Honda VT700C VT750 ’84 Shop Manual – PDF DOWNLOAD

Description

Honda VT700C VT750 ’84 Shop Manual – PDF DOWNLOAD

DESCRIPTION:

Honda VT700C VT750 ’84 Shop Manual – PDF DOWNLOAD

IMPORTANT SAFETY NOTICE-

WARNING

Indicates a strong possibility of severe personal injury or loss of life if instructions are not followed.

CAUTION:

Indicates a possibility of personal injury or equipment damage if instructions are not followed

NOTE:

Gives helpful information.

Detailed descriptions of standard workshop procedures, safety principles and service operations are not included. It is important to note that this manual contains some warnings and cautions against some specific service methods which could cause PERSONAL INJURY to service personnel or could damage a vehicle or render it unsafe. Please understand that those warnings could not cover all conceivable ways in which service, whether or not recommended by Honda might be done or of the possibly hazardous consequences of each conceivable way, nor could Honda investigate all such ways. Anyone using service procedures or tools, whether or not recommended by Honda must satisfy himself thoroughly that neither personal safety nor vehicle safety will be jeopardized by the service methods or tools selected.

HOW TO USE THIS MANUAL

• This manual is based on the ’83 VT750C. Any information that differs between the after ’83 models is called out in the text or in a note. Follow the Maintenance Schedule (Section 3) recommendations to ensure that the vehicle is in peak operating condition and the emission levels are within the standards set by the U.S. Environmental Protection Agency. Performing the first scheduled maintenance is very important.
• It compensates for the initial wear that occurs during the break-in period. Sections 1 through 3 apply to the whole motorcycle, while sections 4 through 21 describe parts of the motorcycle, grouped according to location. Find the section you want on this page, then turn to the table of contents on page 1 of that section. Most sections start with an assembly or system illustration, service information and troubleshooting for the section.
• The subsequent pages give detailed procedures. If you are not familiar with this motorcycle, read the Technical Features in section 23. If you don’t know the source of the trouble, go to section 24, Troubleshooting.
• All information, illustrations, directions and specifications included in this publication are based on the latest product information available at the time of approval for printing. HONDA MOTOR CO., LTD. reserves the right to make changes at any time without notice and without incurring any obligation whatever. No part of this publication may be reproduced without written permission.

1. GENERAL INFORMATION

GENERAL SAFETY
SERVICE RULES
MODEL IDENTIFICATION
SPECIFICATIONS
TORQUE VALUES
TOOLS
CABLE & HARNESS ROUTING
EMISSION CONTROL SYSTEMS
GENERAL SAFETY

SERVICE RULES

1. Use genuine HONDA or HONDA-recommended parts and lubricants or their equivalents. Parts that do not meet HONDA’s design specifications may damage the motorcycle. 2. Use the special tools designed for this product.

3. Use only metric tools when servicing this motorcycle. Metric bolts, nuts, and screws are not interchangeable with English fasteners. The use of incorrect tools and fasteners may damage the motorcycle.

4. Install new gaskets, O-rings, cotter pins, lock plates, etc. when reassembling.

5. When tightening bolts or nuts, begin with the larger-diameter or inner bolts first, and tighten to the specified torque diagonally, unless a particular sequence is specified

6. Clean parts in cleaning solvent upon disassembly. Lubricate any sliding surfaces before reassembly.

7. After reassembly, check all parts for proper installation and operation
TABLE OF CONTENTS:

Honda VT700C VT750 ’84 Shop Manual – PDF DOWNLOAD

GENERAL INFORMATION 1111
LUBRICATION ID
MAINTENANCE
FUEL SYSTEM
ENGINE REMOVAL/INSTALLATION
COOLING SYSTEM a
CLUTCH SYSTEM – ALTERNATOR/STARTER CLUTCH – GEARSHIFT LINKAGE D
CYLINDER HEAD/VALVE 11•1
I CYLINDER/PISTON Ill
I CRANKCASE lfl
I CRAN KS HAFT/TRANSMISSION Iii
FINAL DRIVE
FRONT WHEEL/SUSPENSION
REAR WHEEL/SUSPENSION/BRAKE
HYDRAULIC BRAKES
BATTERY/CHARGING SYSTEM
IGNITION SYSTEM
ELECTRIC STARTER
SWITCHES
WIRING DIAGRAM f!I
TECHNICAL FEATURES fll
TROUBLESHOOTING fll

Contact us: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.M