice extension....................................................................121
		3.8.1 Setting the RCL...................................................................................122
			Derrickable lattice extension.......................................................................122
			Inclinable lattice extension........................................................................123
		3.8.2 Raising and setting down the main boom............................................................124
			Raising.............................................................................................124
			Setting down........................................................................................124
		3.8.3 Telescoping with rigged lattice extension.........................................................125
		3.8.4 Information about the RCL shutdown................................................................126
		3.8.5 Procedure if the permissible wind speed is exceeded...............................................127
		3.8.6 Information about the main boom operation when the lattice extension is folded/rigged.............128
			Folded..............................................................................................128
			Rigged..............................................................................................128
	3.9 Turning loads with the lattice extension................................................................131
		3.9.1 Prerequisites.....................................................................................131
		3.9.2 Setting the RCL...................................................................................132
		3.9.3 Turning a load....................................................................................134
	3.10 Driving with rigged crane with a rigged lattice extension..............................................137
		3.10.1 Driving route....................................................................................138
		3.10.2 Boom positions and axle loads....................................................................139
			Notes on the tables.................................................................................139
			8.7 m swing-away lattice extension.................................................................140
			15 m swing-away lattice extension.................................................................141
		3.10.3 Driving the rigged crane.........................................................................142
			Closing the slewing gear brake......................................................................142
			Retracting the outriggers...........................................................................142
			Switching over the suspension locking system........................................................143
			Switching on separate steering......................................................................144
			Driving.............................................................................................145
			Align free on wheels truck crane horizontally.......................................................146
			Supporting the truck crane.........................................................................147
	3.11 Finding and eliminating malfunctions...................................................................149
	3.12 Maintenance work.......................................................................................151
		3.12.1 Modules in need of protection during cleaning work...............................................151
		3.12.2 Maintenance work M 1, monthly....................................................................152
			Pins................................................................................................152
		3.12.3 Maintenance work M 12, every twelve months.......................................................153
			Lubricate joints on section1.......................................................................153
4 Boom extension................................................................................................157
	4.1 Identification and slinging points......................................................................157
		4.1.1 Identification....................................................................................157
		4.1.2 Slinging points...................................................................................158
	4.2 Assembly of boom extensions.............................................................................159
	4.3 Checklists for rigging work.............................................................................161
		4.3.1 CHECKLIST: 21m rigging of boom extension.........................................................161
		4.3.2 CHECKLIST: 21m removing boom extension...........................................................165
	4.4 Description of rigging work.............................................................................169
		4.4.1 Installing/removing section3.....................................................................169
			Removing............................................................................................169
		4.4.2 Installing/removing the lattice extension for the boom extension.................................170
			Removing............................................................................................171
		4.4.3 Hydraulic connection at the boom extension........................................................172
			Establishing a connection...........................................................................172
			Disconnecting.......................................................................................173
		4.4.4 Electrical connection at the boom extension.......................................................174
			Establishing a connection...........................................................................174
			Disconnecting.......................................................................................175
		4.4.5 Fold the deflection sheave in/out on section3....................................................176
			Folding out the deflection sheave...................................................................176
			Folding in the deflection sheave....................................................................176
		4.4.6 Fitting/removing the hoist rope...................................................................177
			Positioning the hoist rope..........................................................................177
			Removing the hoist rope.............................................................................177
			Possible reeving methods............................................................................178
	4.5 Working with the boom extension.........................................................................179
	4.6 Driving with rigged crane and rigged boom extension.....................................................181
		4.6.1 Route.............................................................................................182
		4.6.2 Boom positions and axle loads.....................................................................183
			Notes on the tables.................................................................................183
			21 m boom extension.................................................................................184
		4.6.3 Driving the rigged crane..........................................................................185
	4.7 Maintenance work........................................................................................187
		4.7.1 Maintenance work M1, monthly.....................................................................187
5 Auxiliary single-sheave boom top..............................................................................191
	5.1 Identification..........................................................................................191
	5.2 Installing/removing auxiliary single-sheave boom top....................................................193
		5.2.1 Installing the auxiliary single-sheave boom top...................................................193
		5.2.2 Removing the auxiliary single-sheave boom top.....................................................194
	5.3 Rigging the auxiliary single-sheave boom top............................................................195
		5.3.1 Rigging in transport position.....................................................................195
		5.3.2 Rigging in working position.......................................................................196
		5.3.3 Attaching and removing the hoist rope.............................................................197
		5.3.4 Setting the RCL...................................................................................197
		5.3.5 Possible reeving methods on the auxiliary single-sheave boom top..................................198
		5.3.6 Lifting limit switch and anemometer...............................................................199
			For operation.......................................................................................199
			For transport.......................................................................................199
			Anemometer..........................................................................................199
	5.4 Operation with the auxiliary single-sheave boom top.....................................................201
	5.5 Turning loads with the auxiliary single-sheave boom top.................................................203
		5.5.1 Prerequisites.....................................................................................203
		5.5.2 Setting the RCL...................................................................................204
		5.5.3 Turning a load....................................................................................206
	5.6 Driving the rigged crane with a rigged auxiliary single- sheave boom top................................209
6 Heavy load lattice extension..................................................................................213
	6.1 Identification..........................................................................................213
	6.2 Attaching and securing the heavy load lattice extension.................................................215
		6.2.1 Slinging point....................................................................................215
		6.2.2 Folding in/out rope attachment point..............................................................216
			Folding out rope attachment point..................................................................216
			Folding in rope attachment point...................................................................216
		6.2.3 Securing the heavy load lattice extension with guide rope.........................................217
	6.3 Installing / removing the heavy load lattice extension..................................................219
		6.3.1 Installing the heavy load lattice extension.......................................................219
		6.3.2 Removing the heavy load lattice extension.........................................................221
	6.4 Rigging the heavy load lattice extension................................................................223
		6.4.1 Rigging in transport position.....................................................................223
		6.4.2 Rigging in working position.......................................................................226
		6.4.3 Setting the angle position of the heavy load lattice extension....................................229
			Installing/removing the chain hoist.................................................................229
			Prerequisites.......................................................................................230
			Setting 40 angle...................................................................................230
			Setting 0 angle....................................................................................231
		6.4.4 Attaching and removing the hoist rope.............................................................232
			Possible reeving methods on the heavy load lattice extension........................................233
		6.4.5 Lifting limit switch and anemometer...............................................................234
			For operation.......................................................................................234
			For transport.......................................................................................234
			Anemometer..........................................................................................234
		6.4.6 Transportation on a separate vehicle..............................................................235
	6.5 Operation with the heavy load lattice extension.........................................................237
		6.5.1 Setting the RCL...................................................................................238
		6.5.2 Raising and setting down the main boom............................................................239
			Raising.............................................................................................239
			Setting down........................................................................................239
		6.5.3 Telescoping with rigged heavy load lattice extension..............................................240
		6.5.4 Information about the RCL shutdown................................................................241
		6.5.5 Procedure if the permissible wind speed is exceeded...............................................241
		6.5.6 Information about the main boom operation when the heavy load lattice extension is folded/r.......242
			Folded..............................................................................................242
			Rigged..............................................................................................242
	6.6 Turning loads with the heavy load lattice extension.....................................................245
		6.6.1 Prerequisites.....................................................................................245
		6.6.2 Setting the RCL...................................................................................246
		6.6.3 Turning a load....................................................................................248
	6.7 Driving with rigged crane and rigged heavy load lattice extension.......................................251
7 Index.........................................................................................................255
	A...........................................................................................................257
	B...........................................................................................................257
	E...........................................................................................................257
	H...........................................................................................................257
	I...........................................................................................................258
	L...........................................................................................................258
	M...........................................................................................................260
	O...........................................................................................................260
	P...........................................................................................................260
	S...........................................................................................................260
	T...........................................................................................................260

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V