Husqvarna Service Manual Models – 265 250 240/245 225 / 232 / 235 / 240 RBD 122 32 Mondo 235 P 225 H 60 / 225 H 75 – Brush Cutters, Trimmers, Pruners, Hedge Trimmers DOWNLOAD !!

Description

Husqvarna Service Repair Workshop Manual Models – 265 250 240/245 225 / 232 / 235 / 240 RBD 122 32 Mondo 235 P 225 H 60 / 225 H 75 – Brush Cutters, Trimmers, Pruners, Hedge Trimmers DOWNLOAD !!

FILE DETAILS:

LANGUAGE:ENGLISH
PAGES:166
DOWNLOADABLE:YES
FILE TYPE:PDF

DESCRIPTION:

Husqvarna Service Repair Workshop Manual Models – 265 250 240/245 225 / 232 / 235 / 240 RBD 122 32 Mondo 235 P 225 H 60 / 225 H 75 – Brush Cutters, Trimmers, Pruners, Hedge Trimmers 

Fire risk:

Handle fuel with respect as it is extremely inflammable. Do not smoke and ensure there are no open flames or sparks in the vicinity. Make sure there is a working fire extinguisher close at hand. Do not try to extinguish a petrol fire with water.

Poisonous fumes:

When using cleaning agents read the instructions carefully. Ensure there is good ventilation when handling petrol and other volatile fluids. The engine’s exhaust fumes are poisonous. Test run the engine outdoors.

Contact faces and gaskets:

Ensure all surfaces are clean and free from gasket residue, etc. When cleaning use a tool that will not damage the contact face. Any scratches or unevenness should be removed using a flat fine cut file.

Sealing rings:

Always replace a sealing ring that has been dismantled. The sensitive sealing lip can easily be damaged resulting in inferior sealing capacity. Surfaces which the seal shall seal against must also be completely undamaged. Lubricate the sealing lip with grease before it is fitted and ensure that it is not damaged e.g. by shoulders and splines on a shaft. Use tape or a conical sleeve as protection. It is important that the sealing ring faces in the right direction for it to act as it is intended.

TABLE OF CONTENTS:

Husqvarna Service Repair Workshop Manual Models – 265 250 240/245 225 / 232 / 235 / 240 RBD 122 32 Mondo 235 P 225 H 60 / 225 H 75 – Brush Cutters, Trimmers, Pruners, Hedge Trimmers 

Contents
Dismantling
General 4
Model 265
Dismantling 4
Assembly 5
Model 250
Dismantling 7
Assembly 8
Models 240/245
Dismantling 9
Assembly 10
Models 225, 232, 235, 240
Dismantling 11
Assembly 12
Model 122
Dismantling 13
Assembly 14
Models 32, Mondo
Dismantling 15
Assembly 17
Assembly, general 19
Replace the drive pawls 19
Checking the spark 22
Replacing the spark plug cover 24
Dismantling 25
Drive dogs 27
Assembly 28
Air filter 32
Tank venting 33
Fuel filter 35
Primer pump 35
Carburettor 36
Dismantling all models 36
Metering unit 37
Mixing venturi 38
Pump unit 38
Stripping 38
Reassembling 41
Assembly 45
Carburettor settings 49
Function 49
Basic setting 49
Fine adjustment 50
Max. speed 50
Low speed needle L 50
High speed needle H 50
Idling screw T 50
Correctly adjusted carburettor 50
CARB-designed carburettor 51
After replacing the complete carburettor 51
After replacing only the H needle 52
After replacing the H and L needles 53
After replacing only the L needle 54
Throttle 55
Clutch, model 265 62
Dismantling 62
Assembly 63
Clutch drum, model 265 64
Drive axle, model 265 65
Clutch, model 250 65
Clutch drum, model 250 68
Clutch, models 240/245 69
Clutch drum, models 240/245 70
Clutch, models 225/232 71
Clutch, model 235 73
Clutch, model 240 RBD 76
Clutch drum, models 225/232/235 76
Clutch drum, model 240 RBD 76
Clutch drum, models 225 H 60, H 75 76
Clutch drum, model 235 P 76
Clutch, model 122 77
Clutch drum, model 122 78
Clutch, models 32 and Mondo 79
Clutch drum, models 32 and Mondo 81
All models 84
Dismantling, model 265 84
Assembling, model 265 86
Dismantling, assembling, models 250, 240/245 88
Dismantling, assembling, models 225/232 89
Dismantling, assembling, models 122, 32, 235 90
Dismantling, general 94
Dismantling, Models 250, 265 94
Cleaning, inspection, Models 250, 265 95
Assembling, Models 250, 265 96
Dismantling, Models 240/245 96
Cleaning, inspection, Models 240/245 97
Assembling, Models 240/245 97
Dismantling, Models 225/232/235/240RBD 98
Cleaning, inspection, Models 225/232/235/240RBD 99
Assembling, Models 225/232/235/240RBD 100
Dismantling, Model 122 101
Cleaning, inspection, Model 122 102
Assembling, Model 122 102
Dismantling, Model 32 103
Cleaning, inspection, Model 32 104
Assembling, Model 32 104
Dismantling, Model Mondo 104
Cleaning, inspection, Model Mondo 106
Assembling, Model Mondo 106
Analysis and actions 108
Service advice 113
Wear tolerances 113
Replacing the sealing ring – ignition side, model 265 116
Replacing the sealing ring – ignition side, model 250 117
Replacing the sealing ring – clutch side, model 265 118
Replacing the sealing ring – clutch side, model 250 118
Replacing the vibration damper, model 250 119
Stripping the crankcase, model 265 119
Reassembling the crankcase, model 265 120
Stripping the crankcase, model 250 122
Reassembling the crankcase, model 250 123
Inspecting the crankshaft 124
Dismantling the crankshaft, model 240/245 124
Assembling the crankshaft, model 240/245 125
Dismantling the crankshaft, model 225/232/235 127
Assembling the crankshaft, model 225/232/235 128
Stripping the crankcase, model 122 129
Reassembling the crankcase, model 122 130
Stripping the crankcase, model 32 131
Reassembling the crankcase, model 32 133
Stripping the crankcase, model Mondo 135
Reassembling the crankcase, model Mondo 136
Leakage testing the crankcase 137
Hydraulic pump, Dismantling, assembling, model 235P 140
Control valve operation, model 235 P 142
Replacing the clutch drum and bearing, model 235P 143
Capacity test, model 235P 144
Dismantling the gearbox, model 225 H60/H75 146
Assembling the gearbox 148
Replacing the scissor blade, model 235P 148
Replacing the pressure blade, model 235P 149
Replacing seals in the hydraulic cylinder, model 235P
Dismantling 149
Assembling 150
Angle gear/gearbox 154
Centrifugal clutch/general 155
Bearings/crankcase/vib. damper/crankshaft 156
Sealing ring 157
Fuel system/ignition system 158
Leakage testing 159
Hydraulic unit/cutting equipment 160
Cylinder/piston, workshop equipment 161

HUSQVARNA SERVICE MANUAL MODELS – 265 250 240/245 225 / 232 / 235 / 240 RBD 122 32 MONDO 235 P 225 H 60 / 225 H 75 – BRUSH CUTTERS, TRIMMERS, PRUNERS, HEDGE TRIMMERS DOWNLOAD !!:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]