Grove Crane RT 530E Operator’s & Safety Handbook Manual – PDF DOWNLOAD

Description

Grove Crane RT 530E Operator’s & Safety Handbook Manual – PDF DOWNLOAD

FILE DETAILS:

Grove Crane RT 530E Operator’s & Safety Handbook Manual – PDF DOWNLOAD

Language : English
Pages : 72
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Grove Crane RT 530E Operator’s & Safety Handbook Manual – PDF DOWNLOAD

FOREWORD:

This handbook has been compiled to assist you in properly operating and maintaining your Grove
Crane.

• Before placing the crane in service, take time to thoroughly familiarize yourself with the contents
  of this manual. After all sections have been read and understood, retain the manual for future
  reference in a readily accessible location.
• The Grove Crane has been designed for maximum performance with minimum maintenance. With proper
  care, years of trouble-free service can be expected.
• Constant improvement and engineering progress makes it necessary that we reserve the right to make
  specification and equipment changes without notice.
• Grove Worldwide and our Dealer Network want to ensure your satisfaction with our
  products and customer support. Your local dealer is the best equipped and most knowledgeable to
  assist you for parts, service and warranty issues. They have the facilities, parts, factory trained
  personnel, and the information to assist you in a timely manner. We request that you first contact
  them for assistance. If you feel you need factory assistance, please ask the dealer’s service
  management to coordinate the contact on your behalf.
• Engine operating procedures and routine main separate manual with each crane, and
  should be referred to for detailed information.

TABLE OF CONTENTS:

Grove Crane RT 530E Operator’s & Safety Handbook Manual – PDF DOWNLOAD

Section 1 – INTRODUCTION
GENERAL 1-1
NOISE VIBRATION TEST RESULTS 1-1
Section 2: SAFETY PRECAUTIONS
GENERAL 2-1
OPERATOR’S INFORMATION 2-1
OPERATOR’S QUALIFICATIONS 2-2
CRANE STABILITY/STRUCTURAL STRENGTH 2-3
Load Charts 2-4
Work Site 2-5
Lifting Operations 2-5
Counterweight 2-6
Multiple Crane Lifts 2-6
LOAD MOMENT INDICATING SYSTEMS 2-6
Two-Blocking 2-6
Work Area Definition System 2-7
ELECTROCUTION HAZARD 2-7
Set Up and Operation 2-8
Electrocution Hazard Devices 2-8
Electrical Contact 2-9
Special Operating Conditions and Equipment 2-9
CRUSHING HAZARDS 2-10
PERSONNEL HANDLING 2-11
TRAVEL OPERATION 2-11
MAINTENANCE 2-12
Service and Repairs 2-12
Lubrication 2-13
Tires 2-13
Wire Rope 2-13
BATTERIES 2-14
ENGINE 2-15
WORK PRACTICES 2-15
Crane Access 2-15
Job Preparation 2-15
Working 2-15
Lifting 2-16
Hand Signals 2-17
TRANSPORTING THE CRANE 2-17
SHUTDOWN 2-17
BOOM EXTENSION/JIB 2-18
COLD WEATHER OPERATION 2-19
Section 3 – CAB CONTROLS AND INDICATORS
ENGINE CONTROLS AND INDICATORS 3-1
Hand Throttle Lock Control 3-1
Engine Oil Pressure Gauge 3-1
Transmission Oil Temperature Gauge 3-1
Fuel Gauge 3-1
Voltmeter 3-1
Ignition Switch 3-1
Tachometer 3-4
Engine Coolant Temperature Gauge 3-4
vi
Foot Throttle Pedal 3-4
Drivetrain Distress Indicator 3-4
Hourmeter 3-4
CRANE CONTROLS AND INDICATORS 3-4
Crane Function Power Switch 3-4
Transmission Shift Lever 3-4
Telescope or Auxiliary Hoist Control Lever 3-4
Swing Control Lever 3-4
Rear Steer Control Switch 3-4
Rear Wheels Not Centered Indicator 3-4
Auxiliary Hoist Switch (Optional) 3-5
Boom Lift Control Lever 3-5
Main Hoist Control Lever 3-5
Telescope Control Pedal 3-5
Hydraulic Boost Switch 3-5
Hoist 3rd Wrap Indicator (Optional w/CE) 3-5
Hoist Rotation Indicators 3-5
Transmission Range Selector Switch 3-5
Differential Lock Control Switch 3-5
Outrigger Selector Panel 3-5
Outrigger Extend/Retract Switch 3-6
Swing Brake Control Switch 3-6
Swing Brake Pedal 3-6
Brake Foot Pedal 3-6
Main Brake Fail Indicator 3-6
Park Brake Control Switch 3-6
Pin Swing Lock Control (Pin Type) 3-6
360 Degree Swing Lock Control (Positive Lock Type) (Optional) 3-6
Load Moment Indicating (LMI) and Work Area Definition System Control Panel 3-6
ACCESSORY CONTROLS AND INDICATORS 3-7
Headlights Switch 3-7
Boom Light Switch (Optional) 3-7
Work Light Switch 3-7
Cab Circulating Fan 3-7
Horn 3-7
Backup Alarm (Not Shown) 3-7
Turn Signal Lever and Windshield Wiper/Washer Controls 3-7
Hazard Lights Switch 3-7
Right Turn Signal Indicator 3-7
Left Turn Signal Indicator 3-7
Cab Dome Light 3-7
Skylight Wiper (Not Shown) 3-7
Bubble Level Indicator 3-8
Heat Control Knob 3-8
Fan Switch 3-8
Defroster Switch 3-8
Air Conditioning Control Switch (Optional) 3-8
Spotlight (Optional) (Not Shown) 3-8
Beacon Light (Optional) 3-8
Fire Extinguisher 3-8
Defroster Fan 3-8
Windshield Wiper 3-8
vii
Section 4 – OPERATING PROCEDURES
PRE-STARTING CHECKS 4-1
Fuel Supply 4-1
Engine Oil 4-1
Engine Coolant 4-1
Batteries 4-1
Signal and Running Lights 4-1
Foot and Parking Brakes 4-1
Daily Lubrication 4-1
Hydraulic Reservoir and Filter 4-1
Tires 4-1
Wire Rope 4-1
Hook Block 4-1
Air Cleaner 4-1
COLD WEATHER OPERATION 4-1
Operation Below -40°C 4-2
Operation Below -40°F 4-2
ENGINE OPERATION 4-2
Starting Procedure 4-2
Cold Weather Starting 4-2
Idling the Engine 4-3
Racing the Engine 4-3
Shutdown Procedure 4-3
CRANE TRAVEL OPERATION 4-3
Traveling – General 4-3
Traveling With Boom Extension Erected 4-4
Extended Travel 4-4
Moving the Crane 4-4
Steering 4-4
Front Wheel Steering 4-4
Rear Wheel Steering 4-4
Four Wheel Steering 4-5
Crabbing 4-5
Traveling – Forward 4-5
Traveling – Reverse 4-5
Four-Wheel Drive Operation 4-5
Proper Operation of Axle Oscillation Lockouts 4-5
GENERAL CRANE OPERATION 4-6
Pump Drive 4-6
Setting the Park Brake When Crane is on Outriggers 4-6
Control Lever Operation 4-6
Preload Check 4-6
USING YOUR LOAD CHART 4-7
CRANE FUNCTIONS 4-8
Setting the Outriggers 4-8
Engaging the Mid-Extend Lock Pin 4-9
Stowing the Outriggers 4-9
Stowing the Mid-Extend Lock Pin 4-9
Swinging the Boom 4-10
Elevating and Lowering the Boom 4-10
Elevating the Boom 4-10
Lowering the Boom 4-10
Telescoping the Boom 4-11
Extending the Boom 4-11
viii
Retracting the Boom 4-11
Telescope Control Pedal 4-11
Lowering and Raising the Cable 4-11
Lowering the Cable 4-11
Raising the Cable 4-11
Operational Aids 4-11
Load Moment Indicator (LMI) System 4-11
Control Lever Lockout System 4-12
Stowing and Parking 4-12
Section 5 – LUBRICATION
GENERAL 5-1
LUBRICATION POINTS 5-1
WIRE ROPE LUBRICATION 5-7
Section 6 – SET-UP AND INSTALLATION PROCEDURES
GENERAL 6-1
INSTALLING CABLE ON THE HOIST 6-1
CABLE REEVING 6-1
DEAD-END RIGGING/WEDGE SOCKETS 6-3
Installing Wedge and Socket 6-3
ERECTING AND STOWING THE BOOM EXTENSION 6-5
Erecting 6-5
Stowing 6-6
Setting the Offset 6-10
Changing Boom Extension From Telescoping Type To Fixed Type 6-10
Setting the Telescoping Extension Length 6-10
Extending 6-10
Stowing 6-11

Customer Support: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V