John Deere 260E & 310E Articulated Dump Trucks Operator’s Manual PDF

Description

John Deere 260E & 310E Articulated Dump Trucks Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

• P/N: OMT329817X19_22
• Language: English
• Division: Construction
• Product Lines: Articulated Dump Trucks
• Publication Type: Operator’s Manuals
• Associated Models: 260E, 310E
• Series: 0
• Serial:
  • PIN: 1DW260EX_ _F677827—708124
  • PIN: 1DW310EX_ _F677827—708124
• For complete service information also see: PC15087, PC15088

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

John Deere 260E & 310E Articulated Dump Trucks Operator’s Manual – PDF DOWNLOAD

Contents 25
Safety and Operator Convenience Features 29
Safety and Operator Convenience Features 29
Safety—General Precautions 30
Information for European Union Directives and Eurasian Economic Union Technical Regulations Compliance 30
Recognize Safety Information 31
Follow Safety Instructions 32
Add Cab Guarding for Special Uses 32
Operate Only If Qualified 32
Wear Protective Equipment 33
Protect Against Noise 33
Avoid Unauthorized Machine Modifications 33
Inspect Machine 34
Stay Clear of Moving Parts 34
Avoid High-Pressure Fluids 34
Avoid High-Pressure Oils 35
Work In Ventilated Area 35
Handle Starting Fluid Safely 35
High Debris Applications 36
Avoid Static Electricity Risk When Refueling 36
Prevent Fires 37
In Case of Machine Fire 37
Prevent Battery Explosions 38
Handle Chemical Products Safely 38
Decommissioning — Proper Recycling and Disposal of Fluids and Components 39
Exhaust Filter Ash Handling and Disposal 39
Prepare for Emergencies 39
Clean Debris from Machine 40
Safety—Operating Precautions 41
Use Steps and Handholds Correctly 41
Start Only From Operator’s Seat 41
Use and Maintain Seat Belt 41
Prevent Unintended Machine Movement 42
Avoid Work Site Hazards 43
Avoid Power Lines 44
Keep Riders Off Machine 44
Prevent Acid Burns 45
Avoid Backover Accidents 45
Avoid Machine Tip Over 46
Operating on Slopes 46
Operating in Water and Mud 46
Operating or Traveling On Public Roads 47
Inspect and Maintain ROPS 47
Travel Safely 47
Add and Operate Attachments Safely 47
Safety—Maintenance Precautions 48
Park and Prepare for Service Safely 48
Service Machines Safely 48
Use Proper Lifting Equipment 49
Service Cooling System Safely 49
Remove Paint Before Welding or Heating 49
Make Welding Repairs Safely 50
Drive Metal Pins Safely 50
Service Tires Safely 51
Clean Exhaust Filter Safely 52
Safety—Safety Signs and Other Instructions 53
Safety Signs and Other Instructions 53
Operation—Operator’s Station 63
Operator Controls 63
Operator Control Functions 64
Sealed Switch Module (SSM) 65
Primary Display Unit (PDU) 68
Primary Display Unit (PDU) Functions 69
Steering Column Lever 72
Pedals 73
Operator Seat and Instructional Seat 74
Cab Door Release 75
Cab Door Stop Adjustment 75
Opening Side Window/Alternative Exit 76
Opening Rear Side Window 76
Radio—If Equipped 77
Rear View Monitor—If Equipped 79
12-Volt Auxiliary Power Outlet 80
Fire Extinguisher Mounting Location 80
Operation—Operating the Machine 81
Before Starting Work 81
Hood Operation 81
Inspect Machine Daily Before Starting 82
Engine Break-In Period 82
Starting Engine 83
Required Machine Stop Warning 84
Stopping Engine 86
Exhaust Filter 87
Selective Catalytic Reduction (SCR) System Overview 89
Qualified Emergency Use — SCR Override Option 91
Service ADVISOR™ Remote (SAR) Software Delivery Process 92
Engine Block Heater—If Equipped 92
Cold Weather Warm-up 93
Diesel Fired Coolant Heater (DFCH) Operation—If Equipped 94
Replace Start Aid Can—If Equipped 96
Parking the Machine 96
Battery Disconnect Switch 97
Warming Hydraulic System 97
Air Conditioner and Heater Operation 98
Driving the Machine 99
Steering Machine 100
Shifting the Transmission 101
Using Gear Hold and Gear Range 102
Using Operator Speed Control 103
Using Differential Lock 103
Slowing and Stopping the Machine 105
Operating on a Hill 106
Off-Road Operation 107
Loading and Unloading Dump Body 108
Dump Body Manual Lowering Procedure 108
Dump Body Control 109
Using Onboard Weighing (OBW) System—If Equipped 111
Machine Light Operation 112
Freeing Stuck Machine 114
Towing Machine 115
Removing Drive Shafts for Towing 116
Mechanically Releasing Park Brake 117
Lifting the Machine 118
Loading and Unloading Machine for Transport 119
Lock All Compartments 120
Operation—Monitor Operation 121
Aftertreatment Indicators Overview 121
Primary Display Unit (PDU) Display 122
Primary Display Unit (PDU) Display Messages 123
Information—Machine Settings 124
Information—Operator Training 124
Main Menu 125
Operation—Stop Watch 125
Operation—Job Timer 125
Operation—Exhaust Filter 126
Operation—Exhaust Filter Auto Cleaning 126
Operation—Exhaust Filter Parked Cleaning 127
Operation—Exhaust Filter Emergency Override 128
Operation—Trip Counters 128
Operation—Life Counters 128
Operation—Reverse Fan—If Equipped 129
Diagnostics—Codes 129
Diagnostics—Controller ID 130
Diagnostics—Machine ID 130
Diagnostics—JDLink™ System Info 131
Diagnostics—Software Delivery 131
Diagnostics—Battery Monitor 131
Diagnostics—Tire Sensors—If Equipped 132
Setup—Monitor 133
Setup—Antitheft/Security 134
Setup—Operator Settings 135
Setup—Test and Setup 135
Maintenance—Machine 136
Required Emission-Related Information 136
Alternative and Synthetic Lubricants 136
Hydraulic Oil 137
Transmission Oil 138
Grease 138
Axle and Final Drive Oil 139
Lubricant Storage 139
Mixing of Lubricants 139
Diesel Fuel 140
Diesel Fuel Specifications 140
Lubricity of Diesel Fuel 141
Handling and Storing Diesel Fuel 141
Biodiesel Fuel 142
Testing Diesel Fuel 143
Supplemental Diesel Fuel Additives 143
Fuel Filters 143
Minimizing the Effect of Cold Weather on Diesel Engines 144
Diesel Exhaust Fluid (DEF) — Use in Selective Catalytic Reduction (SCR) Equipped Engines 145
Refilling Diesel Exhaust Fluid (DEF) Tank 146
Testing Diesel Exhaust Fluid (DEF) 147
Storing Diesel Exhaust Fluid (DEF) 147
Disposal of Diesel Exhaust Fluid (DEF) 148
John Deere Break-In Plus™ Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V 148
Diesel Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V 149
Engine Oil and Filter Service Intervals — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V Engines 150
Diesel Engine Oil Service Interval for Operation at High Altitude 150
Oil Filters 151
Diesel Engine Coolant (engine with wet sleeve cylinder liners) 152
Water Quality for Mixing with Coolant Concentrate 153
Operating in Warm Temperature Climates 153
Testing Coolant Freeze Point 154
Disposing of Coolant 154
Maintenance—Periodic Maintenance 155
Service Machine at Specified Intervals 155
Check the Hour Meter Regularly 155
Prepare Machine for Maintenance 156
Fuel Tank 156
Installation and Removal of Dump Body Locking Bar (Pin) 157
Install Articulation Locking Bar 158
Tilt Cab 159
Fluid Analysis Program Test Kits and 3-Way Coolant Test Kit 161
Service Intervals 162
Required Parts 164
Maintenance—As Required 166
Inspect Tires and Check Pressure 166
Check Wheel Bolt Torque 167
Check Service Brake Disc Wear 167
Check Engine Air Cleaner Elements 168
Inspect Serpentine Belt 169
Clean Cooler Cores 170
Drain Primary Fuel Filter With Water Separator 170
Drain Auxiliary Fuel Filter With Water Separator—If Equipped 171
Check Windshield Washer Fluid Level 171
Check Cab Air Filters 172
Check Rear Camera—If Equipped 173
Service Exhaust Filter 173
Inspect Steering Cylinder Seals 174
Clean and Tighten Battery Terminals 174
Maintenance—Every 10 Hours or Daily 175
Check Engine Coolant Level 175
Check Engine Oil Level 176
Check Hydraulic System Oil Level 177
Check Transmission Oil Level 178
Maintenance—Every 50 Hours 179
Lubricate Articulation Joint, Oscillation Joint, and Through-Drive Bearing 179
Lubricate Greasable Steering Cylinder Pins—If Equipped 180
Maintenance—Every 250 Hours 181
Take Engine Oil Sample 181
Maintenance—Initial Service-500 Hours 182
Replace Axle Oil Filters—If Equipped 182
Run Transmission Clutch Calibration 183
Drain and Refill Axle Oil 184
Maintenance—Every 500 Hours 185
Check Hybrid Battery Electrolyte Level—If Equipped 185
Take Fluid Samples 186
Check Air Intake Hoses and Charge Air Cooler Tube Couplings 187
Drain and Refill Engine Oil and Replace Filter 188
Drain and Refill Engine Oil (Quick Service)—If Equipped and Replace Filter 189
Replace Fuel Tank Breather—If Equipped With Fast Fill 189
Replace Primary Fuel Filter with Water Separator 190
Replace Auxiliary Fuel Filter with Water Separator—If Equipped 190
Replace Final Fuel Filter 191
Check Park Brake Pad Wear and Lubricate Linkage 191
Maintenance—Every 1000 Hours 192
Check and Adjust Dump Body Shock Pads 192
Check Coolant Condition 193
Replace Axle Oil Filters—If Equipped 193
Check Axle Oil Levels 194
Maintenance—Every 2000 Hours 195
Drain and Refill Axle Oil 195
Clean and Inspect Axle Breathers 196
Check and Adjust Engine Valve Lash 196
Replace Fuel Tank Breather 196
Clean Axle Pump Suction Screen—If Equipped 197
Drain and Refill Transmission Oil and Replace Filters 198
Drain and Refill Transmission Oil (Quick Service)—If Equipped 199
Replace Transmission Oil Filters 200
Run Transmission Clutch Calibration 200
Access Diesel Exhaust Fluid (DEF) Dosing Unit Filter 200
Replace Diesel Exhaust Fluid (DEF) Dosing Unit Filter 201
Maintenance—Every 4000 Hours 202
Clean Hydraulic Pump Case Drain In-Line Screen 202
Clean Hydraulic Fan Drive Case Drain In-Line Screen 203
Clean Hydraulic System Fill Strainer 204
Replace Hydraulic System Return Filter 205
Drain and Refill Hydraulic System Oil 206
Drain and Refill Hydraulic System Oil (Quick Service)—If Equipped 207
Replace Hydraulic Reservoir Breather 207
Replace Diesel Exhaust Fluid (DEF) Header Suction Filter (S N —XXXXXX) 208
Replace Diesel Exhaust Fluid (DEF) Baffle (S N —XXXXXX) 208
Clean Diesel Exhaust Fluid (DEF) Tank (S N —XXXXXX) 208
Replace Diesel Exhaust Fluid (DEF) Tank Breather Filter 208
Maintenance—Every 6000 Hours 209
Drain and Refill Engine Cooling System 209
Drain and Refill Engine Cooling System (Quick Service)—If Equipped 210
Inspect Driveline Torsional Coupler 211
Miscellaneous—Machine 212
Bleed Fuel System 212
Secondary Steering 212
Lubricate Hinges 213
Verified Anchor Point Information 213
Fluid Sampling Test Ports 213
Do Not Service Control Valves, Cylinders, Pumps, or Motors 215
Do Not Service or Adjust Injection Nozzles or High-Pressure Fuel Pump 215
Precautions for Alternator and Regulator 216
Handling, Checking, and Servicing Batteries Carefully 217
Using Battery Charger 218
Using Booster Batteries—24-Volt System 219
Replacing Batteries 220
Welding on Machine 221
Keep Electronic Control Unit Connectors Clean 221
Replacing Fuses 222
JDLink™ Machine Monitoring System (MMS)—If Equipped 224
Replace Front Turn Signal Bulb, Headlight Bulb, and Front Park Light Bulb 225
Replace Tail and Brake Light and Rear Turn Signal 226
Replace Backup Light and Work Light—If Equipped 226
Replace License Plate Light Bulb—If Equipped 226
Replace Dome Light Bulb 227
Replacing Seat Belt 228
Hardware Torque Specifications 229
Unified Inch Bolt and Screw Torque Values 230
Metric Bolt and Screw Torque Values 231
Miscellaneous—Operational Checkout 232
Operational Checkout 232
Diagnostic Trouble Code Check 232
Operational Checks—Ignition OFF, Engine OFF Checks 232
Operational Checks—Ignition ON, Engine OFF Checks 234
Operational Checks—Ignition ON, Engine ON Checks 236
Miscellaneous—Troubleshooting 246
Troubleshooting Procedure 246
Software Update 246
Engine 247
Transmission 252
Axle 254
Tires 255
Brakes 256
Hydraulic System 257
Electrical System 258
Rear Frame and Cab 260
Miscellaneous—Storage 261
Prepare Machine for Storage 261
Monthly Storage Procedure 262
Preparing Engine for Long-Term Storage 263
Removing Engine From Long-Term Storage 264
Miscellaneous—Serial Numbers 265
Record Product Identification Number (PIN) 265
Record Engine Serial Number 265
Record Transmission Serial Number 265
Record Front Axle Serial Number 266
Record Middle Axle Serial Number 266
Record Rear Axle Serial Number 266
Keep Proof of Ownership 266
Keep Machines Secure 267
Miscellaneous—Specifications 268
260E and 310E Engine Specifications 268
260E Machine Dimensions 270
310E Machine Dimensions 274
260E Machine Specifications 277
310E Machine Specifications 278
260E and 310E Travel Speeds 279
Drain and Refill Capacities 280
Eurasian Economic Union 280
Machine Design Life 281
Page Number 25
Section 1-1 29
Section 1-2 30
Section 1-3 41
Section 1-4 48
Section 1-5 53
Section 2-1 63
Section 2-2 81
Section 2-3 121
Section 3-1 136
Section 3-2 155
Section 3-3 166
Section 3-4 175
Section 3-5 179
Section 3-6 181
Section 3-7 182
Section 3-8 185
Section 3-9 192
Section 3-10 195
Section 3-11 202
Section 3-12 209
Section 4-1 212
Section 4-2 232
Section 4-3 246
Section 4-4 261
Section 4-5 265
Section 4-6 268

S.V 04/24